If you're in Europe and looking at buying a laser, I'd like to encourage you to fly, drive or catch a train over to Norfolk, UK to come to the workshop and take a look at our laser/spend the day with us talking lasers. Norwich is the closest city, and we can pick you up from there if needed. There's a train stop closer to the workshop... but I have no idea where it goes! We love talking lasers, and would be happy to discuss your requirements, doubts, questions about buying chinese vs 'name brand', whether it's AccTek or other. I've owned/worked with 6 brands of chinese laser, trotec speedy 300 and 400, and epilog lasers for over 8 years.
I'm looking to cut 24x48inch sheets of plexiglass so i need i machine around this size. I however noticed the 1390 brings up about 4-5 brands of what appears to be the exact same machine (shape/size/specs etc) and am wondering what one of those names you might recommend. Keep in mind I only intend to cut that one material of that size.
To follow up on this 5 months after posting, about 6 months after delivery - the laser is still going strong, its used 6 days a week, sometimes only for a few minutes by usually for several hours. The tube is reading 128W at the tube after about 6 months of use. Cheap tubes would have maxed out their hours by now and have needed replacement. We're running this mostly at 100% power. We're still trying to figure out why the P18 powersupply has around a 15ms rise time to full power. I'd recommend anyone else to buy the EFR laser powersupply instead of the RECI as they advertise a max of 1ms rise time, RECI do not advertise a rise time at all - this is *really* important for engraving. Other than that - no issues what so ever with the laser, it's very well built from quality components.
This was a seriously good presentation. Two thumbs up for your efforts in putting this video together. I would love a laser CNC like this one. If I had the extra money, or maybe even when I have the extra money, I'll be following your advice on purchasing something of this quality. You should have 1000x more views. Subscribed!!
Thanks Andre, much appreciated. Hoping to figure out more data capability soon so I can get back to uploading, I only have mobile data at the moment which is very limiting (most of the videos on the channel are over 1gb to upload!)
Great video, what made you choose acctek out of interest compared to blue elephant or gweike for example? I had a quick look and they seem to be the two largest co2 makers on alibaba. Also Are you still offering help with getting a laser fitting your needs?
What an amazing detailed filming! Thank you so much. I see this is an older recording. Have they upgraded since then? Do you know Can you please list all the changes you made in your comments field? Where did you buy it from Regards
Hello Minnie,Thanks for your interest in our laser machine, i am andy from acctek cnc, if you want to know more about this laser AKJ1390, i can send you more details , my whastapp: +8615254150505 email:export06@acctekcnc.com
Proximity sensors; They are accurate well within 0,02mm. Not 0,4mm. good ones will creep well below 0,01 repeatability. Microswitches can be relative accurate, but will vary over time and have a mechanical moving part. The cheap steel lip might seem wrong, but the proximity sensors depend on the influence of an electromagnetic field, although a simple steel lip (as poorly executed as here) works perfect and in the long run will outperform a microswitch.
Thanks I was more keen on checking out the company and quality of the build. I am in the process of buying a 1kw Fiber laser from AccTek AKJ1325F the funny thing it has the RECI W6 130W and fiber laser combined as a option for a extra 1000usd. in 1985 I worked for a company as scientific instrument maker building lasers and the sealed tube lasers we were making were flat out producing 70w and was lucky to get 300 hours out of them but being for medical work it was not too bad. I just never expected a China made laser tube to preform that well including the HV power supply's. May contact you when it comes to transferring $$ to China as its about 27k in usd and I'm freeing out about that more. Anyway all the best from Vanessa at L2K.
Way to go! Great video and explanations. I just got my first Chinese machine and after a lot of research I made it a bit tailor made too. Buying straight from the manufacturer was the best thing I could’ve done, as u said, upgrades are way cheaper. I also made the same mistake to buy it CIF and here in Tallinn they charged me more than 600€ to receive it and do the paperwork... great advice of yours. Also, with all the upgrades, how come u didn’t upgrade to hybrid servo motors on the XY? Cheers
Hello Cabani,you can deal with seller by FOB,CIF or DAP, CIF means seller pay for the freight only , buyer need pay the local sea port charge and customs duty, finish the customs clearance. for the laser machine,stepper motor with belt is ok, hubrid servo motor is similar to the stepper compared the machine Performance
Amazing video. Thanks for making it so clear! I might be in the market for a lasercutter soon so hopefully if you are still able to I would really appreciate if I could ask you some advice around whats best for me. Thanks again!
