Thank you Gary for all you explain! And Thank XP for finally making it Mac iOS compatible. I’ll wait a while to update to 1.0 to take in the feedback from version 1.0 users. I hope they addressed the severe down averaging of a good target - higher conductor VDI when near iron. Of course with the new release the XP site must be overloaded as well, being a retired I.T. tech I expect that. I’m brand new, less than a week into to the D2 (And XP) working carefully over my test plot to get acclimated. Having experience with most flagship detectors since 1986 I appreciate the adjustability the Deus 2 offers. The Deus 2 ergonomics for me at 66 yrs old are unbeatable.
Добрый день ,у меня такая же история ,не видит наушники выдает ошибку ,что только не делал и кабель менял брал другой по мимо штатного ничего не получается с WS6 ,связался с разработчиками пишут как делать ,все это делал ничего не помогло
When can we expect the server to work propperly? At the moment it's almost impossible to create an account, and i had no luck loggin in or resetting password. I tried validating my account, but i suspect it haven't been verified because of server problems.
I solved my problem by creating a new account, using the exact same information as i provided last time. This time i got a positive validation message, but for some reason in french. My guess is server issues caused problems with account creation the first time i tried doing so.
The update site kept going down (the page where you sign into your account). The instruction page stayed up fine, just the actual update page kept timing out. I finally got the Remote to update, then the WS6 was very finicky. I had the proper cables, and they were seated properly on a fairly new W11 machine. The WS6 update failed several times, and the screen on the WS6 would not turn off while it said "UPDATING", using the power off sequence did nothing. I was thinking I was going to have to let the battery run out. It finally did connect and update to V1.0 thankfully. I used Edge Chromium under Windows 11 with all updates applied! You have to make sure in Edge Chromium settings under "Cookies and Site Permissions" that "USB Devices" is NOT BLOCKED. I had it blocked as a security measure, but had turned it off before the update process. I also made sure to disable my Ad blocker extension (Ublock Origin). It might help to have a U.S. based server, or use AWS to mitigate these timeout/crashing issues. It may become a non-issue in a week or two after everyone finally gets updated, but could return when trying to apply the V1.01 firmware update! Thanks for all the hard work getting the update to us!
It's worth noting that the USB cable that is part of the 3-way cable you get with the unit will not work to recognize the WS6. I believe this is a charging cable only. You must use the single USB cable.
Hello Gary, I had a little difficulty in updating my WS6, but did get it updated. After that, I had to pair my WS6 up to the remote. Is this normal? Once I did that everything works great. The only other thing I noticed was when I turned my remote on, my WS6 automatically came on without me choosing that option on my remote. I tried for the first time using my external speaker on my remote but the WS6 was still giving me audio. Is this normal?
I have a mac. it will not recognize the remote when i plug in the cables. I go through the steps as shown but when I get to the white box, it says No compatible device found. any ideas?
As the headphones no longer work (despite updating and re-pairing etc), can I go back to the original program? And what was it's name please? I was daft enough to not write things down and assume all this stuff would work!
Done all that, not easy. Updated the headphones, but now they won't pair. It keeps telling me to update them again. Tried again. Tried re-pairing, nothing. Now I can't go detecting.
The XP website will not allow me to reset my password or create a new account it’s been more than 30 hours since the release of v1 I have received 6+ emails from XP and they still can’t get website to work.
Just a quick one. Can I buy my deus2, with the updates already installed. I’m thinking of buying the 2, but without the faffing around, also I haven’t got access to a pc. Cheers gary
Following the instructions, if we plug in the controller, we naturally plug the other end into the computer. Totally normal thing to do. Follow all the prompts and near the end of the instructions it NOW says to plug the USB into the computer and we also start getting the error about USB issues. Unplugging and re-plugging the USB doesn't fix it. You have to shut off the controller, start the sequence again with the wire attached to the controller, but NOT the computer until it actually tells you to. Then it goes as it should. It says absolutely nothing in the instructions about not plugging the USB into the computer in the beginning. That's how it worked when I did the update in Chrome on a PC. Hope this helps someone stuck in that loop.
@@goldmanjace Thanks for your thoughts, perhaps if you have problems you can be contacted. I'm pretty sure XP won't use your personal details, people were commenting about this on Facebook Twitter, etc where they have surrendered their personal details, no matter how "below the radar" they think they are being.
Dont forget to write your personal saved programs down on paper before you up date i didn't do it on .71 it wipes old settings lucky i could remember my settings
I have found that you will also need to update the wireless headphones. Here is the problem....the charging cord for the headphone is not data capable. I had to get a USB A to USB B cable that had the ability to carry not only power but data as well. My computer would not allow the headphones to connect to the Deus website so I had to find a cable that would allow that. Once I had that cable, connection and updating was a breeze. YMMV of course.
@@xpmetaldetector I've done exactly what's in the video and got exactly the same usb issues,worst part is I pressed update and now my console is in a limbo it doesn't update or let me switch off or cancel the update to restart 😅
Evidently the "Subscribe" button is the create account button guys....maybe....now I'm sitting on "Your account has not been validated" but have not received any E-Mails from XP to 'confirm' my account sooooo....
