DIY: Steering Lock for Drifting
Вставка
- Опубліковано 26 гру 2024
- Do it yourself tutorial by Sled Builders / BMW E36
/ norbefilms
TIPS:
▪ DON'T FORGET TO WEAR SAFETY GLASSES AND GLOVES!
▪ Use rims with low offset, cheapest option is to use E34 steelies (15x6.5 ET20)
▪ You can make even more steering angle by cutting more than 1cm off, and making less than 11cm gap between hub joints. If so, we recommend using spacers for wheels to make offset about 0 or -15 or lower.
▪ All questions will be answered in the comments below!
Music: LazerHawk - Pedal To The Metal
Its so cool hearing you guys speak english after watching your videos for years
Trevor Phillips yes it is and the only language i know
+Brandon Clarke ik 3
I think more than 1cm must be cut from the knuckle. Others have cut almost 2cm off and give better angle.
Thanks for the ackermann correction technique 👍
For others attempting this, before welding remove your wheel bearing and preheat the hub. After welding you must not let it cool too fast otherwise it is prone to crack due to the material the hub is made of. (Different thermal expansion coefficient compared to the weld material itself 👍)
This is true. 1cm is not enough. I have done exactly 1cm with good results. But 2cm is better. Dont go more than that if you don't know what you doing
*Says don't forget gloves and safety glasses in the video description.*
*Does all the job without safety gear* you guys are awesome! Great video!
Kaip jau kažkas minėjo. Kalbėkit lietuviškai. Titrai padės visada. O blogiausiu atveju vertimą balsu padaryti žmogaus kuris nepriekaištingai kalba angliškai
bet nepaisant to. Tikrai laukiam daugiau tokių video ;)
I bet the German Tüv would love to see that :D :D
Tikrai geriau būtų lietuviškai ir angliški titrai. Ar bent jau apvirksčiai :)
my favorite part was 3:10
This was very educating! And thank's for the english! Cheers from Latvia!
Kalbekit lietuviskai ir dekit subtitles, kaip ir daret pries tai.
Siaip tai super video.
love these old videos. they bomb af.
LOL safety equipment is clearly not a thing you guys care about.
awesome video dudes, love this shit.
this is 100% safe
i agree
Not bad, make more DIY's for e36
The difference is very visual! Amazing build :)
"Don't forget to wear safety glasses and glovers"...
>Wears none of it
Usually I see guys put some serious heat onto the spindle spot your going to weld. Make it cherry red then weld it . Cool it slowly with a torch. That is how you weld cast steel or those could break. Thanks for showing your Jig setup.
are this guys fingers immune to fire or something? great video btw
also whats the song at the end? around 7:50
Thanks and yes, Ignas is crazy! Song at the end: Crxsh - Under God
***** thanks alot!
when u do manual labor for a while u get thick skin on ur hands thats why u dont feel the sparks from anglegridner etc
joey BOYER wtf im not complaining, i am a welder at a shipyard so im acustomed to welding slag in my neck etc
Sorry I quoted you in that
I ment everybody lol
I see people already have expressed their concerns about safety.. lol
In all seriousness though, I cut myself in my thumb because the angle grinder grip up and drove itself right up my thumb so I had to go to hospital to have my hand fixed as some joints was cut off. Im happy I was wearing gloves, If I wouldnt, id have a permanently broken thumb.
Always use eye protection because the plate can break and throw out projectiles everywhere, perphaps damage your eye if youre unfortunate.
So please, get some nice eye protection and some tough gloves when doing this kinda stuff
Otherwise, Good video!
No gloves with rotative tools !! But i agree for the eye protections!
Oh, and props for making the video in English this time around :) Keep up the good work, guys!!!
Great video friend, but in need of more light. (The American accent when he said "God Dammit" was hilarious btw)
yeah LOL goddamit hahah
Kaip tik šito ieškojau, manau pavyks pasidaryt, ačiū!
