Great install vid man! Test pieps was one of the first mods I did to my G, and although it helps alot with the performance, I wasn't crazy about the obnoxious trumpet sounds. I ended up going with the individia Gemini true dual catback with my test pipes and I love it. It sounds great, similar to stock but with an excellent deep and a bit louder tone. It’s not obnoxious at all and doesn’t sound like a trumpet. Loud is fun but it gets old quick IMO.
I posted 14 diff exhaust short vids, and I found this one company called AAM. They make a 3" and a 2.5" for our cars. I think they sound amazing. I'm not into the total straight pipe sound. If I could replicate a GTR stock exhaust, I would do it !
Stock exhaust note is golden. Never understood why people change it. I’ve had to weld back original piping twice to get back my stock note because it was rusted.
"There's no reason to have your car this loud"....."and my car is this loud" 😆😆😆 I love it. That's why I love this channel. Incredibly honest by default. The best way. 🤙🤙
Idk a little raspy and trumpet but I've heard worse I think Motordyne or Tomei exhaust soon? Long story short...My 1st G was a 05 G35 coupe manual back in 09 put like 15k$ into the car did almost everything except turbo. stillen exhaust test pipes injen intake cold air 19 in wheels with 285s tires in the rear coilovers light weight pulleys intake manifold performance chip also tuned it headlights lip spoilers grill swap stage 3 racing clutch changed master cyclinder and lightweight flywheel camberkit racing ignition coils and plugs slotted rotors etc... My 2nd 2011 auto was a G37 coupe IPL in 2018 My 3rd was in 2021 another 05 G35 coupe auto And now in 2023 an 04 auto G35 coupe. Its pretty hard to find a decent condition manual in Miami fl Deep love for these vq coupes
Wow that’s sounds amazing bro I have q70 with a 3.7 going to be installing these in soon, it’s only got a muffler delete right now I’ll be running the test pipes> oem resonators> muffler delete > stock tips. This video helped me figure out which route I wanna go. Nice car by the way!
Great video bro and I’m glad the install went smooth for you. I did this same mod on my 350Z and was worried too but it went smoothly. I used the Berk Resonated test pipes and love them. They had the O2 spacer on them as well. Keep up the good work bro
Gidday from down under!! Mate, vid was done a while ago and i haven't gone through all comments but the visible difference of moisture and gas fumes coming from the passenger side exhaust was a lot. Anything come of that? Cheers.
@@JoeVazquez i got the hks axleback on my 07 g35S sedan v36, it sounds amazing rly has a great ass deep tone, and its louder than stock id say by maybe 30 percent
Sick that you got the sponsor. But those don’t have an actual resonator. They use a baffle like the 1320 brand. If you want a real resonator, go with the Berk resonated pipes.
Hey man. Amazing video, the car sounds great after! I bought a g35 and it’s currently stock. Would you be willing to link everything in your exhaust setup in a reply to me? I’m trying to make my car sound exactly like yours. Thanks.
Mines an 07! Same rims as yours plus the ones I’m finding online all day 03-06 smh bro I want to get me a pair I’m already running a whole cat back would you lace me up a little it’s a VQ35 DE
@@JayJay-ly4er I don't even have a tune. This happened about 2 months after the ART pipe install. TBH I was expecting it so I haven't addressed the issue yet.
@@JoeVazquez Good news, I'll keep that on the DL haha - ey but if you boost & tune it no longer will be able to get smogged 90% failure with a tuned ECU
Couple things, you can’t get art pipes delivered to California, and I can’t justify spending 600+ on test pipes haha the test pipes I got were sent out to me so I didn’t pay :)
@@eman_vq8036 where did you get your art pipes? I’ve looked online and most of them are out of stock or are back orders that will literally take months just to deliver.
I know this was a sponsored mod but I really want to know how the quality is of the part. How do the welds look, are the threads and bolt holes the same as OEM, what was the quality of the supplied hardware? These look like replica Megan racing test pipes (discontinued). Figure they'd be cheaply made but it's the closest thing I've seen to the Megan line. If they're half decent I'd consider getting them.
