Tamiya TT02 “Top secret”ultimate steering and suspension mod/タミヤ TT02 サスアーム究極秘密公開

Поділитися
Вставка

КОМЕНТАРІ • 118

  • @Haley72692
    @Haley72692 Рік тому +10

    I did these front links and also made rear links that ran from the knuckle to the upper rear arm mount on the diff, made such a big difference and with some homemade tie-rods gives adjustable alignment in every direction

  • @dreammaker608
    @dreammaker608 3 роки тому +5

    Wow! It really works well with mine too!! Very sturdy movement. I love mine TT02 so much better than other high-end machines now. Thank you thank you!!

  • @Zoomer1973
    @Zoomer1973 3 роки тому +2

    Great job, has improved my whole steering, thanks

  • @markd7095
    @markd7095 Рік тому +8

    Great job. Looks great as well. Some part numbers would be helpful for the newbies like myself 😃 I ordered the 5x8x0.1 and 5x8x0.3mm shims as a first step, lets improve 😃

  • @dreammaker608
    @dreammaker608 3 роки тому +2

    I'm going to try it with my Tt02. Thank you!!

  • @Dunky1994
    @Dunky1994 2 роки тому +14

    If you use 0.3mm shims with 5mm ID on the upper plastic arms where it fits to the gearbox cover and 0.1mm shims on the lower arms it removes the slop from that point. The shims only need to fitted to one side and mirrored for the rear. Ive raced at a meeting twice now and it has made such a difference. They will also fit on a TT-01. Core-RC make a set.

    • @simpleisthebest73
      @simpleisthebest73  2 роки тому

      Thanks very much for your comments!

    • @THEGHOSTMAKER1
      @THEGHOSTMAKER1 Рік тому

      With the 0.1mm shims for the lower arms do you no the inner diameter hole? I have all yeah racing bits and find the slop is quite bad on the rear

  • @TastierBackInThe80s
    @TastierBackInThe80s 3 роки тому +3

    Bloody brilliant idea! Thank you for sharing!

  • @rc_michi
    @rc_michi 9 місяців тому

    Awesome advice. Thanks for showing. I will also try! 👍

  • @Fullsendson
    @Fullsendson 3 роки тому +2

    Thank you 🙏 Its people like you that make sure people like me dont spend so much money 😅🙏also Saved me alot of frustration and time too

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому

      Thank you for subscribe to my channel and good comment. Wish you best of luck, and everything work out for you well.

  • @stevenzacharakis
    @stevenzacharakis 11 місяців тому +1

    Thanks for this trick.
    I did it today putting ball joints and a washer on top.
    Mines coupled with a steering kit though. Slop be gone!
    My turnbuckles end up being 57mm

  • @chipsnpeasifuplz
    @chipsnpeasifuplz 3 роки тому +8

    This is a much needed mod on ta01 and ta02 chassis.
    Interestingly this is kinda what you call a compression strutt. I have them on my actual mk2 escort and they replace the anti roll bar.

    • @darrenbayman8988
      @darrenbayman8988 5 місяців тому +1

      Actually in this orientation, as with your Escort they are tension struts. Compression struts would run from the suspension arm rearward to the chassis.
      They work wonders on Escorts, as you are no doubt aware. You can also lower the front attachment point slightly and gain an element of anti dive.

  • @irritablearchitect
    @irritablearchitect 3 роки тому

    Mechanic After Hours brought me here...I may try this. THNX.

  • @mlubecke
    @mlubecke Рік тому +1

    Brilliant. Thank you so much for sharing….

  • @Bl4keBelladonna
    @Bl4keBelladonna Рік тому

    thats actually genius , thanks mate :)

  • @TheModelRocketeer
    @TheModelRocketeer 2 роки тому

    Thanks! Great video. 🙌

  • @leonardsrcgarage1919
    @leonardsrcgarage1919 2 роки тому +1

    Brilliant! Thank you for this!