Great videos, thanks for posting them. Any thoughts or knowledge of StyleCNC? They seem to be nearly a twin to the Acctek, perhaps made in the same factory(ies) in Jinan, and I am looking at both Acctek and them, be interested in any feedback you have or are aware of.
mix co2 laser cutter for metal and nonmetal, use ruida 6332M controller, RDC6445G is for normal nonmetal co2 laser ,my whastapp:+8615254150505 email:export06@acctekcnc.com
Hi Mark, can you please share images of the red dot laser beam that you had installed to go through the mirrors. I cannot explain this to the Chinese supplier of the laser. If I have some images it will help. Many thanks
Hi Mark, loved this video and I'm chatting with Jack in China. I have sent an email to you, not sure if you received it. Would love to come and chat about lasers and your overall business too
I have been talking to acctek for few weeks now, i have quoted the 1390M with dual tubes 300w and 100w and dual head for metal and general cutting / engraving, is there any parts you would recommend having swapped out on they're end before shipping. This is my first laser so im not very experienced in Chinese general parts like rails , belts ect. Is the up down table something you need, they're charging an extra 200 bucks for it .
The up and down table is worth every penny. I don't own such a big machine, I was chatting with Acctek about 2 months ago but I decided for a small 5030 that was available in Europe and easier for me to set up and buy. It has an up and down motorized table and it makes working with it so easy ;) GET IT!
Hi, sent you a test email about laser purchase assistance, If there is a list of what to buy and in what quantity I'm sure that would help everyone. Not a window shopper here, but have never owned a Laser. I did build a 4 axis 4' x 8' router, the rotary max length center to center 40 inches. Laser assistance welcome.
Great video. Wish I'd seen it before I bought my 1610-2. Just received it a few days ago and in the process of setting up. I paid 13k for mine and 2700 customs and logistics fees. Quick question. Were the hoses for the laser tube already attached? I'm trying to get mine one the tube and is a nightmare
I Just found you and wish to thank you for producing such a great video with great content. I have subscribed and may return for some information . Take care, from Oz.
Bonjour, merci pour cette très bonne vidéo de présentation, j'envisage l'achat d'un laser co2 et vous allez me faire aimer le matériel chinois. Je vais vous envoyer un mail pour plus d'info sur le suivi administratif d'un tel achat. Merci encore Vincent
Thanks for your great video. It is our honor to work with you. Please let us know if you need some support from us in near future. By the way. can we forward the video to our pages?
@@thewoodshoplife8849 cool thanks for info. One thing i have noticed is that the high voltage is mixed with the low voltage line in the wiring channels
you aware of that reci is a chinese brand right? and compared with european brands it can be considered a cheap chinese stuff not less but in price is cheap
If you're in Europe and looking at buying a laser, I'd like to encourage you to fly, drive or catch a train over to Norfolk, UK to come to the workshop and take a look at our laser/spend the day with us talking lasers. Norwich is the closest city, and we can pick you up from there if needed. There's a train stop closer to the workshop... but I have no idea where it goes! We love talking lasers, and would be happy to discuss your requirements, doubts, questions about buying chinese vs 'name brand', whether it's AccTek or other. I've owned/worked with 6 brands of chinese laser, trotec speedy 300 and 400, and epilog lasers for over 8 years.
I'm looking to cut 24x48inch sheets of plexiglass so i need i machine around this size. I however noticed the 1390 brings up about 4-5 brands of what appears to be the exact same machine (shape/size/specs etc) and am wondering what one of those names you might recommend. Keep in mind I only intend to cut that one material of that size.
To follow up on this 5 months after posting, about 6 months after delivery - the laser is still going strong, its used 6 days a week, sometimes only for a few minutes by usually for several hours. The tube is reading 128W at the tube after about 6 months of use. Cheap tubes would have maxed out their hours by now and have needed replacement. We're running this mostly at 100% power. We're still trying to figure out why the P18 powersupply has around a 15ms rise time to full power. I'd recommend anyone else to buy the EFR laser powersupply instead of the RECI as they advertise a max of 1ms rise time, RECI do not advertise a rise time at all - this is *really* important for engraving. Other than that - no issues what so ever with the laser, it's very well built from quality components.
Hi Mark, If they replace the EFR power supply will this still work with Ruida controller and the RD Works software?
Can you tell me about your experience with acctek? What about aftersale service? Are they responding to you?
This was a seriously good presentation. Two thumbs up for your efforts in putting this video together. I would love a laser CNC like this one. If I had the extra money, or maybe even when I have the extra money, I'll be following your advice on purchasing something of this quality. You should have 1000x more views. Subscribed!!