So far so great, I did a exhaust leak test, 0 leaks! The one thing they do is sag the y pipe lower so that can be a problem. Other than that I really do think they’re solid set of test pipes, no check engine light either with the extenders
@@JoeVazquez Is the sag attributed more so to the angle the test pipes are at or because the fitment doesn't line up well? Trying to see how close to spec they really are. Truly in my car, I don't think I'll have an issue since I have a cat back Borla exhaust with an H pipe. Just double checking though, you get me?
The cats have a bracket so when you remove it the test pipes having a flex pipe actually make it sag and don’t retain a bracket. Not a huge deal but metal zip ties would fix it if it bugs you bad enough
Great video as usual sir. I went with the Megan resonated test pipes and the Megan Y pipe and I did the Tanabe medalion exhaust on my 04 sedan and mine is sagging like a bitch now because of all the flex and no mounting tabs. So now I get to spend more money having either flex cut out and replaced or extra mounting points put in. Can't win man. Lol
Honestly I’m not exactly sure but I’d say 10hp more or less, just by installing this my car was running lean so I had to reset the idle and self learn to make it adjust a/f ratio to run decent enough until a tune!
It should pass computer, as long as it’s running halfway decent haha, once you add a tune in Cali you have to either buy a new ecu to swap in or dirty smog!
So I need to replace my cats they are bad and I was stuck between getting high flow cats or resonated test pipes keep in mind the rest of the car is stock
i actually purchased these test pipes because you made it seem so good but you never mentioned that the flex pipe on the top of the test pipe causes too much vibration for the o2 sensor in the header since it sits right there… these test pipes can potentially knock those sensors out from too much vibration and that’s a 450$ fix for each side because we have 2 headers it would be rounding up to $1k fix all because someone never mentioned test pipes are not supposed to have flex pipes in the first place. moral of the story educate yourself a little more before just listening to this guy before you end up like me . flex pipe on a test pipe is no good what so ever bound to fail lucky if you last even a month like that!
I have 2 weeks with them installed and I daily this g35 everyday, I performed an exhaust leak test to see if any leaks were present at all and I had none. Saying there’s potential for the o2 sensors to back out is a valid point but to an extent, mainly because most people’s o2 sensors on the headers are basically rust welded to the header from heat cycles. If it really was too much vibration, the first thing to probably go are the nuts from the test pipes to the headers and those are still tight on my g35. Funny thing is, flex pipes are DESIGNED to do the opposite of creating more vibration (search it up), so idk who you’re getting your information from. The only con I can see with these test pipes is because they have a flex pipe they make the exhaust hang a good amount lower but daily driving this thing, I’ve had 0 issues. I can come back to this comment in 2 months and give you an update of my test pipes but your claims honestly do not make sense.
@@JoeVazquez alright man lmk how long your o2 sensors last it won’t make it to 2 months respectfully, like i said flex pipes shouldn’t be on a test pipe you’ll start to see why with time
I have poly motor mounts aswell so this is a real test to them, I’ve never heard anyone ever say their o2 sensors backed out from test pipes haha. Like I said idk what sources you have but in real world practice, they have been doing just fine. I wouldn’t promote a product if I didn’t think it was good, these are good for the price you pay. Berk resonated test pipes crack because of stress on them, people complain, then people make test pipes with flex pipes on them, people complain. Like I said flex pipes are designed to reduce vibrations NOT create more.
Almost 2 months later and 0 issues, I drive it everyday. Like I said, idk where you’re getting your info from but everything’s been running just fine. O2 sensors are still in place which I knew wouldn’t be an issue, flex pipes look the exact same as when I put them on my car. It’s upsetting to see people talk about a product they have no actual experience with, these test pipes work and serve their purpose in the budget territory. I have nothing but good things to say about them and specially for the price.
