Це відео не доступне.
Перепрошуємо.
DIY Drill Guide | Drill Perpendicular Holes Without a Drill Press
Вставка
- Опубліковано 6 чер 2021
- Here's a simple DIY drill guide to help perpendicular or 90-degree holes without a drill press.
hacksbydad.com
@HacksbyDad
Thank you for supporting my channel through Patreon... / hacksbydad
A drill guide will help to consistently drill 90-degree holes with a hand drill. Drill guides are commercially available but are pricey. This simple do-it-yourself project provides an inexpensive alternative.
Also, please check out my Amazon Storefront... www.amazon.com...
This video is for entertainment purposes only. Rely on the information in this video at your own risk.
That metal on metal seems like a good way to dull your bit.
I guess so if you press the bit hard against the metal corner brace and angle the bit too much. I just use the jig occasionally so I'm not worried about dulling my bits.
Thanks for the feedback!
😎
I don't think wood drill bits work this way. The swirls are to extract sawdust. From their side, drill bits are more or less flat. Only the tip sharpness matters.
without the metal bracket, the bit may abrade the inside corner of the wood and your bit may not actually be going straight in
For everyone that is asleep! It is impossible to drill a hole at a perfect 90 degree angle without some sort of jig!!! I think it was a great idea and you can’t beat the price! Thanks for the tip!
Thanks! Much appreciated!
Thanks for the advice. When I build an outerspace rocket I'll use a jig.
I just built mine have you statted@@mtlicq
This could actually be handy. One thing to help might be to add some sort of nonstick surface to the bottom to keep it from walking.
Hey… that’s a great idea! I’ll stick on a few self adhesive anti-skid pads. Thanks!
😎
We really gonna act like that jig didn't move while drilling?
Just glue 80 grit sandpaper underneath the jig or clamp it. This just a demo
I can still see daylight in the first butting up to the drill bit?
Yup! Not perfect, but good enough for most of my needs. I can’t drill anywhere near perpendicular without the jig. 😎
I might be having a blond moment here LOL but what is the sense of this video? What is it used for? Thank you
He’s made a guide so that he can ensure that he is drilling a straight hole.
Bro you could have just made a drill guide with 1 piece of wood
You over complicated this
Thanks! You’re right, but the other hole is too close to the corner and would interfere with larger drill bits. Also, adding the other pieces of wood made the rig more stable.
Too complicated for a simple job and the result is not that accurate.
It looks like a solution for a problem that doesn’t exist.
I guess I might be one of the few who can’t drill a near perpendicular hole without a drill press. My attempts by eyeballing it with cordless drills are always way off the mark.
😎
@@HacksbyDad I’m not drilling perpendicular either which I notice when using a hammer drill in concrete. I have learned not to push to hard and let the drill do most of the work.
@@janverhave Thanks! I'll keep that in mind the next time I'm working on something.
😎
When you're working with a piece through which you need a bolt to enter and exit perpendicalirily, this matters a lot. That's why press / column drills exist.
Maybe just hold the drill perpendicular to your work 🤔
LOL
Believe me... I've tried so many times and failed miserably. I just don't have the eye to drill a hole close to perpendicular and need a jig.
😎
@@HacksbyDad I don’t think anyone can do it by hand and make it perfect. Thanks for the idea
Q tonteria
Joe Biden buys first one
Trump invented it.
F J B ! & F J T
Guess this why I am not a carpenter.....because this was a waste of time 😂😂😂
LOL 👍
Sounds like a you problem.
Makes no sense
It's a guide to drill holes perpendicular to the piece of wood. Without it... my holes are way off angle when I try to eyeball it. LOL
😎