Realiai galetu but ir lietuviski titrai bet suejo ir taip lauksim nauju video!
thanks! i think so many people have been waiting for something like this.!
Nice video guys!!!
Props to have sorted out your english for everyone ^^.
I am not an english native speaker also.
ty for english. also subs' are ok.
With love from Latvia. :D
Taip netyčia užklydau čia, tik užteko 2s jūsų raišlios anglu kalbos, kad pažint sava tautybe. :D bet šaunuoliai vyrai, patiko, suskraibinu.
Nice job man, I do S chassis knuckles and its cool to watch others ideas and process
wow precision engineering to the max, love it!
good video guys i tryed this on my e36 and it worked really good thanks
Madd Morris doesn't E36 have a ton of aftermarket support that you can just buy new ones?
Maladec, dar kaip diff uzvirint galetumet tutoriala padaryt :)
So with a shorter steering arm length, you can turn the wheel more??
great video! This is almost same lvl stuff than fast n loud they are showing in television :D great performer
Really very cool i want this in my car
Have fun guys! Great video!
damn it! :D prajuokino :) geras tutorial zmonems su mazu biudzetu norintiems statyti skersa :)
Awesome video! Keep it up!
Awesome! Have been wondering about this for a time now....
Great! I was looking forward to this video, Norbe! :) Greetings to you and your bro!
Best video out ther for cut knuckles
Norbe u and ur bro awesome! like ur videos too much! Filming moree please
Respect from russia!
Maladiec,manau reiktu daugiau tokiu klipuku,nes nemazai kas iesko info ir ne visada lengva jos rast apie ivairius mod'us :)
Badass! Did a drift angle on my Starion.
Would this decrease your turning radius at low speeds too? Or would the car just plow?
What is the cramp like tool at 2:21 & what is its purpose? Thanks.
Kokius suvirinimo aparatus naudojate?
Kavinsky in the soundtrack, awesome!
dude this is sick!
how much angle did he earn?
whats better for more angle having a tie rod cutting and stock control arms or tie rod giving a lot of toe out and extending lower control arms or they are the same ?
Vintage norbe, nice
Great vid guys :) Best of luck.. and lock as well :D
Great video! Thanks for sharing
dudes, you can not weld cats iron I just wondered where did you guys get that idea?
how did you create the akerman tool norbefilms ?
Hi guys,
Pretty cool just taken ours off now, quick question as i have a comp in 3 weeks did it hold ?? or break afterwards?
Thanks
Thierry
Ar padarysit Steerlock video?
Žinau keistas klausimas.
the name of last song in the video?
Hy Guys Great vid!
I ready this modify but a litle scarry..
you have experience?
no broken this parts?
maybe you have a problem
during use?
i wait you reaply
Thx Benjamin
Good tires for winter, Ignas :D
Gerai varo angliskai
normaliai, tik tas ryškus rytų europos akcentas visad yra
Kipper del to reik stengtis sneket britisk uakcentu ir su britiskom R raidem nes amerikonu akcenta ne visiems ivaldyt sekasi
+x19Julius92x Hahaha, Kuris is Britu akcentu tau ryskiausias??? Amerikosu akcentas yra lengviausias is visu angliskai kalbanciu saliu.
+Kipper Kokiu akcentu jie turi sneket? Pietu afrikos?
Good video. What would you recommend though - modified hubs (like in the vid) or 30% adapters? Also what about e46 arms, I'm just looking at every affordable option :)
This is cheaper than adapters. E46 arms are not necessary.
would you guys have some tips for cheap mods in the opel omega a?
Thx this realy help me out :D Awesome you speak english now
I cut 20mm off but have lots of tyre rub on body, i have 17x7.5 et38.......will 25mm wheel spacers be enough? Thanks.
Hey, best is to use 16" or 17" but with low-profile tires, you can easily find rims with ET20 or ET15 ET13 from E34 or E39*
*with center ring
If you want to use your current wheels, you will have ET13 with 25mm spacers, with low-profile tires it will work!