I don’t think you know what ur talking about. I’ve had these test pipes installed all last summer and have 0 issues lol. And 450$ for a o2 sensor??? Lmao
So if you know it pollutes and you say it’s not a fun time for you and the people behind you and obviously the future of your children. And you get minimal hp increase, spend your money on mods that don’t screw up the environment! 🥵🥵🥵
People drive electric cars so I can pollute with my trumpet :) haha all jokes aside I get you, I got the part for free, I’m doing content on it, so that’s the reasoning behind me installing, if I wasn’t making videos I wouldn’t have 90% of the mods I have on my car honestly
1st!
Let’s gooo!!
Great install vid man! Test pieps was one of the first mods I did to my G, and although it helps alot with the performance, I wasn't crazy about the obnoxious trumpet sounds. I ended up going with the individia Gemini true dual catback with my test pipes and I love it. It sounds great, similar to stock but with an excellent deep and a bit louder tone. It’s not obnoxious at all and doesn’t sound like a trumpet. Loud is fun but it gets old quick IMO.
That’s great!! Being loud is fun till you get annoyed of being loud haha
I posted 14 diff exhaust short vids, and I found this one company called AAM. They make a 3" and a 2.5" for our cars. I think they sound amazing. I'm not into the total straight pipe sound. If I could replicate a GTR stock exhaust, I would do it !
@@speedracer2831 I just listened to it, sounds amazing!
Stock gtr sound would be goals!!
@@V35_Obsidian right!!! I'm ordering the complete competition system. Hopefully this week.
Where do you get a o2 extender ?
Stock exhaust note is golden. Never understood why people change it. I’ve had to weld back original piping twice to get back my stock note because it was rusted.
To each their own :)
Shit that broke people say exhibit A:
I did this on my 370z yesterday sounds immense
test pipes were definitely worth it, install was so easy
2 EZ
"There's no reason to have your car this loud"....."and my car is this loud" 😆😆😆
I love it. That's why I love this channel. Incredibly honest by default. The best way. 🤙🤙
i realized right then and there, I am the problem 🥲🥲
@@JoeVazquez 😆😆😆
Idk a little raspy and trumpet but I've heard worse
I think Motordyne or Tomei exhaust soon?
Long story short...My 1st G was a 05 G35 coupe manual back in 09 put like 15k$ into the car did almost everything except turbo. stillen exhaust test pipes injen intake cold air 19 in wheels with 285s tires in the rear coilovers light weight pulleys intake manifold performance chip also tuned it headlights lip spoilers grill swap stage 3 racing clutch changed master cyclinder and lightweight flywheel camberkit racing ignition coils and plugs slotted rotors etc...
My 2nd 2011 auto was a G37 coupe IPL in 2018
My 3rd was in 2021 another 05 G35 coupe auto
And now in 2023 an 04 auto G35 coupe. Its pretty hard to find a decent condition manual in Miami fl
Deep love for these vq coupes
My G sounds literally exactly like yours beside the pops and crackles, I have HFC though and its not as raspy imo but yours sounds sick ❤️🔥
The smell is crazy so high flow cats honestly would help so much haha, but thank you bro!! 🙏
Wow that’s sounds amazing bro I have q70 with a 3.7 going to be installing these in soon, it’s only got a muffler delete right now I’ll be running the test pipes> oem resonators> muffler delete > stock tips. This video helped me figure out which route I wanna go. Nice car by the way!
Do you have to get a tune after kinda hesitant on getting some since I know some you have too or else your car will run lean
Great video bro and I’m glad the install went smooth for you. I did this same mod on my 350Z and was worried too but it went smoothly. I used the Berk Resonated test pipes and love them. They had the O2 spacer on them as well. Keep up the good work bro
That’s awesome! I was actually looking at the berk ones since I think those are also a great bang per buck!!
