DIY sneakers with Sneakerkit - Vegtan leather

Поділитися
Вставка
  • Опубліковано 16 чер 2024
  • Find out how you can make your own leather sneakers by hand using SneakerKit - DIY.
    Check out SneakerKit here: www.sneakerkit.eu/
    Check out Radermecker leathers: bit.ly/3g9RoaS
    Leatherwork starter kit : bit.ly/3vMoC5h
    Vegtan leather: bit.ly/3oEWFbu
    LOXX closing mechanism: bit.ly/3BsJmCI
    Utility knife: bit.ly/3ODUPlz
    Strap cutter: bit.ly/3baECXD
    Metal ruler: bit.ly/3znnl5E
    Saddler's needles: bit.ly/3cEkzRw
    Cutting mat: bit.ly/3cPxkZR
    Stitching chisel: bit.ly/3bckwfq
    Mallet: bit.ly/3zQaZEB
    Exotic wood slicker: bit.ly/3barcuM
    Edge beveler: bit.ly/3Saj26g
    Thread pack: bit.ly/3PHB3qB
    Fiebing's Pro Dye: bit.ly/3binI9h
    Skiving knife: bit.ly/3ziSxTg
    Cotton gloves: amzn.to/3eQnxzz
    Alcohol burner: amzn.to/3OHZ9QX
    Stitch groover: bit.ly/3oFl0hc
    Tokonole: bit.ly/3Jef1cF
    Thread zap: bit.ly/3OIY5Mw
    Saphir renovateur: amzn.to/3zkAxI6
    Saddle soap: bit.ly/3zf0N6Q
    Leather protection cream: bit.ly/3vo7x19
    Revolving punch: bit.ly/3BH9yJZ
    -------
    I make and restore leather products in my spare time, mostly bags, backpacks and small items like wallets and card-holders. I am still learning a ton every time I take on a new project and always appreciate feedback on my creations.
    For the moment I don't take orders as I like to spend too many hours getting the finished product as good as I can : this means that if I were to sell these bags, the selling price would be way more than the bags are worth due to the hours of work involved.
    As always, do let me know what you think of this video. If you have any tips or comments please let me know by dropping a comment below this video :)
  • Навчання та стиль

КОМЕНТАРІ • 92

  • @Teyla91
    @Teyla91 Рік тому +47

    Hi, cool video! Your sneakers look really good. Just a tip.. When using the rotary punch, use a thick piece of leather under the leather you're making the holes in. This way, the punch can go all the way through your leather without hitting the anvil. This will make sure you get your holes without having to twist and wiggle the thing around, and at the same time you'll prevent it from getting dull ;).

    • @panamericaco
      @panamericaco Рік тому

      Why did noone teach me that in elementary!

  • @MrLandphill
    @MrLandphill Рік тому

    Another great video, thanks for the time you put into bringing great content to your viewers

  • @MartinGrabovac
    @MartinGrabovac Рік тому +5

    I literally bought a sneakerkit like 2 weeks ago, your video couldn't have come at a better time! Always enjoy your videos my friend!

    • @JamesBerry
      @JamesBerry  Рік тому

      Hahah perfect, have fun crafting :D

  • @ignoviv
    @ignoviv Рік тому +1

    Well done, James. Beautiful work.

  • @sean.chiarot
    @sean.chiarot Рік тому +10

    Those look great! I used a faux ostrich print leather in purple and orange for mine and receive a lot of compliments on them. And they are surpisingly comfortable, by far my favourite shoes!

    • @JamesBerry
      @JamesBerry  Рік тому +2

      Those sound like some wonderful shoes :D Love the idea of using an ostrich print leather!

  • @cannibalholocaust3015
    @cannibalholocaust3015 Рік тому +2

    I got obsessed with quality shoes before trying leatherwork and now I have a deeper appreciation for cordswainers. The level of skill, planning and conceptual thinking the high level artisans operate at is incredible. On top of that they must make a profitable business.

  • @daithi1966
    @daithi1966 Рік тому +5

    That was pretty cool. I'd want a slab of leather underneath the insert as an insole, and some kind of soft liner leather (especially around the ankles). However, in general, I like the concept.

  • @patrickmclead5534
    @patrickmclead5534 Рік тому +1

    Enjoyed watching. Thank you!