@@meinereiner8137 Finally got the verification E-Mail and then finally after numerous retries was able to get logged in. But come on guys, Subscribe does not mean "Create account"...
@@TheVisjerr What were you unable to do exactly? I tried multiple networks, with/without VPN, mobile data. And yet i cannot logon or reset my password for any of my accounts :/ Tried contacting support, but haven't heard anything from them.
@@Temmie321 I'm not an IT specialist, I just connected the cable from my router to the router of the Internet provider. Try clearing your browser cookies and turning off your firewall.
Thank you XP for the easy to follow, dummy proof, step by step guide. It took me only 5 minutes to succesfully update my remote and my headphones.
Thank you Gary for all you explain! And Thank XP for finally making it Mac iOS compatible. I’ll wait a while to update to 1.0 to take in the feedback from version 1.0 users. I hope they addressed the severe down averaging of a good target - higher conductor VDI when near iron. Of course with the new release the XP site must be overloaded as well, being a retired I.T. tech I expect that. I’m brand new, less than a week into to the D2 (And XP) working carefully over my test plot to get acclimated. Having experience with most flagship detectors since 1986 I appreciate the adjustability the Deus 2 offers. The Deus 2 ergonomics for me at 66 yrs old are unbeatable.
Not work!!! Your website cant see my WS6, cant connect. I was try few webbrowsers and nothing :(
Did you click the WS6 tab at the top and use a single data cable?
Добрый день ,у меня такая же история ,не видит наушники выдает ошибку ,что только не делал и кабель менял брал другой по мимо штатного ничего не получается с WS6 ,связался с разработчиками пишут как делать ,все это делал ничего не помогло
Thank you Gary for sharing !! 🎉😊
When can we expect the server to work propperly? At the moment it's almost impossible to create an account, and i had no luck loggin in or resetting password. I tried validating my account, but i suspect it haven't been verified because of server problems.
I solved my problem by creating a new account, using the exact same information as i provided last time. This time i got a positive validation message, but for some reason in french.
My guess is server issues caused problems with account creation the first time i tried doing so.
Hello Gary thank you for explications but I wait a moment to the instalation the Version 1.0
Yes good idea because the server may be overloaded.
The update site kept going down (the page where you sign into your account). The instruction page stayed up fine, just the actual update page kept timing out. I finally got the Remote to update, then the WS6 was very finicky. I had the proper cables, and they were seated properly on a fairly new W11 machine. The WS6 update failed several times, and the screen on the WS6 would not turn off while it said "UPDATING", using the power off sequence did nothing. I was thinking I was going to have to let the battery run out. It finally did connect and update to V1.0 thankfully. I used Edge Chromium under Windows 11 with all updates applied! You have to make sure in Edge Chromium settings under "Cookies and Site Permissions" that "USB Devices" is NOT BLOCKED. I had it blocked as a security measure, but had turned it off before the update process. I also made sure to disable my Ad blocker extension (Ublock Origin). It might help to have a U.S. based server, or use AWS to mitigate these timeout/crashing issues. It may become a non-issue in a week or two after everyone finally gets updated, but could return when trying to apply the V1.01 firmware update! Thanks for all the hard work getting the update to us!
Thanks for your feedback Nick.
I can only guess the server was having problems with all the updates at the same time.
🤠👍🇧🇷 V 1.0 performed successfully. Saturday will be the day to go to the field with the news. Cordial Brazilian greetings.
Good luck sir 🤝
@@The-skillschool Thank you friend!
Does a coil need to be active when performing the update? And if so, do I need to repeat the update process with my second coil?
Thanks.
It's worth noting that the USB cable that is part of the 3-way cable you get with the unit will not work to recognize the WS6. I believe this is a charging cable only. You must use the single USB cable.
now we need a 6" DD coil
Or a 6x8, like the old explorer..
Hello Gary, I had a little difficulty in updating my WS6, but did get it updated. After that, I had to pair my WS6 up to the remote. Is this normal? Once I did that everything works great. The only other thing I noticed was when I turned my remote on, my WS6 automatically came on without me choosing that option on my remote. I tried for the first time using my external speaker on my remote but the WS6 was still giving me audio. Is this normal?
You need to turn the volumes down on the RC after the update.
@@The-skillschool Thanks Gary!
I have a mac. it will not recognize the remote when i plug in the cables. I go through the steps as shown but when I get to the white box, it says No compatible device found. any ideas?
As the headphones no longer work (despite updating and re-pairing etc), can I go back to the original program? And what was it's name please? I was daft enough to not write things down and assume all this stuff would work!
Done all that, not easy. Updated the headphones, but now they won't pair. It keeps telling me to update them again. Tried again. Tried re-pairing, nothing. Now I can't go detecting.
Thanks Gary! Awesome video!
You are welcome Chris
The XP website will not allow me to reset my password or create a new account it’s been more than 30 hours since the release of v1 I have received 6+ emails from XP and they still can’t get website to work.
Language options are gone with this new update.