I just purchased these with your promo code and can't wait to get them on monday. I hope good outcome from my G35 Sedan from these test pipes
Still running them, have had no issues or leaks! Best of luck brotha 😃
@@JoeVazquezI installed these like 3 months ago and honestly, amazing power band through the entire rpm range
Definitely make a difference!!
Great video, these test pipes replace the catalytic converter? Where can I order these? Your link is disabled.
Gidday from down under!!
Mate, vid was done a while ago and i haven't gone through all comments but the visible difference of moisture and gas fumes coming from the passenger side exhaust was a lot.
Anything come of that?
Cheers.
Sheeshh sounds nice vro!!💯😈
Did you get the engine light? Also howd the flex pipe test pipes hold up? THANKS 4THE VID
Hey I have the same exact car but it’s a g37s. I don’t have a switch for loud or quite mode LOL
dope man! definitely gotta invite you out to the next roll night see how that G moves! :)
Haha just let me know and I might go!!
where did you get that part for the O2 sensors at 1:40 ???? also , no check engine light after ???? please and thank you
you will get a check engine light until you tune the car
🔥🔥🔥, now all that's left is a nice exhaust, an HKS, Tomei or a nice cat back exhaust will definitely add more sound!! 😎
I’ve been growing to really like hks sound recently!
@@JoeVazquez i got the hks axleback on my 07 g35S sedan v36, it sounds amazing rly has a great ass deep tone, and its louder than stock id say by maybe 30 percent
Sick that you got the sponsor. But those don’t have an actual resonator. They use a baffle like the 1320 brand. If you want a real resonator, go with the Berk resonated pipes.
did you make a video on your exhaust and how you got it to go into “quiet mode and loud mode” if so can u link it ?
What’s that rattling 9:09?
Good video, my guy.
Thanks man I appreciate it!
How are your Short Term and Long Term Fuel Trim levels doing with the test pipes?
Can you shoot flames with resonated test pipes?
how much this whole set up cost? if you can list them down. I’m thinking of getting this.
I'm gonna be installing res TPs as well soon. Only problem is gonna be smogs cuz I'm also from Cali 🥲
Hey man. Amazing video, the car sounds great after! I bought a g35 and it’s currently stock. Would you be willing to link everything in your exhaust setup in a reply to me? I’m trying to make my car sound exactly like yours. Thanks.
Mines an 07! Same rims as yours plus the ones I’m finding online all day 03-06 smh bro I want to get me a pair I’m already running a whole cat back would you lace me up a little it’s a VQ35 DE
Nice man. ART pipes burned one of my O2 sensor plus smog this year 😔 keep your cats if you can for that smog man...
You’re right on that honestly, I think I’ll keep them even though I think I might be boosted by next year 🥲
oh shit i got art pipes on my car does that happen? do you have a flame map or a crackle map?
@@JayJay-ly4er I don't even have a tune. This happened about 2 months after the ART pipe install. TBH I was expecting it so I haven't addressed the issue yet.
@@JoeVazquez Good news, I'll keep that on the DL haha - ey but if you boost & tune it no longer will be able to get smogged 90% failure with a tuned ECU
just found this channel here for the blow and hopefully i can buy g35 coupe soon too mayb the sedan too
Bro you should’ve gone with the motordyne art pipes , they probably run about the same price as those you got unless you got a deal on those ?
Couple things, you can’t get art pipes delivered to California, and I can’t justify spending 600+ on test pipes haha the test pipes I got were sent out to me so I didn’t pay :)
@@JoeVazquez oh yea that’s right I forgot they don’t deliver them to Cali 😬 still nice you didn’t have to pay man 🤙🏽
@@eman_vq8036 where did you get your art pipes? I’ve looked online and most of them are out of stock or are back orders that will literally take months just to deliver.
these aren’t even 200$, and they’re resonated…motordyne is 600+ and has been on back order for months
@@maartin_vq got mine from socalZ a few weeks ago and picked them up the next day locally. They really came in clutch🙏
I know this was a sponsored mod but I really want to know how the quality is of the part. How do the welds look, are the threads and bolt holes the same as OEM, what was the quality of the supplied hardware? These look like replica Megan racing test pipes (discontinued). Figure they'd be cheaply made but it's the closest thing I've seen to the Megan line. If they're half decent I'd consider getting them.
