Hey man loved the video, I followed your video to a T!I ended up installing mine the same exact way! Minus the ext speaker part I have one that I want to use behind the cubby hole next to the heater controls! Basically hiding it the same way just a different spot! Loved the all the Info you provided! Mr happy over and out!!
I'm going to be doing this with my 29 GTL. It has the side mount so I'll have to wire up a mic plug on the side of the CB. I'm probably going to use the top cubby for a switch panel. You did a great job on the install. Only thing I would do is run the power and ground to the battry or the positive stud in the under hood fuse panel if you are have any noise interference.
This is awesome! I've been thinking about mounting a cb in the same spot for when I go on offroad recoveries, thanks for the informative video! 10-4 buddy!
I actually didn't need to mount it because the mic hooks/hangs perfectly to the sunglasses cubby near the done lights in this generation of interior! Thanks for watching!
And I bet you get lots of engine noise both through the power wires and antenna. You always run the power wire to the battery. With the radio off it doesn’t draw power. The install itself looks great but I would have ran the power wires to the battery. Plus used some LMR 400 coax.
Hows it holding up in this location. Im taking the radio out of my other truck and possibly installing it in this same location in my 05. Clean install and even cleaner truck. Mine is the same color but a crew short 2500.
@@605LIFE Good to hear! I will most likely be installing mine there next week. Right now I have it double sided taped to the center console as a temporary fix for vacation. But in the down time of the trip I might be doing some cutting. I'll have the tools with me. The antenna is mounted between the bed and the cab. Great hidden spot and easily accessible.
Thanks for watching! It's a "QBest" brand from Amazon I got back in 2018, they apparently stopped making it, however, I found something similar here: www.amazon.com/dp/B09GXJ1L3H/ref=twister_B09MQ28NCX?_encoding=UTF8&psc=1
The radio is actually only bolted to the black plastic pocket trim/insert, which clips into the colored dash console piece from factory. My bad on not filming that, I'm an amateur over here. Thanks so much for watching!
Great video. Im about to do something similar to my 2000 tahoe. I'll try and make a similar video if i don't destroy everything. Lol. Im subscribed. 404/Roadblock/KD2MOT wavu g at you from NW, GA! 73
Probably the cleanest cb install I've seen. Looks factory! I strive to have this clean of an install
Appreciate the comment! Thanks for watching!
Very clean install that shows your attention to detail and planning.
I appreciate it! Thank you for watching!
Wow what a nice install!!
I appreciate the comment!! Thank you for watching!
Hey man loved the video, I followed your video to a T!I ended up installing mine the same exact way! Minus the ext speaker part I have one that I want to use behind the cubby hole next to the heater controls! Basically hiding it the same way just a different spot! Loved the all the Info you provided! Mr happy over and out!!
Right on!! Thanks for the comment, I loved hearing this since there aren't that many similar CB videos on UA-cam these days! Thanks for watching!
I'm going to be doing this with my 29 GTL. It has the side mount so I'll have to wire up a mic plug on the side of the CB. I'm probably going to use the top cubby for a switch panel. You did a great job on the install. Only thing I would do is run the power and ground to the battry or the positive stud in the under hood fuse panel if you are have any noise interference.
That's good to know, I'll keep this in mind! Thanks for watching and commenting!
This is awesome! I've been thinking about mounting a cb in the same spot for when I go on offroad recoveries, thanks for the informative video! 10-4 buddy!
Thanks for watching! Appreciate you being here!
@@605LIFE course man! Awesome videos of your lly, love mine even though it's a slight pain in my ass lol.
@@Timfield.42 Haha keep on truckin' brother!
@@605LIFE you to! Keep up the awesome content!
Awesome installation man!
Thanks for your support! Lot of time went into this one!
awesome vid
Thanks for watching!
10-4! enjoyed the install. Do u have the dimensions of your radio. Want to install a different radio. Not sure if it will fit.
Thank you for watching until the end!! Dimensions are 7-1/4 x 2-1/4 x 8-5/8. Appreciate the comment!
Nice install
Much appreciated! Thanks for watching!
GREAT VIDEO THANKS
Where did you mount your mic holder? Clean instal man. Thanks for the motivation.
I actually didn't need to mount it because the mic hooks/hangs perfectly to the sunglasses cubby near the done lights in this generation of interior! Thanks for watching!
And I bet you get lots of engine noise both through the power wires and antenna. You always run the power wire to the battery. With the radio off it doesn’t draw power. The install itself looks great but I would have ran the power wires to the battery. Plus used some LMR 400 coax.
Thanks for the input, I'll keep this in mind for next time! Thanks for watching!
Awesome vid thx! 😎
Thanks for watching!!
@@605LIFE made it simple and easy to watch 💯, any recommendations for Jeep gladiator? Id like an all in one with a PA aswell
10-4
You're the best!
could have tighten the nut and held the bolt from moving at 7:35 besides that good job
Hows it holding up in this location. Im taking the radio out of my other truck and possibly installing it in this same location in my 05. Clean install and even cleaner truck. Mine is the same color but a crew short 2500.
Great! No issues at all, it fits nice and snug. Thanks for watching!
@@605LIFE Good to hear! I will most likely be installing mine there next week. Right now I have it double sided taped to the center console as a temporary fix for vacation. But in the down time of the trip I might be doing some cutting. I'll have the tools with me. The antenna is mounted between the bed and the cab. Great hidden spot and easily accessible.
Almost 1000 10-4
Whats the tps system you use?
Thanks for watching! It's a "QBest" brand from Amazon I got back in 2018, they apparently stopped making it, however, I found something similar here: www.amazon.com/dp/B09GXJ1L3H/ref=twister_B09MQ28NCX?_encoding=UTF8&psc=1
Watched the entire video to see you mount the cb radio step by step and you skipped bolting or screwing it into the dash!!
The radio is actually only bolted to the black plastic pocket trim/insert, which clips into the colored dash console piece from factory. My bad on not filming that, I'm an amateur over here. Thanks so much for watching!
I stop using cb radios back in 96. To much trash on them and no useful information.
Except they are perfect for emergencies, especially where there is no cell service. Thanks for watching!
Great video. Im about to do something similar to my 2000 tahoe. I'll try and make a similar video if i don't destroy everything. Lol. Im subscribed.
404/Roadblock/KD2MOT wavu g at you from NW, GA!
73
10-4
You're awesome! Thanks for watching!