Nice video. I bought a TT02R recently for £90 second hand and converted it to race spec. I’m amazed how good it is… I’m now only 2 laps behind the sponsored Xray touring car drivers at my local club, which is amazing given the price gap.
Nice build. I’m following your advice on the way your hooking up your steering . Someone else I know told me the same .I ordered titanium screws for my build . I use the stock TT02 lower plastic arms . Cheaper to break and it’ll give the rest of the aluminum parts some give as to not break them . I have most of your hop ups already except I use carbon fiber battery retainer,shock towers and front bumper support to-get rid of that really heavy chunk of plastic . Also titanium screw kit , titanium and aluminum nuts top shock screws . I have on order the carbon fiber steering top brace which crosses the tops of steering posts which you show here and the sand protector and the steering link rods you have . All on the hard plastic chassis . Yeah racing sells titanium shock pivot balls with longer threads the plastic arms that strip very easy even if you careful so I figure longer is better even if I have to drill deeper . I noticed on yours. the chassis side of the upper camber link has a lot of play in it . I shimmed mine up nice to almost no play . I Gotta shim my spur gear up soon looks like a millimeter play but may do half . 2 days ago I changed out the brushed motor for a Hobbywing 21.5 brushless system . Not crazy fast but it is faster ( maybe 22/24 mph ). Now it’s much quicker off the line and braking is so much smoother . I highly recommend it but it’s not cheap about $150 American . My goal is to Trying to keep weight low into the chassis and light and strong with aluminum and carbon fiber parts . ( if your racing with a transponder I located mine in a notched out area of the foam front bumper half way under the carbon fiber bumper support ) . My thought is if in a race that’s neck and neck whomever transponder is closest to the receiver wire Will register first . Most people put em back over the servo or something . Our tracks wire is ground level ( drive over it ) and my transponder is very close to the ground getting better reception to the race system .
@@RTLRC ah no worries! I’m currently building one just for speed runs with under car aero etc. The TRF420 arm conversion is truly excellent, but not cheap. Worth exploring though!
I have 7 TT02 I do know the performance, and dissatisfied.but some shiny body shells come with the kit are exclusive. Moreover, I spent a lot to mod these TT02 to type s grades
Very nice Love TT02 To fit your axle's in your rear you need from Yeah Racing: TT02-017 or from Tamiya 54477 You need some 38/39 mm metal dog bones to use with your TG10 wheel axles. But i don't think they are easy to find, maybe Ebay or Ali Express But you could get some 54394 metal universal shafts, as they also use a long axle. I use these on one of my TT02 to have a real wide stance I buy (mostly) my hop ups from RC Mart
Nice video. I bought a TT02R recently for £90 second hand and converted it to race spec. I’m amazed how good it is… I’m now only 2 laps behind the sponsored Xray touring car drivers at my local club, which is amazing given the price gap.
it's like racing a polished turd vs. something that's badass right out of the box
@@mhrcracing If your skill level only extends to opening boxes….
@@RTLRC Amen 🙂.
Nice build. I’m following your advice on the way your hooking up your steering . Someone else I know told me the same .I ordered titanium screws for my build .
I use the stock TT02 lower plastic arms . Cheaper to break and it’ll give the rest of the aluminum parts some give as to not break them . I have most of your hop ups already except I use carbon fiber battery retainer,shock towers and front bumper support to-get rid of that really heavy chunk of plastic . Also titanium screw kit , titanium and aluminum nuts top shock screws . I have on order the carbon fiber steering top brace which crosses the tops of steering posts which you show here and the sand protector and the steering link rods you have . All on the hard plastic chassis . Yeah racing sells titanium shock pivot balls with longer threads the plastic arms that strip very easy even if you careful so I figure longer is better even if I have to drill deeper .
I noticed on yours. the chassis side of the upper camber link has a lot of play in it . I shimmed mine up nice to almost no play . I Gotta shim my spur gear up soon looks like a millimeter play but may do half .
2 days ago I changed out the brushed motor for a Hobbywing 21.5 brushless system . Not crazy fast but it is faster ( maybe 22/24 mph ). Now it’s much quicker off the line and braking is so much smoother . I highly recommend it but it’s not cheap about $150 American . My goal is to Trying to keep weight low into the chassis and light and strong with aluminum and carbon fiber parts . ( if your racing with a transponder I located mine in a notched out area of the foam front bumper half way under the carbon fiber bumper support ) . My thought is if in a race that’s neck and neck whomever transponder is closest to the receiver wire Will register first . Most people put em back over the servo or something . Our tracks wire is ground level ( drive over it ) and my transponder is very close to the ground getting better reception to the race system .
@@ebandcamp wow, thanks for sharing and pleased to have helped, Ti is another level 😎
Do like a TT02 build. Have to say though; the aluminium arms aren’t something I’d go for. Type S or TRF420 arms are my preferred route.
@@archer8096 thanks for sharing, will def have a look into that 🙏
@@RTLRC ah no worries! I’m currently building one just for speed runs with under car aero etc. The TRF420 arm conversion is truly excellent, but not cheap. Worth exploring though!
Ich habe auch so ein blaues Monster😅 aber nur zum Anschauen im Regal😅zum Fahren taugt der 💩nicht
I have 7 TT02 I do know the performance, and dissatisfied.but some shiny body shells come with the kit are exclusive. Moreover, I spent a lot to mod these TT02 to type s grades
Great video. Where can i find the carbon fiber deck the steering bracket sits on?
I would like to hear what are the proper long wheel axles
Very nice Love TT02
To fit your axle's in your rear you need from Yeah Racing: TT02-017 or from Tamiya 54477
You need some 38/39 mm metal dog bones to use with your TG10 wheel axles. But i don't think they are easy to find, maybe Ebay or Ali Express
But you could get some 54394 metal universal shafts, as they also use a long axle. I use these on one of my TT02 to have a real wide stance
I buy (mostly) my hop ups from RC Mart
@@aviano72 Thank you so much for your response and advice. I will explore both options 🙏
Where did you get the carbon parts?
@@davidestate Hello, they are from an EBay seller, Racing Punk UK. 😎
i had gpm racing stuff for my hpi racing micro rs4 25 yerz ago
@@fourmula4812 GPM make quality Alu parts, have upgraded my BBX with them. Just seem harder to find brand of late.
@@RTLRC
Are those tyres wider than 26mm?
@@thomassalin949 yes, the rears are 32mm and come with kit 👍
Guten Tag wo bekomme Ich die Schrauben M 3 Hex Bolt 25 mm
Very nice tt02 you need to get a better motor
For sure, just deciding whether to go brushless… 😎
日本語で喋るように❗