Thanks Andre, much appreciated. Hoping to figure out more data capability soon so I can get back to uploading, I only have mobile data at the moment which is very limiting (most of the videos on the channel are over 1gb to upload!)
Hei thank you the information are great! In 2021 do you suggest again ACCTEK for laser? (i want a chinese laser)
Great video, what made you choose acctek out of interest compared to blue elephant or gweike for example? I had a quick look and they seem to be the two largest co2 makers on alibaba. Also Are you still offering help with getting a laser fitting your needs?
Hello have you had issues with returning home were the head keeps going
What an amazing detailed filming! Thank you so much. I see this is an older recording. Have they upgraded since then? Do you know
Can you please list all the changes you made in your comments field?
Where did you buy it from
Regards
Hello Minnie,Thanks for your interest in our laser machine, i am andy from acctek cnc, if you want to know more about this laser AKJ1390, i can send you more details , my whastapp: +8615254150505 email:export06@acctekcnc.com
Proximity sensors; They are accurate well within 0,02mm. Not 0,4mm. good ones will creep well below 0,01 repeatability. Microswitches can be relative accurate, but will vary over time and have a mechanical moving part. The cheap steel lip might seem wrong, but the proximity sensors depend on the influence of an electromagnetic field, although a simple steel lip (as poorly executed as here) works perfect and in the long run will outperform a microswitch.
Thanks I was more keen on checking out the company and quality of the build.
I am in the process of buying a 1kw Fiber laser from AccTek AKJ1325F the funny thing it has the RECI W6 130W and fiber laser combined as a option for a extra 1000usd.
in 1985 I worked for a company as scientific instrument maker building lasers and the sealed tube lasers we were making were flat out producing 70w and was lucky to get 300 hours out of them but being for medical work it was not too bad. I just never expected a China made laser tube to preform that well including the HV power supply's.
May contact you when it comes to transferring $$ to China as its about 27k in usd and I'm freeing out about that more. Anyway all the best from Vanessa at L2K.
ok Vanessa, we can chat more about the laser and confirm all your questions
my email: export06@acctekcnc.com whatsapp: +8615254150505
Thank you! Helpful! please give some updates how it is going.
Do you have a build spec sheet that can be provided tp have them make a machine as you recomend?
Thanks
Way to go! Great video and explanations. I just got my first Chinese machine and after a lot of research I made it a bit tailor made too. Buying straight from the manufacturer was the best thing I could’ve done, as u said, upgrades are way cheaper. I also made the same mistake to buy it CIF and here in Tallinn they charged me more than 600€ to receive it and do the paperwork... great advice of yours.
Also, with all the upgrades, how come u didn’t upgrade to hybrid servo motors on the XY?
Cheers
Hello Cabani,you can deal with seller by FOB,CIF or DAP, CIF means seller pay for the freight only , buyer need pay the local sea port charge and customs duty, finish the customs clearance. for the laser machine,stepper motor with belt is ok, hubrid servo motor is similar to the stepper compared the machine Performance
Did you ever decide if you were going to distribute these stateside? Looking to purchase and I'm having issues getting ahold of someone in China.
Amazing video. Thanks for making it so clear! I might be in the market for a lasercutter soon so hopefully if you are still able to I would really appreciate if I could ask you some advice around whats best for me.
Thanks again!
my whatsapp +8615254150505, email:export06@acctekcnc.com
@@acctekcncandyliu4384 hello do you have full specs of your machine so l can order one from company direct any info much appreciated. great vid
@@purdie3dandlaserworks622 hi , you got me ?
Is this the standard model or did you have upgrades done for this spec?
Great videos, thanks for posting them. Any thoughts or knowledge of StyleCNC? They seem to be nearly a twin to the Acctek, perhaps made in the same factory(ies) in Jinan, and I am looking at both Acctek and them, be interested in any feedback you have or are aware of.
hi sir, you can come here to check who is manufacturer
Thank you for the video, I liked it, very informative.
Nice machine, I like it. I am owner of K40 laser, and having only 200x300 mm working area is pain in the....
yea, K40 is small laser,mainly for personal, our is for industry and hoby both .