  • @villagranvicent
    @villagranvicent 2 місяці тому

    Your sneakers look absolutely amazing, the leather and that color are 💥💥

  • @mopqqq
    @mopqqq Рік тому +3

    Thanks for the build inspiration. I have 2 kits already, but not yet the nerve to try and make anything!

    • @JamesBerry
      @JamesBerry  Рік тому

      Hahah, glad I could help :) Don't wait too long, the hardest part about this build is starting ;)

  • @GollumBeetus
    @GollumBeetus Рік тому

    Haven’t watched it yet, but I saved it to watch later but I just wanted to say that I can’t wait to sit down and enjoy it. You always bring good content to the table

    • @JamesBerry
      @JamesBerry  Рік тому +1

      Thank you so much Andrew for your kind message! So glad you like these videos :)

  • @alweron
    @alweron Рік тому

    OMG thanks for sharing this, I am SO gonna buy these and try and make my own!

    • @JamesBerry
      @JamesBerry  Рік тому

      Glad this could inspire you to try it :)

  • @markking-hazel3326
    @markking-hazel3326 6 місяців тому

    Stumbled upon this video never in my life have I even had the thought of making my own shoe/sneaker. After seeing this video I 100% want to have a crack at a pair 🙏

  • @Timsturbs
    @Timsturbs Місяць тому

    interesting. and so simple. probably will work great with denim.

  • @carz2me
    @carz2me Рік тому

    i love the outcome of the shoe its so nice, i cant imagine that any one can make shoe that great, where do you get or did you download the shoe patern? i like to try it.

  • @jakubkropacek2250
    @jakubkropacek2250 Рік тому

    Great video, thank you. Is it possible to estimate, if you cut the templates as efficiently as possible, how much leather you would actually need?

  • @sons.moon.leather
    @sons.moon.leather Рік тому

    Pretty cool, I’ve been eyeing the Chuck Taylor kit from District and this seems very similar.

  • @DomP1989
    @DomP1989 Рік тому

    Can you please post a video of how the shoes hold up? I’m very curious.

  • @JoeEcho1429
    @JoeEcho1429 Рік тому

    Was thinking about trying this? Any thoughts on cheap leather to practice on? Been sewing bags and more heavy duty things never leather.

  • @Tammy-un3ql
    @Tammy-un3ql Рік тому +1

    Great idea, thanks

  • @kp7castin150
    @kp7castin150 4 місяці тому

    When I was younger did not have much money were I was and a used to get shoes top and bottom from different brands and put them together for my own use they came out great all by hand and glue thank to that hard time and survived skills today here is this great country I rebuilt the interior on gator skin imitación vinyl my 84 diesel GMC suburban great work man

    • @JamesBerry
      @JamesBerry  4 місяці тому

      Oh wow, love this :D It's always wonderful to hear what people can achieve when they put their heads to it, especially if it allows to be creative!

  • @psalmboy_outdoor
    @psalmboy_outdoor Рік тому +1

    Glueing the soles could be a good addition to the the assembly.

  • @ianthomas3653
    @ianthomas3653 Рік тому

    Those came out awesome. I want to try this so bad its some pull up oil tan with veg-tan or chrome-tan accents.

    • @JamesBerry
      @JamesBerry  Рік тому +1

      So glad you like them :)
      My next pair will be black soles with black ghost leather with white wax - letting the patina take over!!!

  • @alainwiard6517
    @alainwiard6517 Рік тому

    Hi James, Would it be possible to have your feedback on the following? I made almost the same sneakers as yours but in the lower version. Of course, they are not as beautiful as yours, but I'm happy with the result. My problem is the size. Usually I',m comfortable with a size 43 (EU) which I took. But the sneakers are really too small, even after trying to "extend" the leather a little bit. What is your experience with this? Could it be that it is caused by the thickness of the leather (I took the 2 mm from Raedermeckers as you)? What do you think? Thank you for your feedback. Alain.

  • @overlyskinned
    @overlyskinned Рік тому

    Hi. Can you please tell me what the correct length would be for the high top laces? No guidance on the sneakerkit website! thank you.

  • @MarylandWearAndCarry
    @MarylandWearAndCarry Рік тому

    What country manufacturers the soles provided in the kit? Thank you

  • @KpomoBespoke
    @KpomoBespoke Рік тому +1

    I am a shoemaker myself. Impressive work.