  • @andrewmagro7703
    @andrewmagro7703 3 роки тому +1

    really like this video bro, what shocks are those you have on this TT02? they look good !

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому +2

      Thanks my friend! These are Tamiya shocks that I bought 25 years ago in Japan.

  • @freddieparrydrums
    @freddieparrydrums 2 роки тому

    Bro you’re a legend!

  • @dreammaker608
    @dreammaker608 3 роки тому +2

    This setup also help adjust casters setting!

  • @user-xu9jl3ob6n
    @user-xu9jl3ob6n 3 роки тому +1

    日本語で失礼します、ノッキーさんの所でコメントされていたので、気になって見に来ました。
    フロントトルクロッドが思っていたよりもずっと洗練されついて驚きました、ボトム時にキャスターが立ち上がる方向になりますね、自分も此方が好きですが、ノッキーさんはキャスターが増えるのが好みの様ですので、次回TTの動画が楽しみです、他のラジコン動画も気になる物ばかりですね、ベンツ190の海外仕様キットは自分も欲しかったのですが、日本仕様は昔スペアボディーで販売していたディーべルスアルトがキットで発売された物を購入しました。
    タミヤのポルシェシリーズは自分も集めていますので、何処か親近感みたいな物を感じています。

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому +1

      コメント有り難う御座います!私自身もノッキーさんの動画をいつもご覧に頂いって降ります。この仕様はキャスターにも影響されます。

  • @daviddubail-tyler7363
    @daviddubail-tyler7363 2 роки тому

    And thanks I’m going to try the steering DYI

  • @MauzyrockRC
    @MauzyrockRC 2 роки тому

    great video thank you!!

  • @thefinerthingsinlife5963
    @thefinerthingsinlife5963 Рік тому +3

    Move your front shocks to the upper position for better turn in 😊

  • @camrowdrone6497
    @camrowdrone6497 3 роки тому

    Will need to do this too mine 👍🏻

  • @johnnycoolness
    @johnnycoolness Рік тому

    Great ideas.

  • @Beastnappy
    @Beastnappy 3 роки тому

    Thanks 👍

  • @alexphelan3737
    @alexphelan3737 2 роки тому

    Best top secret release for TT-series

  • @thatactuallyruns4309
    @thatactuallyruns4309 3 роки тому

    Yeah totally right and it is a great mod for any rc on road or off ....

    • @thatactuallyruns4309
      @thatactuallyruns4309 3 роки тому

      I’m building the 1/10 Subaru Impreza 99 Monty Carlo as we speak and I’m to the part where the shocks are assembled . I absolutely could not believe what I was putting together ...I’ve never seen in all my 42 years “ new bright “ shocks on a Tamiya rc or any hobby grade for that matter . Am I crazy or are these things junk ? Won’t even lock together right witch leaves slop witch hinders drivinig witch risks a good curb or parked car collision ... sorry fail bullshit Tamiya wtf . ( I rebuilt em with traxxas parts ) are all TT-02 chassis come like this one ?

  • @ultimobancorc
    @ultimobancorc Рік тому

    Well done thanks

  • @victortakeda9338
    @victortakeda9338 2 роки тому +2

    Love the car. Also what dampeners are you running?

    • @simpleisthebest73
      @simpleisthebest73  2 роки тому +1

      Thank you! Those are Tamiya’s

    • @victortakeda9338
      @victortakeda9338 2 роки тому

      @@simpleisthebest73 Thanks, Anyway you can find the part number for those?

    • @simpleisthebest73
      @simpleisthebest73  2 роки тому +1

      @@victortakeda9338 these are bought more than 20 years ago… sorry..

    • @THEGHOSTMAKER1
      @THEGHOSTMAKER1 Рік тому

      How come you installed the dampers upside down?

