I have that same medicine cabinet that you replaced and was able to install it recessed. Not sure why they market it as surface mount only when there is little difference between other cabinets that offer both methods of installation. Thanks for your video! I learned a lot for next time!
I installed mine (same model) recessed as well, but about 15 years ago! It is showing wear now, and I took it out to see if paint will help enough. If I were putting in a new one, I would cover the inside of the mirror where my fingers go to open the doors. The paint and silver backing of the mirror has worn away there.
Just take your time. You can always make the hole bigger but not smaller. That little camera is really handy for a job like this. You don't want to cut the hole and find out there are pipes or wires in the way.
I enjoyed your video very much, lots of good tips, I definitely want a folding tape measure. I recently bought a 1960 house and whoever put in the light and medicine cabinet in the bathroom did not see your video.Very sloppy and not level. I will be following you, thanks.
Generally if a wall is running parallel to the joists above it then it is not load bearing. However it not that simple. If you are unsure you should consult a professional.
Hello, Thank you for the video.. Where did you buy the cabinet and what metal is it made of? I am trying to replace an old recessed cabinet with an odd size; 36.25” wide x 40” height x 4.75” deep. The surrounding rough opening is tile. Custom made cabinets today are very expensive. I may be forced to refurbish the old one. Again thanks and hope you had a nice Thanksgiving. David from Greenpoint, Brooklyn
It was a Kohler from the Home Center, made of mostly aluminum. Try Facebook groups in your area to find a hobbyist woodworker. You may be able to get a cabinet made at a decent price.
@@HouseDoctorRayThank you. I am an 80 year old retired furniture maker, but I specialized in Antique furniture restoration. I know how easy it is to build. I had to close my atelier in 2001. I was pleased to hear you remind people to drill pre holes, but basically to avoid splitting the wood being drilled into. We also used to apply a dab of wax on the screws. Thanks again, David Linker Ebéniste
They were just screws holding the drywall in the adjacent room. No worries, there are plenty of screws left. But it is a good idea to make sure there aren't shelves or cabinets opposite where you are planning to install one.
Using the oscillating tool to cut the drywall screw to preserve the opposite wall is a genius idea!!!
2:23 lol. This is why I start on projects earlier in the day to make it to Home Depot before the afternoon
Good thinking Ollie.
I have that same medicine cabinet that you replaced and was able to install it recessed. Not sure why they market it as surface mount only when there is little difference between other cabinets that offer both methods of installation. Thanks for your video! I learned a lot for next time!
Thanks J
I installed mine (same model) recessed as well, but about 15 years ago! It is showing wear now, and I took it out to see if paint will help enough.
If I were putting in a new one, I would cover the inside of the mirror where my fingers go to open the doors. The paint and silver backing of the mirror has worn away there.
I was always scared to do something like this, you made it look (somewhat) easy.
Just take your time. You can always make the hole bigger but not smaller.
That little camera is really handy for a job like this. You don't want to cut the hole and find out there are pipes or wires in the way.
I enjoyed your video very much, lots of good tips, I definitely want a folding tape measure. I recently bought a 1960 house and whoever put in the light and medicine cabinet in the bathroom did not see your video.Very sloppy and not level. I will be following you, thanks.
Thank you Melinda.
DIY has gotten a lot easier with so much free content available!
Nice video. Thanks for the tips on the installation.
Thank you and thanks for watching
Thank you for sharing your video. Looks really nice you did an awesome job.
clean work. great job!
Thank you.
Very helpful, thank you.
Glad you found it useful.
How do you know if the stud is load bearing?
Generally if a wall is running parallel to the joists above it then it is not load bearing. However it not that simple.
If you are unsure you should consult a professional.
All good until my wall is 5/8" short on depth! It's always something
Add some 3/4" square molding to the back of the mirror frame.
Hello, Thank you for the video.. Where did you buy the cabinet and what metal is it made of? I am trying to replace an old recessed cabinet with an odd size; 36.25” wide x 40” height x 4.75” deep. The surrounding rough opening is tile. Custom made cabinets today are very expensive. I may be forced to refurbish the old one. Again thanks and hope you had a nice Thanksgiving. David from Greenpoint, Brooklyn
It was a Kohler from the Home Center, made of mostly aluminum.
Try Facebook groups in your area to find a hobbyist woodworker. You may be able to get a cabinet made at a decent price.
@@HouseDoctorRayThank you. I am an 80 year old retired furniture maker, but I specialized in Antique furniture restoration. I know how easy it is to build. I had to close my atelier in 2001. I was pleased to hear you remind people to drill pre holes, but basically to avoid splitting the wood being drilled into. We also used to apply a dab of wax on the screws. Thanks again, David Linker Ebéniste
What about the things that were nailed/screwed into the studs that were cut away?
They were just screws holding the drywall in the adjacent room. No worries, there are plenty of screws left. But it is a good idea to make sure there aren't shelves or cabinets opposite where you are planning to install one.
What if you find wiring in the middle of the recessed area? Light switch.🤔
You'll have to relocate the switch.
I want to install a surface mount medicine cabinet as a recessed one, but have it stick out just a little bit, screw it in and caulk the sides.
What is That? Love it
Thanks for watching.
I'm doing mine now and I have a question. Do you have to add some other studs because you cut out the existing one? So the construction is all good?
If it's a single stud you should be fine. If they're doubled could be load bearing.
@@HouseDoctorRay thank you
Too small. How about a big one? How about installing into the wall the one you took down?
Same process just cut a bigger hole.
How much do you charge for that
I don't do that kind of work for hire any longer.
If you are trying to get an idea of costs try Homewyse.com.
It's Jimmy Kimmel's brother!
Haha. Thanks for watching.
Doc, u can’t go hacking away at a load bearing wall like that.
Not a load bearing wall. There were two studs there because on the opposite wall I have two closets. That spot is where they met.