    • @JamesBerry
      @JamesBerry  Рік тому +1

      Thank you for your kind words :)
      I don't see this as shoemaking as you're not building a sole or insole, lasting the shoe, building a heel block etc... Shoe making is so much more complex than this.
      Anyway, I appreciate your comment!

  • @fattohead
    @fattohead Рік тому

    Great! Is it really comfy when the interior leather is raw and not covered with some sort of fabric? Or do you prefer to only wear it withc socks ?
    BTW; how is the sizing? Does it fit as your usual foot number or should us order 1 size bigger or smaller etc?

    • @eliasross4576
      @eliasross4576 Рік тому

      Leather is fine on the bare skin (like on Birkenstock sandals) but isn’t breathe able so I’d suggest socks to keep your foot cooler.

  • @DarrinTaylortails
    @DarrinTaylortails Рік тому

    Hey James, nice video, how solid are the soles, i'm guessing that that wuld be the weak point in the shoe as the rest you could remake, would you think about glueing the leather to the soles for added strength? hope you are well.

    • @JamesBerry
      @JamesBerry  Рік тому +1

      Hey Darrin! The soles are very comfy but they're definitely not as sturdy as the hard leather soles I'm used to - at best on par with most sneakers.
      I've actually gone ahead and added an thin outsole from Amazon to the bottom for a slightly harder grippy feel.
      I considered gluing the leather but that would make it really hard to sew (if not near impossible) even if I were able to line up all the holes perfectly during the glue-up process. I may try that for the next pair I make however!
      Thanks for your message, hope all is well for you also :)

  • @AnchoredLeatherworks
    @AnchoredLeatherworks 11 місяців тому

    Nice work! I have a sneakerkit that's been sitting around for almost a year because I've been too nervous to start it. I like how yours turned out. One thing I don't understand is the stitch line that continues around the ankle opening of the leather. Isn't that just one layer of leather or did I miss something?

    • @JamesBerry
      @JamesBerry  11 місяців тому +1

      Thanks for the kind words :)
      Yes I think they propose a stitch there which is purely decorative. That's why I chose to add a structural piece instead.

  • @alainwiard6517
    @alainwiard6517 Рік тому

    Salut James, ou peut-on trouver ce joli fil couleur miel? Merci. Alain

  • @BORIS21610
    @BORIS21610 7 місяців тому

    It looks great without cobler work

  • @rastaricky9584
    @rastaricky9584 7 місяців тому

    What is the weight of the leather?

  • @Thishumanis1111
    @Thishumanis1111 8 місяців тому

    Too bad I am only seeing narrow toe'd shoes kits and none with a natural foot shape. You know the kind, with a wide toe box....I would love to make my own shoes.

  • @boomish69
    @boomish69 Рік тому

    Wow they look amazing! But how much did the cost? I looked up the leather f that was £300! I’m not sure how many you could get from that size leather but doesn’t look many, still hand made shoes wow.

    • @JamesBerry
      @JamesBerry  Рік тому

      True, the leather costs a fair bit but I only used a small portion.
      I estimate the total cost of the shoes at around 80 to 100$ in the end, not counting the time that went into making them. So if you have the leather and the time, it's a great project and knowing that I'm the one who made them makes them so much more special :)

  • @Rikyloebis
    @Rikyloebis Рік тому

    How to get pattern this shoes?

  • @peachy5454
    @peachy5454 8 місяців тому

    This is super useful. I can get shoes that aren't made using child labor and sweatshops, which America uses for nearly all their shoes.

    • @JamesBerry
      @JamesBerry  8 місяців тому +1

      Absolutely! Glad to hear you liked the video :)

  • @ximonbear9513
    @ximonbear9513 Рік тому

    Wooo, it is so beautiful, how cost of pattens?

    • @JamesBerry
      @JamesBerry  Рік тому

      Glad you like it :)
      The pattern is free on SneakerKit's website.

  • @wardogdauwdd3020
    @wardogdauwdd3020 11 місяців тому

    I love to see you do this again but take uncolored leather and carve your channel Logo and color dye mach it make a 1 of 1 channel shoe

  • @roipaz8671
    @roipaz8671 Рік тому

    And the images using the sneakers?

  • @milothetinker
    @milothetinker Місяць тому

    I feel like you might want to glue the soles to the uppers

  • @MrShnazer
    @MrShnazer Рік тому

    No footbed?