  • @PopalongRC
    @PopalongRC 2 роки тому

    Good to know

  • @user-pj8hu4op6z
    @user-pj8hu4op6z 7 місяців тому

    These front links only hold the front arms firmly at certain angle.
    If the front arms lowered a bit, the clearance becomes larger and the links dont fix tightly anymore

  • @andrewmagro7703
    @andrewmagro7703 3 роки тому

    have new sub :-))

  • @moraesmarcobsb
    @moraesmarcobsb 3 роки тому

    Nice job....the original TT02 front suspension is too loose... the bottom arms are nice , but upper arms and knuckles joint.......

  • @tonylybarger9228
    @tonylybarger9228 Місяць тому

    What kind of tires are those?

  • @evanmehlhose6793
    @evanmehlhose6793 3 роки тому +1

    What are these called?

  • @danielboyce8804
    @danielboyce8804 5 місяців тому

    My TT02 is very solid without those links, no movement at all. And for the best steering use tt02 type s part number 54965

  • @culprit92
    @culprit92 Рік тому +1

    What is the part you've used to connect the turn buckle the top of the knuckle? The blue part.

    • @simpleisthebest73
      @simpleisthebest73  Рік тому

      It was some Chinese after market part that came with blue aluminum knuckles, but ball bearings weren't fit so I just ended up using O ring spacer which is same as that you use for TT02 kit

    • @culprit92
      @culprit92 Рік тому

      @@simpleisthebest73 trying to figure out what I can use to connect it to the knuckle without the having the part you have.

  • @RC4X4
    @RC4X4 2 роки тому

    Where did you get the blue pieces on the steering parts.

    • @simpleisthebest73
      @simpleisthebest73  2 роки тому

      It’s from aftermarket TT02 Steering knuckle arm set, but ball bearing didn’t fit so I just use the spacers

  • @Testandtunerc
    @Testandtunerc 3 роки тому

    What's with the upside down dampers. I've seen these a few times

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому

      I just copied some other drivers too. I think it help reduce oil leaks, and it look different! It’s cool to be look different lol

  • @Myaimskindagood
    @Myaimskindagood 2 роки тому +1

    Why are the shocks upside down? Is it better with handling at all?

    • @qtreven
      @qtreven 2 роки тому

      Lowerling cg but it has a oil leak problem.

  • @user-wh2eh9xj9w
    @user-wh2eh9xj9w 3 роки тому +1

    TA-02で、かなり前に、サードパーティーから、同じような効果のある商品が、発売されていましたよね。

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому

      コメントありがとうございます! そうかもしれませんね。。

  • @brentg2642
    @brentg2642 2 роки тому

    What did you use or what can I use for the friction balls In the suspension arms?

    • @simpleisthebest73
      @simpleisthebest73  2 роки тому +1

      It's just the normal one that come with the kit. I'm not sure if I answered your questions right.... sorry if that wasn't help..

    • @brentg2642
      @brentg2642 2 роки тому

      @@simpleisthebest73 also where did you get you tie rod that attaches to the bumper? I like your set up. I have the rcaidong steering upgrade but still some play from the friction balls in the arms

    • @simpleisthebest73
      @simpleisthebest73  2 роки тому

      @@brentg2642 those are just leftovers from other Tamiya RC kits or Tamiya Hop-up parts.

  • @cprwrap11
    @cprwrap11 2 роки тому

    Hi. What size wheel tire are you using?

    • @simpleisthebest73
      @simpleisthebest73  2 роки тому

      I’m sorry.. I don’t have the spec of the tires.. I believe they’re med narrow Chinese aftermarket parts

  • @TheMetalsoft09
    @TheMetalsoft09 3 роки тому +2

    Mounting the shock upside down actually hurts performance of the shock, just a FYI

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому

      Thanks for the advice. I will reverse it again if I ever get in any sort of race.. lol

    • @martinallenuk
      @martinallenuk 3 роки тому

      Its a toy mate.

    • @TheBod76
      @TheBod76 Рік тому

      Why would it hurt the performance?