Just a quick one. Can I buy my deus2, with the updates already installed. I’m thinking of buying the 2, but without the faffing around, also I haven’t got access to a pc. Cheers gary
Following the instructions, if we plug in the controller, we naturally plug the other end into the computer. Totally normal thing to do. Follow all the prompts and near the end of the instructions it NOW says to plug the USB into the computer and we also start getting the error about USB issues. Unplugging and re-plugging the USB doesn't fix it. You have to shut off the controller, start the sequence again with the wire attached to the controller, but NOT the computer until it actually tells you to. Then it goes as it should. It says absolutely nothing in the instructions about not plugging the USB into the computer in the beginning. That's how it worked when I did the update in Chrome on a PC. Hope this helps someone stuck in that loop.
Gary, since the beginning of deus 1, it was so easy to update, now I’m scratching my head, lol
Well the Americas version is still .71. I can't connect to the French site with my unit.... Is there a place I can updated to 1.0 in America?
Definitely not an easy update. Nothing is working like in this video. It won’t even let me create an account
Please be patient check your spam e mail for account confirmation.
@@The-skillschool it finally worked. I guess the site was probably just flooded the first time i tried it. Thanks.
Same here and I dont fancy giving my personal information to create an account. Why do they need my name and phone number??
@@goldmanjace Thanks for your thoughts, perhaps if you have problems you can be contacted.
I'm pretty sure XP won't use your personal details, people were commenting about this on Facebook Twitter, etc where they have surrendered their personal details, no matter how "below the radar" they think they are being.
@@lancemcilwainoutcastmetald5398 I think you are right Lance.
Can I pair apple AIRPODS pro instead of the headphones to the u it?
Dont forget to write your personal saved programs down on paper before you up date i didn't do it on .71 it wipes old settings lucky i could remember my settings
Yes and don't forget to turn your volumes down after the update.
I have found that you will also need to update the wireless headphones. Here is the problem....the charging cord for the headphone is not data capable. I had to get a USB A to USB B cable that had the ability to carry not only power but data as well. My computer would not allow the headphones to connect to the Deus website so I had to find a cable that would allow that. Once I had that cable, connection and updating was a breeze. YMMV of course.
That why xp supplies you with the extra cable in the box. And it is explained in the movie.
should have added that the headphones need to be paired again and show how. Plus mine dont shut off automatically anymore. Is this a bug?
Also having the same issue, any resolutions please guys?
Trying to update the deus 2, but windows says device is malfunctioning, and will not recognize.... HELP!!
You need to follow the instructions to the letter and use the correct leads
@@xpmetaldetector I've done exactly what's in the video and got exactly the same usb issues,worst part is I pressed update and now my console is in a limbo it doesn't update or let me switch off or cancel the update to restart 😅
Is there anyone anywhere I can talk to? This is absolutely ridiculous!!!!
Merci gary 🫡
У меня проблема с наушниками после обновления они зависли и надпись FREQ.SHIFT ЧТО ДЕЛАТЬ ??
Имей уважения, задай вопрос через переводчек, если ты нехочешь заморачиваться то Гэри тоже.
@@stop9534 имей уважение не пиши мне больше))
Evidently the "Subscribe" button is the create account button guys....maybe....now I'm sitting on "Your account has not been validated" but have not received any E-Mails from XP to 'confirm' my account sooooo....
I can subscribe that. Same here, try it with 2 Email Accounts. No activation mail for hours.
@@meinereiner8137 Finally got the verification E-Mail and then finally after numerous retries was able to get logged in. But come on guys, Subscribe does not mean "Create account"...
@@ChrisEpler Since half an hour, i also got Ver. 1.0. What a nice Update 🙂
@@meinereiner8137 Same horrible large numeric font though.
@@ChrisEpler jepp but fulltones is finally working.. And Lots of other nice Features
XP Website won't let me create account - NOT GOOD
I'm experiencing same problems. Did manage to create an account, but it won't let me log in or reset password.
Me too!
problem solved, my connection was blocked by the firewall on the router, not in the computer.
@@TheVisjerr What were you unable to do exactly? I tried multiple networks, with/without VPN, mobile data. And yet i cannot logon or reset my password for any of my accounts :/
Tried contacting support, but haven't heard anything from them.
@@Temmie321 I'm not an IT specialist, I just connected the cable from my router to the router of the Internet provider. Try clearing your browser cookies and turning off your firewall.
mine shows version 2??
did this update version enable the "tracking" option on WS6 headphones
Yes
@@xpmetaldetector Thanks !!!
Why I take this mess" your device is unsupported?
bad cable or controller, and now it is frozen on update, can't even shut if off.....
Hey, why is commenting disabled on the newest video? Not cool
They are not
@@xpmetaldetector We'll I guess you either changed it or UA-cam fixed it. Thanks or sorry accordingly!
damn I have either a bad cable or controller..... anyone else? "The last USB device you connected malfunctioned.....
So basically zero phone support.....
I’m already disliking this thing…AT gold is so much more user friendly
Καλημέρα .
Most weirder way to update is hard to imagine! Dislike to xp!!
Bull Sh...t detector 👍
👏👍🫡