It's funny because the ESC for 1/64 Scale are difficult to find in Two-Way. They cost too much money and shipping time is too long. Also, 9G Servos are cheaper than smaller 4.3G, and 2.1G. I prefer Metal-Geared Servos because you get spare parts out of the deal, too. This is a Great Video!
Thanks!.. I prefer using these smaller servo so I can use the spare gears on my future projects, yes I also wonder why 9g servo are cheaper than the smaller one?.
love the vid man! incredibly helpful for a project of mine, which should hopefully move along quite well now with its soon-to-be esc! Fun fact: the truck youre building is known as a Deuce and a Half, and it’s quite famous for its incredible capabilities plus the fact that they are almost un-killable 👍🏻
Nope, the i.c. is not powerful enough to run 130 size motor, it can run.. but once you put load on it, it will burn the board easily. I would suggest for you to get the cheap 20Amps micro ESC, that should be powerful enough to run even modified 130 motors.
Unfortunately di na po active yung seller sa Lazada, I found one sa Shoppee with the same model but the price is a bit higher, around 9K here is the link if interested, note I am not connected nor affiliated or whatsoever with the seller: shopee.ph/X79-Motherboard-LGA2011-Combo-with-E5-2620-CPU-4-Ch-16GB-(4X4GB)-DDR3-RAM-13-O5R7-i.275682531.6747670175?sp_atk=96b55be0-5b96-443c-9c0c-954bdbf0bf75
@@ArvinDomingo pero kuya arvin Kaya po kaya nang 3k motherboard yung xeon e5 2689 natatakot po kasi akong bilhin kasi baka hindi kayanin nung motherboard
@@kylerollon6990 Kaya naman nung tig-3K na motherboard as long as yung 2689 mo is LGA2011, but if I were you I would go for the motherboard na di ko ni-review at sa ni-review ko, kasi quad channel yung ram slots nun, yung tig-3K dual channel lang kahit 4 ang ram slots. Pero depende naman yan kung saan mo gagamitin yung board.
@@ArvinDomingo gagamitin ko po ito sa gaming and school work Hindi ko rin po gagamitin yung intel turbo boost Kaya po baka yung tig3k nalang bilhin ko thx sir Full support ako sa channel nyo sir
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Wow that is so simple!!!
Yes it's that simple! 😎👍
thats exactly what i was looking for thanks!
Awesome conversion! I’ll definitely be trying this.
Thanks for sharing!
It's funny because the ESC for 1/64 Scale are difficult to find in Two-Way. They cost too much money and shipping time is too long. Also, 9G Servos are cheaper than smaller 4.3G, and 2.1G. I prefer Metal-Geared Servos because you get spare parts out of the deal, too. This is a Great Video!
Thanks!.. I prefer using these smaller servo so I can use the spare gears on my future projects, yes I also wonder why 9g servo are cheaper than the smaller one?.
great video very useful in my current micro rc project, subscribed for sure!
love the vid man! incredibly helpful for a project of mine, which should hopefully move along quite well now with its soon-to-be esc!
Fun fact: the truck youre building is known as a Deuce and a Half, and it’s quite famous for its incredible capabilities plus the fact that they are almost un-killable 👍🏻
Sir can I use 2.2k ohm resistor?
petmalu sir vin rotor ng tamiya ba yan very nice sir
Ahahaha salamat Chef!, may kaunting part niya from tamiya mini-4wd 😎👍
I'm curious if this could run 130 motor (tamiya mini4wd sized) motors.
I'm planning to convert a mini4wd into an rc 😁😅
Nope, the i.c. is not powerful enough to run 130 size motor, it can run.. but once you put load on it, it will burn the board easily. I would suggest for you to get the cheap 20Amps micro ESC, that should be powerful enough to run even modified 130 motors.
what is the value of the resistor?
2.2K ohms
The pot is 5ohms? Or 5Kohms???
Sorry sir dito na ako nag comment
Question, meron po ba kayong link nung dating motherboard nyo na x79
Yung motherboard po na hindi nyo ni review
Unfortunately di na po active yung seller sa Lazada, I found one sa Shoppee with the same model but the price is a bit higher, around 9K here is the link if interested, note I am not connected nor affiliated or whatsoever with the seller: shopee.ph/X79-Motherboard-LGA2011-Combo-with-E5-2620-CPU-4-Ch-16GB-(4X4GB)-DDR3-RAM-13-O5R7-i.275682531.6747670175?sp_atk=96b55be0-5b96-443c-9c0c-954bdbf0bf75
@@ArvinDomingo pero kuya arvin
Kaya po kaya nang 3k motherboard yung xeon e5 2689 natatakot po kasi akong bilhin kasi baka hindi kayanin nung motherboard
@@kylerollon6990 Kaya naman nung tig-3K na motherboard as long as yung 2689 mo is LGA2011, but if I were you I would go for the motherboard na di ko ni-review at sa ni-review ko, kasi quad channel yung ram slots nun, yung tig-3K dual channel lang kahit 4 ang ram slots. Pero depende naman yan kung saan mo gagamitin yung board.
@@ArvinDomingo gagamitin ko po ito sa gaming and school work
Hindi ko rin po gagamitin yung intel turbo boost
Kaya po baka yung tig3k nalang bilhin ko thx sir
Full support ako sa channel nyo sir
@@kylerollon6990 Naku maraming salamat sa suporta! 😎👍
Test with big motor sir
You're likely to damage the MOSFET quite easily when you use motor such as the Mabuchi 130-size motor, such as those found in Tamiya Mini4WD kits.
I thinking of building a small boat for my aquarium, is this going to work for my small boat project?
How can I make esc
This is a bidirectional esc not very useful.
Hmmm.. well I have been using this esc to all my micro esc rc project 😊