    • @TheMetalsoft09
      @TheMetalsoft09 4 місяці тому

      @@TheBod76 Sprung weight vs. Unsprung weight.

  • @Syx696
    @Syx696 3 роки тому

    What is the size and length of the ball connector you used?

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому +1

      5mm ball connector/ 25mm, 15mm turn buckle end..

    • @Syx696
      @Syx696 3 роки тому

      Thank you for your help! One more question..as you were showing your steering adjustments above and underneath what size bolt nuts and screws did you you use to make it more solid?

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому +1

      @@Syx696 it's a tap screw from hardware store just found in my tool box, and nut is from DF02 hop up parts aluminum oil damper set. Just extra parts from it. You can find anything that fits. Whatever it works. Good luck friend! 😉

    • @Syx696
      @Syx696 3 роки тому

      Thanks again my friend!!

  • @AS-cd9qx
    @AS-cd9qx 2 роки тому

    😳💪👍

  • @h.cedric8157
    @h.cedric8157 2 роки тому

    This might not be applicable to my TT02 Type S...
    Unless i am wrong.

  • @2815Juan
    @2815Juan 2 роки тому

    Those stabilizers. Aren’t necessary at all. You should adjust the steering link heights. The slop the stabilizer stops first change performance.

  • @daviddubail-tyler7363
    @daviddubail-tyler7363 2 роки тому

    Why are you running with the shocks up side down

  • @charlesyoung8600
    @charlesyoung8600 3 роки тому

    What song is that

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому

      It's from Inshot app. Music: Shave musicians: Marco Lazovic

  • @testuav1221
    @testuav1221 9 місяців тому

    このタイヤとホイールはどこのものですか?

    • @simpleisthebest73
      @simpleisthebest73  9 місяців тому

      イベイーで買った物ですが、中国産だと思います。ご視聴有り難うございます🤗

  • @evanmehlhose6793
    @evanmehlhose6793 3 роки тому

    Do you have a link for the parts you used?

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому +1

      These are all just leftover parts from my other RC kits. Plastic spacer is from CVA damper parts, and I use long hollow screws or cut off screw head as turn buckle linkage, and just need some ball connectors.

    • @evanmehlhose6793
      @evanmehlhose6793 3 роки тому

      Whats the blue aluminum called that you have connected?

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому +1

      @@evanmehlhose6793 don't worry about that. That blue front upright spacer came with Chinese aftermarket aluminum front upright, but ball bearings didn't fit. So, I just only use spacer. You can just use plastic parts came with the kit.

    • @evanmehlhose6793
      @evanmehlhose6793 3 роки тому

      @@simpleisthebest73 Oh I see I’m just a sucker for that shiny aluminum haha is this the set to buy? Than just get some 5mm ball screws? www.ebay.com/itm/Tamiya-54556-FRP-Front-Damper-Stay-Set-TT02B/153991356664

    • @evanmehlhose6793
      @evanmehlhose6793 3 роки тому

      Thank you for your quick feedback what exactly did you do for mounting up the front?

  • @user-gv4vx7nc1w
    @user-gv4vx7nc1w 3 роки тому

    こんにちは!
    出来ればやり方を教えて欲しいです。

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому

      こんにちは。特にやり方と言っても。。ただ余ったタンバクル部品やCVAダンパに残ったスペーサーを組んだものなので。。すみません役に立ったなくって。。

    • @user-gv4vx7nc1w
      @user-gv4vx7nc1w 3 роки тому

      @@simpleisthebest73 ありがとうございます😄チャンネル登録しました。

    • @simpleisthebest73
      @simpleisthebest73  3 роки тому

      @@user-gv4vx7nc1w ありがとうございます😊

  • @yoshi_9885
    @yoshi_9885 3 місяці тому

    ダンパーが上下逆

  • @chrismooneyham5279
    @chrismooneyham5279 2 роки тому +1

    Learned nothing