  • @thefrog9119
    @thefrog9119 Рік тому +1

    Bravo !👏🏻
    Etant donné ma non expérience dans le domaine du cuir, je ne suis pas sûr d'arriver à un tel résultat.
    J'attends de voir la patine du temps faire son effet... #patinaislife
    Anyway, those will not need to be cut in half by @roseanvil 😁

    • @JamesBerry
      @JamesBerry  Рік тому +2

      Hahah merci :D
      Ca fait une semaine que je les maltraite sur un chantier et pour le moment elles tiennent très bien le coup! Je les ai bien ciré et huilé avant en préparation mais j'ai hâte de voir le cuir prendre vie une fois rentré à la maison et après un brin de toilette et d'amour.
      Et pour Roseanvil, même si j'adore ses vidéos, pas moyen que je lui laisse mes godasses !!

  • @lowspeak
    @lowspeak Рік тому

    Are they comfortable without a lining?

    • @JamesBerry
      @JamesBerry  Рік тому +1

      They are actually not bad at all though a lining would definitely help!

  • @user-kv7tn9fo2b
    @user-kv7tn9fo2b 15 днів тому

    Скажите пожалуйста,где можно купить такую подошву для изготовления этой модели обуви?

  • @user-kv7tn9fo2b
    @user-kv7tn9fo2b Рік тому +1

    здравствуйте,отличная работа
    скажите пожалуйста существует выкройка пдф этого изделия ,чтоб можно было скачать?

    • @JamesBerry
      @JamesBerry  Рік тому

      Thanks, glad you like it :)
      Yes, SneakerKit have PDF templates available on their website.

  • @oakridgereview1359
    @oakridgereview1359 Рік тому

    I’ve been putting this off for a while 😅

  • @hithardbutfoul3027
    @hithardbutfoul3027 Рік тому

    This is a huge leap from self checkout at the grocery store

  • @avantsai3239
    @avantsai3239 Рік тому +1

    😃👍👍👍👍👍👍👍👍👍👍👍👍

  • @alainwiard6517
    @alainwiard6517 Рік тому

    Ma-gni-fi-que

  • @sebastienrogeon3728
    @sebastienrogeon3728 Рік тому

    Dommage que ce soit en anglais je comprend rien du tout 😢

    • @JamesBerry
      @JamesBerry  Рік тому +1

      Désolé Sebastien... peut-être que l'option de sous-titres t'aiderait? Google a fait de bons progrès sur ce point ces dernières années.

  • @frankcastle3827
    @frankcastle3827 Рік тому

    You forgot to use glue

  • @jamesnurgle6368
    @jamesnurgle6368 Рік тому

    seems weird not to have a leather insole

  • @antagonizerr
    @antagonizerr Рік тому

    Working with dry leather is the biggest beginner mistake. A spray bottle of water would have saved tons of work and pain.

  • @djrobbligidy
    @djrobbligidy Рік тому

    Red or green thread for the sole stitching would’ve been supreme

    • @JamesBerry
      @JamesBerry  Рік тому

      Not sure about red but I could have gone for green :D

  • @JayOhEnEnWhyEx
    @JayOhEnEnWhyEx Рік тому

    It's DIY not dyi...

    • @JamesBerry
      @JamesBerry  Рік тому +1

      How did I miss this... *facepalm*
      Thanks for the head's up Jonny!

    • @JayOhEnEnWhyEx
      @JayOhEnEnWhyEx Рік тому

      @@JamesBerry super easy mistake to make and easy fix 😀

  • @tonyfrontiero288
    @tonyfrontiero288 Рік тому

    I think if you cemented them as well it would be good.

  • @yesimyesim1578
    @yesimyesim1578 Рік тому

    There is no vegtan leather! Even artificial leather has a real leather piece

    • @JamesBerry
      @JamesBerry  Рік тому

      Are you talking about "vegetable tanned" leather (referring to tanning animal skins using natural vegetable tannins) or vegan leather (referring to fake leather that does not include animal skin)?

  • @actualartist3082
    @actualartist3082 Рік тому

    i wanna make me some Pueblo shoes now...

    • @JamesBerry
      @JamesBerry  Рік тому

      Hahah I was thinking these could be cool in some waxed ghost leather to really show off the patina :D