Ford P246B:00-2F Vehicle Conditions incorrect For Regeneration P246C:00-2F Particulate Filter

Поділитися
Вставка
  • Опубліковано 15 лип 2024
  • P244C:00-6D exhaust temperature too low for particulate filter regeneration
    P246C:00-2F Particulate Filter Restricion Forced Power Limit
    P2463:00-AF DPF Soot Accumulation
    blocked DPF cleaning and vaporizer replacement
    my affiliate links..
    Kingbolen Diagnostic tools
    kingbolentool.com/?ref=iq39r3l2
    Auxito
    www.auxito.com/Cl8Qg2KdGMxVNq
    Carpuride
    carpuride.com/?ref=yiwxkdae
    one Car Stereo
    onecarstereo.com/?ref=TmZ0gzY...
    Diagnostic tool used is Launch UK Euro Tab 3 from www.launchtech.co.uk
  • Авто та транспорт

КОМЕНТАРІ • 42

  • @Nick-bp7jf
    @Nick-bp7jf 9 днів тому +8

    You must get tremendous satisfaction in successfully diagnosing and completing a repair where many other so called professionals have failed. You have earned your success.

  • @RogerM88
    @RogerM88 9 днів тому +5

    Jimmy once again for the rescue. Great job.

  • @TidyTransport
    @TidyTransport 9 днів тому +4

    Kind expected 200 Mbars and a blocked vaporiz
    er. Typical ford 2.0 TDCI engine faults.
    My mondeo 2013 had the same. Dinages ford dealership was stumped when I suggested it was a blocked fuel Vaporizer for the DPF. But they checked it, replaced and it worked flawlessly.
    Even the principle technician said he'd never heard of this fault/ Occurrence before. I said 'maybe you should check out UA-cam for O'Rileys Autos various DPF videos.

  • @grahamphillips3099
    @grahamphillips3099 9 днів тому +8

    your vids have pretty much convinced me to go petrol next time! keep up the great work

    • @thinfourth
      @thinfourth 9 днів тому +1

      I'm thinking electric

    • @leroyjohnson4973
      @leroyjohnson4973 9 днів тому +1

      Me 2!! ​@@thinfourth

    • @MattyEngland
      @MattyEngland 9 днів тому +2

      ​@@thinfourth lol, if you think these things are complicated, wait until you see the inside of an EV invertor 😂 1000s of components and the Failure of any one of them and your EV is dead in the water.

    • @chucky2316
      @chucky2316 9 днів тому +3

      As a mondeo mk4 owner I understand these now with Jimmy's help, next car will be a suzuki jimny for me super simple and does its job

    • @hughmarcus1
      @hughmarcus1 9 днів тому

      @@thinfourthless problems but no vehicle is problem free.

  • @jonnoble4486
    @jonnoble4486 9 днів тому +2

    The king is back well done Jimmy 👍👍👍

  • @jseemo9468
    @jseemo9468 9 днів тому +1

    I don't understand how shops get it so wrong when a 2 second Google search brings up so much information about the fixes for these vehicles lol

  • @davesmith5914
    @davesmith5914 9 днів тому +2

    As always Jimmy you're a legend 😊 thanks for sharing your knowledge 👍

  • @tomsurrey2252
    @tomsurrey2252 9 днів тому +3

    Another one bites the dust!!!!

  • @shaunblakemore7150
    @shaunblakemore7150 9 днів тому +2

    Great job Jimmy 👍

  • @JoseSilveira-newhandleforYT
    @JoseSilveira-newhandleforYT 9 днів тому

    Another great job, Jimmy!

  • @stainlesssteve25
    @stainlesssteve25 9 днів тому +1

    Great video. Thank you

  • @tidysampler585
    @tidysampler585 8 днів тому +1

    What I don’t understand, is why do garages insist on static regens?
    A method like this by pumping in the DPF cleaning fluid, is the most effective solution. And it’s easy 👍

    • @user-ub8gr9oz6y
      @user-ub8gr9oz6y 4 дні тому

      A static regeneration is easy money for them,

  • @thindo
    @thindo 9 днів тому +1

    Moved to a new location... No more fighting the lorries 😂😂😂

  • @simonbailey2151
    @simonbailey2151 9 днів тому +1

    The DPF Don!