Hello, why do i have to cut that tirerod end shorter? what happens if i dont do it? I am modding ford sierra's parts.
It increases the toe angle of the alignment
love it!, shame for me that i cant do it myself
Will that work in miata too? (NA 1990)
Biški atkales Ignas bulgarkę, varo be akinių spakainas. :D
Did you say this would work on audis?
Let me know if this will work on e30 IX?
When you steer the car to the left for example, the inside wheel will steer more than the outside wheel because of it has a less distance to travel (the steering circle is smaller), so, will this modification change something around the system that does that?
This is ackerman angle. We change it to zero, so both wheels will always steer the same. It's better at big drifting angles, front wheels won't start slipping.
***** OK, thank you. Still learning how it works on different cars (didn't know it is called ackerman angle)
Does changing the Ackerman angle to zero effect the turn-in response much?
Not much, but during daily driving you can feel small change.
So I can still use as daily driver?
Net google beveik ne vieno zodzio nesupranta. Vistiek jei kurs toliau, turetu tik geret jo kalba. Prasikalbes laikui begant ;D
Tas isilginis suvirnimas gudrus bajeris, kas pamokino? :)
Chebra pasidžiaukit o ne kritikuoki ;) Ką gal ir B. Vanagui pradėsit aiškint kokio velnio pradėjo vykdyt tarptautinę komunikaciją. Lietuva yra mažiau nei pusė Londono rinka. Pagalvokit patys. Niekas čia nekalba apie patriotiškumo išdavimą ir panašiai. Mažiau kritikuokit daugiau darykit patys. Good Job norbeFilms, i hope Ignas will improve english skills a lot by creating these videos ;)
dude those welds won't hold
lmao these dudes are going to sunburn their hands!!!
has this ever gave any trouble after this modification
just welding not thought enough as casting, cause welding not fill the snap point
Jack Snype you can always pre heat the cast steel to around 300 degrees f if you're concerned about cracks from welding cast
i thought you had to pre heat cast iron before welding?
I think it's very dangerous to weld on the steering. But if it is doing good, it's okay
No glasses, no gloves, my man!
hay guys i cant find a wat to get more angle out my w124
how about a supra mk4? same thing to do?
will this work on e39 ???
it is safe?
Haha legends botch diy drift setup ... The best set-up ;)
why cutting the tie rods ??
Awsome. Thank you
rankos auksines, o visai ju nesaugai :)
Ne jie turi lietuviškai daryt, o jūs visi turit angliškai išmokt
kiek galima būt atsilikusia valstybe
Čia mes atsilikę, kad bendraujam savo gimta kalba?
Neliepiu bendraut angliškai kasdien
Bet piktintis ir nesuprasti globaliai paplitusios kalbos yra gėdinga
Kipper Pritariu.
this help me soo much
Finaly ;) Great job ! :D
is it working in mx5 too?
+Ras Asa It will work for every macpherson type suspension
+Zhon Howman thx
"and don't forget to put lower ..... " what is the rest of the sentence please ???
at 7:30
Karim Seif and will i need wheel spacers after doing this steering lock or not ???
+Karim Seif A bit late, but "And dont forget to put lower offset rims to the front to avoid tire rubbing into the chassis.
So either e34/e32 wheels in the front, or spacers.
Lower offset wheels
RIP health and safety :)))
Car ready to metalo lauzas :D
Plz make lithuanian captions, cause half of his words i didnt get :D or make another video but with your mother language :D
Dude wear some safety glasses and be carefull with your fingers...you've got 2 eyes and 10 fingers and they won't grow back ;)
+Claude V. they are Lithuanians :D
+Gatis Graustins Lol Americans do it to
I don't know about lithuanians but Latvians have 6 toes so it doesn't matter much if they lose two
They're lizard people. problem solved.
Who's mom is this?
padaryk video su whydotu!!
E30 knuckles cant be cut.. you gotta fab some blocks to move the mounting points... Also.. rack spacers
make more DYI videos !