First Servicing Done on my HIMALAYAN 450 | Full Details, Cost, Issues, Tips

Поділитися
Вставка
  • Опубліковано 5 лют 2025
  • Here's a detailed video of the first servicing for the New Himalayan. The cost, and what all is done in it. You wouldn't believe how cheap it is!
    The first service is done at 500kms or 30 days, which ever comes earlier.
    Also, The Royal Enfield service centre guys don't allow shooting video inside their premises so I did what I could with what I had.
    Now that I got my first servicing done, I cannot wait to push this bike and take it touring! Summer is coming and the mountains are calling!
    .
    Please feel free to comment your requests and I shall make them videos!
    .
    If you liked the video please consider leaving a like and subscribing to the channel. This really helps me grow my channel and connect more with my audience.
    Thank you for your time.
    See you in the next video.
    Here's a playlist for all things Himalayan
    • New Himalayan Shorts
    Follow me on instagram?
    / srinivas_ganesh
    .
    Interested in a comparison video?
    • New Himalayan or Inter...
    .
    Recommended gear for this kind of vlogging setup
    insta360OneX2
    amzn.to/49LLbsD
    insta360OneX2 mic
    amzn.to/3wXTFhC
    DJI mic
    amzn.to/48Rzi37
    Helmet mount
    amzn.to/49O6OIR
    .
    #srinivasganesh #newhimalayan #himalayan450 #royalenfield #royalenfieldnewhimalayan #royalenfieldhimalayan #royalenfieldhimalayan450 #newvideo2024 #newvideos #content #advmotorcycle #adventuremotorcycle #advbike #himalayan450 #himalayan452 #firstservice

КОМЕНТАРІ • 56

  • @chiraganand20
    @chiraganand20 10 місяців тому +3

    I got mine serviced yesterday, They didn't change other O rings except for the oil filter cap. Really loving the sound of exhaust after service.

  • @zard8032
    @zard8032 10 місяців тому +1

    The video was really great and informative!

  • @PramodBisht007
    @PramodBisht007 10 місяців тому +3

    I believe the manual says even after the first service we have to keep engine below 6k rpm till it completes 2000kms.

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому +4

      I push it on and off and do take it about 6k rpm. I saw in one of the YT videos where I learned that it is alright to push it on and off. And I am currently at 1800, so basically completing 2000 in about a day or two. lol

  • @akashmazumdar9917
    @akashmazumdar9917 9 місяців тому

    The irony is, most of us when goes to the showroom with our bikes. Doesn't gets the same treatment as we see in the videos. Those little little things which makes the service experience and service better are mostly lacking at most the showrooms. Glad this bike was serviced well.

    • @SrinivasGanesh
      @SrinivasGanesh  9 місяців тому +1

      this is sad but very true. My rule of thumb is treating people is always the way forward. Kindness always comes back :).

  • @JayPistacio
    @JayPistacio 10 місяців тому

    I love your videos. Great content very informative.
    Btw what camera are you using and helmet camera mount? I like this point of view shot for your video too.

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому

      Helmet camera mount and camera links are in the description. Do check them out. 🫶🏽

  • @ADV_Moto17
    @ADV_Moto17 10 місяців тому +4

    I found out they used premium parts in Himalayan 450
    Brembo brake pads
    DID chain
    Showa suspension
    Excel takasago
    high quality parts has been used on this bike
    No one ever talk about these things

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому +3

      Yep, they do, and yes working on a video on them. :)

  • @sairaj5660
    @sairaj5660 10 місяців тому +3

    mine too is drifting towards right, I am going for my first service tomorrow, any tip on what exactly to ask them regarding this problem?

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому +3

      Tell them bike pulls to the right. And they will do the needful

    • @sairaj5660
      @sairaj5660 10 місяців тому +1

      Thanks mate

  • @vandychhom
    @vandychhom 10 місяців тому +2

    I saw a lot of Himalayan 450 problems would you recommend us to use this bike or not sir?
    Thank you

    • @GavinMarkable
      @GavinMarkable 10 місяців тому +2

      Any new bike will have teething issues which will take a year to iron out

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому +2

      Even I have pointed out so many things that are not that good on this bike, but you know what, I would definitely recommend this bike! It is just so much fun to ride this!!! The value for money is bang on and it just glides over imperfect and perfect roads alike!!

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому

      This too

    • @vandychhom
      @vandychhom 10 місяців тому

      I Like this a lot I think it is time to ride my first Royal Enfield branch. Thanks, man
      @@SrinivasGanesh

  • @asifirfan
    @asifirfan 2 місяці тому

    Can you mention the when to change the gear on which speed ??