So far so great, I did a exhaust leak test, 0 leaks! The one thing they do is sag the y pipe lower so that can be a problem. Other than that I really do think they’re solid set of test pipes, no check engine light either with the extenders
@@JoeVazquez Is the sag attributed more so to the angle the test pipes are at or because the fitment doesn't line up well? Trying to see how close to spec they really are. Truly in my car, I don't think I'll have an issue since I have a cat back Borla exhaust with an H pipe. Just double checking though, you get me?
The cats have a bracket so when you remove it the test pipes having a flex pipe actually make it sag and don’t retain a bracket. Not a huge deal but metal zip ties would fix it if it bugs you bad enough
Appreciate the info Joe!
You got it!!
Add a cherry bomb resonator…
It will be less trumpet sounding and more nismo sounding… needs to
Lower The tone
where did you get the 02 extender bro?
Concept z
Great video as usual sir. I went with the Megan resonated test pipes and the Megan Y pipe and I did the Tanabe medalion exhaust on my 04 sedan and mine is sagging like a bitch now because of all the flex and no mounting tabs. So now I get to spend more money having either flex cut out and replaced or extra mounting points put in. Can't win man. Lol
Haha I agree with that, muffler shop can help with mounting up some tabs!
letsssssss goooooooooo, when we racing now !!!!!!
My cars slower now :(
@@JoeVazquez haha not even
would these work on 2004 g35 base model coupes?
All g35 coupes
All 2003-2006 g35 sedans
Those flex pipes on the rest pipes if not made right will cause rasp in the future fyi having flex pipes on test pipes isn’t the best
Thank you for letting me know, I’ll keep on eye out and definitely update you guys if anything happens with that!
Did you feel a gain in performance?
Definitely did feel a difference
2:29
test pipes adds how many horses ?
Honestly I’m not exactly sure but I’d say 10hp more or less, just by installing this my car was running lean so I had to reset the idle and self learn to make it adjust a/f ratio to run decent enough until a tune!
Do you think u will pass smog with test pipes
No not anymore haha, due to failing visual inspection
@@JoeVazquez but you know when they connect the computer you think it will now pass
It should pass computer, as long as it’s running halfway decent haha, once you add a tune in Cali you have to either buy a new ecu to swap in or dirty smog!
😮this very qood inqine motor❤
I got a G35. What type of exhaust should I get that sounds good? Not to sure what to do.
What’s your budget and How loud do you want?
Not super loud but decent loud on a scale 1-10 like a 6-7 and $400-800
@@ExoticLukeDiecast get a z1 single exit with the z1 y- pipe. it’ll sound great and look so much better
Tomei
Or motordyne if your ballin
How much to rent ur cats I need to pass smog next month ?
I wouldn’t rent mine out but I know there’s a bunch of partout people on Instagram that rent them out to you!
@@JoeVazquez do u know who ?
Have you Noticed any gains with these test pipes
My car flies now
@@JoeVazquez did your check engine light pop up I seen your car around the 805
No check engine light! And no way you serious? Say hi next time bro!!!
So I need to replace my cats they are bad and I was stuck between getting high flow cats or resonated test pipes keep in mind the rest of the car is stock
I wanna see this car tune
So do i! I almost want to learn how to tune since I’m so intrigued on it
You need proper y back exhaust now! 3inch
You’re right, although I swore I would never put any other exhaust and only replace my muffler with a turbo since I’m going with rear mount setup!!