Hello everyone, the laser machine power is RECI W6 130-150W,
Ruida RDC-6332G or Ruida RDC-6445G If you had a choice what is the best and what would you pick
mix co2 laser cutter for metal and nonmetal, use ruida 6332M controller, RDC6445G is for normal nonmetal co2 laser ,my whastapp:+8615254150505 email:export06@acctekcnc.com
Hi Mark, can you please share images of the red dot laser beam that you had installed to go through the mirrors. I cannot explain this to the Chinese supplier of the laser. If I have some images it will help. Many thanks
you can contact me ,my whatsapp +8615254150505, email:export06@acctekcnc.com
Hi Mark, loved this video and I'm chatting with Jack in China. I have sent an email to you, not sure if you received it. Would love to come and chat about lasers and your overall business too
very strong machine
I have been talking to acctek for few weeks now, i have quoted the 1390M with dual tubes 300w and 100w and dual head for metal and general cutting / engraving, is there any parts you would recommend having swapped out on they're end before shipping. This is my first laser so im not very experienced in Chinese general parts like rails , belts ect. Is the up down table something you need, they're charging an extra 200 bucks for it .
The up and down table is worth every penny. I don't own such a big machine, I was chatting with Acctek about 2 months ago but I decided for a small 5030 that was available in Europe and easier for me to set up and buy. It has an up and down motorized table and it makes working with it so easy ;) GET IT!
my whatsapp +8615254150505, email:export06@acctekcnc.com
The Acctek STJ1390M Mixed co2 laser cutting machine dual head, what do you think on it. 300w /80w
500w and 600w is more powerful,my whastapp: +8615254150505 email:export06@acctekcnc.com
@@acctekcncandyliu4384 Does it have to be dual head
@@kenf2662 yes, it is optional, if you want to do engraving, suggest you choose one 80w laser head
Are you still offering advice with laser purchase?
markh@mythiccrafts.com
Hi, sent you a test email about laser purchase assistance, If there is a list of what to buy and in what quantity I'm sure that would help everyone. Not a window shopper here, but have never owned a Laser. I did build a 4 axis 4' x 8' router, the rotary max length center to center 40 inches. Laser assistance welcome.
Great video. Wish I'd seen it before I bought my 1610-2. Just received it a few days ago and in the process of setting up. I paid 13k for mine and 2700 customs and logistics fees.
Quick question. Were the hoses for the laser tube already attached? I'm trying to get mine one the tube and is a nightmare
Love this, thank you.
Hi, can it cut 9mm MDF?
need use at least 100w co2 tube.
Its not "Custom Built" just different options ordered
yea, different optional parts, like laser power, up and down table,red dot etc
Great info. Are you still offer your expertise? The contact email address mentioned is nowhere to be found.
hi ken , i am andy from acctek cnc,Mark is busy maybe, so do not answer you in time, my whatsapp +8615254150505, email:export06@acctekcnc.com
I Just found you and wish to thank you for producing such a great video with great content. I have subscribed and may return for some information . Take care, from Oz.
OK ,John, any questions,pls contact me : export06@acctekcnc.com whastapp:+8615254150505
OK ,John, any questions,pls contact me : export06@acctekcnc.com whastapp:+8615254150505
I like it very much
please Guide Me For Metal Laser Cutting Machine .
hi sir , how much thickness of the metal you need cut? there are 180w 500w 600w optional , my email:export06@acctekcnc.com whatsapp:+8615254150505
Bonjour,
merci pour cette très bonne vidéo de présentation, j'envisage l'achat d'un laser co2 et vous allez me faire aimer le matériel chinois.
Je vais vous envoyer un mail pour plus d'info sur le suivi administratif d'un tel achat.
Merci encore
Vincent
my whatsapp +8615254150505, email:export06@acctekcnc.com
Hi, how can I contact you?
export06@acctekcnc.com whastapp:+8615254150505
Thanks for your great video. It is our honor to work with you.
Please let us know if you need some support from us in near future.
By the way. can we forward the video to our pages?
You're welcome to link the video, but please do not upload it to your own channel :)
Okay Thanks
great video. Does the machine has "pass through on all sides? And can you post that email address
No, just front and back. I'm not sure what pass through on all sides would do for you to be honest. You can email me: markh@mythiccrafts.com.
@@thewoodshoplife8849 cool thanks for info. One thing i have noticed is that the high voltage is mixed with the low voltage line in the wiring channels
I too would like to know whether you still offer your expertise? The contact email address mentioned late in the video is nowhere to be found.
markh@mythiccrafts.com
you aware of that reci is a chinese brand
right?
and compared with european brands it can be considered a cheap chinese stuff
not less but in price is cheap
yea, reci is chinese, but we hardly use it