  • @chucky2316
    @chucky2316 9 днів тому +2

    Fords eat these vapourisers

  • @BH-tp3pm
    @BH-tp3pm 8 днів тому

    Just out of interest, would you be able to do a demo of a dpf self regen after you have fixed a fault. Vs one with your clean?
    Be interested to see how the car responds naturally to a repair, looking at the live data etc

  • @mikeymike3634
    @mikeymike3634 8 днів тому

    Just a quick question Jimmy. Do you ever check the condition or service history of cam belts (if fitted) before you do a DPF clean and who would be liable if the belt did fail? I know that when I was MOT testing I refused to test several diesels because of low engine oil levels or belt condition.

  • @kevinrobertson2037
    @kevinrobertson2037 9 днів тому +1

    Where did you find your hand pressure pump ? Iam looking for one

  • @calutuu
    @calutuu 9 днів тому

    Hi, very good video. How much cost this vaporizer?

  • @Phantom-mk4kp
    @Phantom-mk4kp 9 днів тому +2

    Jimmy, asking for a recommendation. My daughter wants to buy a 2016/18 ish van to convert into a weekend camper. Max size Peugeot Expert. What would you recommend, with regard to engine reliability. What would you choose. All welcome to comment.

    • @miguelcalzadilla5757
      @miguelcalzadilla5757 9 днів тому +3

      Anyone without adblue

    • @chrisnewell-7758
      @chrisnewell-7758 9 днів тому

      I have bought a 2014 transit custom mid roof 2.2. I paid our mobile mechanic 40 to scan and give any advice. It was on 121k, bit of low vibration sometimes, he says its the dmf, but use it till it gets worse. No faults found on scan, 76% soot in dpf. Parts widely available and usually for reasonable money.

    • @chrisnewell-7758
      @chrisnewell-7758 9 днів тому +1

      I have also bought the Launch uk cleaning kit, just short of a scan tool or laptop with Forscan. Our family has some experience with the vaporizer... when we didn't know, my daughter had oil dilution etc etc etc, and had it done at an independent garage with ford equipment... my youngest son bought an Ebay vaporizer and I got the old one out with impact wrench and extension. No problem since.

  • @Mr4fksake
    @Mr4fksake 9 днів тому +4

    This bullshit on cars these days really are no good for the enviroment, , just look at the shit coming out of the back end with all those chemicals, soot and all sorts ! ?? 🤔😬😷

    • @hughmarcus1
      @hughmarcus1 9 днів тому

      A DPF is a form of smoke & mirrors to address urban air pollution. It collects soot in town but burns it off once you’re out in the countryside 😬

    • @Mr4fksake
      @Mr4fksake 8 днів тому

      @@hughmarcus1 I know that, but when it all goes tits up then you need to go through all this rigmarole to cure the blockages which is usually done in an urban area thus defeating the object, this plus the fact that air does tend to move about so air in urbanisation moves to the countryside and the countryside air moves to towns etc plus the fact that not all vehicles travel out of many towns, so like I said "a load of unnecessary bullshit of a system" 👎🤬🤬

  • @danielwarren6845
    @danielwarren6845 7 днів тому +1

    STOP resetting dpf values. It’s completely unnecessary and causing issues you don’t realise. Replace the vaporiser, carry out a static regen (so the values remain accurate) and send the customer on their way. You have absolutely no need to reset dpf values.
    By resetting them, you are not only resetting the soot values but also the ash values. From now on, all ash in the dpf will be considered soot. The vehicle will regenerate much longer and more frequent than necessary as it can not regenerate ash.
    Repair the fault. Carry out a regen. Done! That’s it.

    • @ORileysAutos
      @ORileysAutos  7 днів тому

      Sorry ill choose to avoid your advice. Static regeneration especially on a +200% blocked DPF will likely cause damage to the DPF itself or the car. Resetting the values the car will learn again very shortly where it's at

    • @danielwarren6845
      @danielwarren6845 7 днів тому +1

      @@ORileysAutos you’re welcome to ignore/take any advice you like, but I’d suggest believing that you know it all and there is no one out there that could teach you something new is perhaps not the best attitude. As I explained, resetting the values not only resets the soot calculations. It also resets the ash calculation. This can not be relearned. You’ve told the vehicle a new dpf has been fitted with ZERO ash in it. It only has a pressure sensor, so has absolutely no way of determining how much pressure is caused by soot and how much is ash. Regenerating a dpf over 200% is perfectly fine. Ford have a limit of 300% on most older vehicles and newer vehicles such as the connect with the 1.5litre can be regenerated perfectly safely with no limit whatsoever

  • @1954307
    @1954307 9 днів тому +1

    nice job jimmy

  • @truckermal
    @truckermal 6 годин тому

    He must be a Cavan man Jimmy...😂😂

  • @cornishcat11
    @cornishcat11 9 днів тому +2

    i would never do a forced regen ever