@@JoeVazquez I can't wait for that jeeez!
what do you mean by loud mode 😅
I have an exhaust cutout so I can change how loud it is with a button!
dang bro i wish my was that loud even stock hahaha but not even that lol i will have to do the same to my car than 🙃🙃🙃👌👌👌🤟🏼🤟🏼🤟🏼🤟🏼
Haha I enjoy these test pipes 😂
@@JoeVazquez 😂😂😂 thanks for the video thoe it really helps out alot for people like me haha
You got it!!
I got state refd in 4 days 😂
Oh shit bro! 😭
My g35 sounds much better when engine is under load rather than parked. Never Rev in park to get the true sound. Always drive the car
People like to see revs and flybys so I gotta give the peeps what they want haha
What did you mean by quiet mode?
I have an exhaust cutout system where I can change it with a press of a button to go from quiet to loud
@@JoeVazquez name of product?
Exhaust cutout, they’re all over ebay!
i actually purchased these test pipes because you made it seem so good but you never mentioned that the flex pipe on the top of the test pipe causes too much vibration for the o2 sensor in the header since it sits right there… these test pipes can potentially knock those sensors out from too much vibration and that’s a 450$ fix for each side because we have 2 headers it would be rounding up to $1k fix all because someone never mentioned test pipes are not supposed to have flex pipes in the first place. moral of the story educate yourself a little more before just listening to this guy before you end up like me . flex pipe on a test pipe is no good what so ever bound to fail lucky if you last even a month like that!
I have 2 weeks with them installed and I daily this g35 everyday, I performed an exhaust leak test to see if any leaks were present at all and I had none. Saying there’s potential for the o2 sensors to back out is a valid point but to an extent, mainly because most people’s o2 sensors on the headers are basically rust welded to the header from heat cycles. If it really was too much vibration, the first thing to probably go are the nuts from the test pipes to the headers and those are still tight on my g35. Funny thing is, flex pipes are DESIGNED to do the opposite of creating more vibration (search it up), so idk who you’re getting your information from. The only con I can see with these test pipes is because they have a flex pipe they make the exhaust hang a good amount lower but daily driving this thing, I’ve had 0 issues. I can come back to this comment in 2 months and give you an update of my test pipes but your claims honestly do not make sense.
@@JoeVazquez alright man lmk how long your o2 sensors last it won’t make it to 2 months respectfully, like i said flex pipes shouldn’t be on a test pipe you’ll start to see why with time
I have poly motor mounts aswell so this is a real test to them, I’ve never heard anyone ever say their o2 sensors backed out from test pipes haha. Like I said idk what sources you have but in real world practice, they have been doing just fine. I wouldn’t promote a product if I didn’t think it was good, these are good for the price you pay. Berk resonated test pipes crack because of stress on them, people complain, then people make test pipes with flex pipes on them, people complain. Like I said flex pipes are designed to reduce vibrations NOT create more.
Almost 2 months later and 0 issues, I drive it everyday. Like I said, idk where you’re getting your info from but everything’s been running just fine. O2 sensors are still in place which I knew wouldn’t be an issue, flex pipes look the exact same as when I put them on my car. It’s upsetting to see people talk about a product they have no actual experience with, these test pipes work and serve their purpose in the budget territory. I have nothing but good things to say about them and specially for the price.
I don’t think you know what ur talking about. I’ve had these test pipes installed all last summer and have 0 issues lol. And 450$ for a o2 sensor??? Lmao
So if you know it pollutes and you say it’s not a fun time for you and the people behind you and obviously the future of your children. And you get minimal hp increase, spend your money on mods that don’t screw up the environment! 🥵🥵🥵
People drive electric cars so I can pollute with my trumpet :) haha all jokes aside I get you, I got the part for free, I’m doing content on it, so that’s the reasoning behind me installing, if I wasn’t making videos I wouldn’t have 90% of the mods I have on my car honestly
Hi stink 💗
Hi :)
Horrible Shifting
Horrible name
@@JoeVazquez don't be so emotional... it was a joke race car driver.
I was joking aswell, you have the same name as me LOL
my dumbass just noticed that shit lmfao...
This made my morning over here haha 😂