    • @SrinivasGanesh
      @SrinivasGanesh  2 місяці тому +1

      We are all blessed with a bunch of gear change indicators. Particularly our ears and our bums. :P We can use those and determine when to change the gears. Jokes apart, ideally I change between 3k-4k RPM

    • @asifirfan
      @asifirfan 2 місяці тому

      @ thanks for the reply

  • @travellife3651
    @travellife3651 9 місяців тому +1

    I got mine yesterday..😅😅😅 Any tips to be followed before the first service

    • @SrinivasGanesh
      @SrinivasGanesh  9 місяців тому

      Keep it under 4500 RPM. And you’re good. 🙌🏽 congratulations!

  • @Tony-cc2xr
    @Tony-cc2xr 10 місяців тому +1

    every how many km should the valves be adjusted? Thank you

  • @a.p.nagarajabalajihardware4530
    @a.p.nagarajabalajihardware4530 9 місяців тому +1

    Isnt it mandatory to check valve clearances

  • @AnshadAnsh-s2t
    @AnshadAnsh-s2t 9 днів тому

    Hi bro, when I ride it feels like the handle bar is slightly left its not straight, so any tips yiu can give me..even tomorrow is my first service

    • @SrinivasGanesh
      @SrinivasGanesh  10 годин тому

      Slightly loosen your handlebar clamps, adjust it to your liking, and tighten them back. All the tools you need are in your tool kit that comes with the bike.

  • @winstoleo3127
    @winstoleo3127 9 місяців тому

    can you share the link or details of your gloves ❤please 🙏🏻

    • @SrinivasGanesh
      @SrinivasGanesh  8 місяців тому

      These gloves are not made anymore though. :(

  • @kishorekunal7194
    @kishorekunal7194 8 місяців тому

    do we need to book/ take appointment before going to service center ?

    • @SrinivasGanesh
      @SrinivasGanesh  8 місяців тому

      Unless you want to wait in a line and have no problems leaving your bike at the service centre.

  • @sachinchavan9415
    @sachinchavan9415 10 місяців тому

    What’s your take on adventure 390

  • @twowheeledparadox
    @twowheeledparadox 10 місяців тому

    That John Connor scene was from the Director's Cut of Terminator 2, wasn't it?

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому +1

      good eye 😎✌🏽

    • @twowheeledparadox
      @twowheeledparadox 10 місяців тому

      @@SrinivasGanesh Yeah, I know that scene isn't in the theatrical cut. Have to go back and watch it again!

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому +1

      @@twowheeledparadox haha awesome!

  • @TheHanleBlack
    @TheHanleBlack 8 місяців тому +1

    Does it have the usb port in the stock bike?

  • @dannyboy-nm2kp
    @dannyboy-nm2kp 14 днів тому

    1521 rupee???? Thats crazy thats like $25 aud, a mechanics wage is like 1900 rupee per hour in aus , the the cheapest i can get motul 3100 oil is 5400 rupee per 4 litre

    • @SrinivasGanesh
      @SrinivasGanesh  10 днів тому

      Damn that is super expensive!! Maybe that is because of importing from IND to AUS?

  • @sooraj4632
    @sooraj4632 8 місяців тому

    Hi brother may I know the ex showroom price and on road price 😅.

    • @SrinivasGanesh
      @SrinivasGanesh  8 місяців тому +1

      I paid INR 2.7L for ex-showroom and INR 3.2L on road.

    • @sooraj4632
      @sooraj4632 8 місяців тому

      @@SrinivasGanesh thank you brother..and may I know like . was that worth every penny 🙂? Pls reply.

    • @SrinivasGanesh
      @SrinivasGanesh  8 місяців тому +1

      @@sooraj4632 yes, that is why I am making video of the bike. I love it.

    • @sooraj4632
      @sooraj4632 8 місяців тому

      And one last question... how's the pillion comfort and what'll be the service cost after free services ...any guesses.

  • @lakhwinderbhatti4359
    @lakhwinderbhatti4359 10 місяців тому

    Mine kamet white pulling towards right, workshop said its common, pathetic. They dont hv anyone there to fix spokes.

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому +2

      damn, you just have to get the wheels aligned. It will be solved.

  • @silverwrath1997
    @silverwrath1997 10 місяців тому

    lekin mai to firse apki video mai bike ki buraii sunne ayya thaa

    • @SrinivasGanesh
      @SrinivasGanesh  10 місяців тому +2

      hahahahahahahaha, well even though maine 15000 galtiyan nikali, but I still bought the bike na, because it is too much fun to ride it! It just glides over imperfect and perfect roads!!!

    • @silverwrath1997
      @silverwrath1997 10 місяців тому

      @@SrinivasGanesh i love your videos keep up the good work