I don't know why you made this change, but believe me you made my vision a reality. that bike is unwatchable with its original wheels, even if it has potential, you gave it glory with the supermoto wheels. 🔝💯 just one question, how much did all the components necessary for the conversion cost?
Thanks!! The items needed are listed in the description. Where you also can see the price of the conversion kit. The wheels are of a MT07. They should be available second hand.
Nice details, did you do any changes to the Geometry of the steering head/tripple clamps? With the smaller diameter front wheel i van imagine the bike steers more "nervous"?
Hi There, and thank you. I did not make any changes to the steering head/triple clamps. It was not necessary to make any adjustments to that. The steering is amazing in this setup. Only thing to worry about is higher mounted footpegs if you go really wild with this setup.
Thank you very much. I am not in the possession of the exact measures as the company who did it for me filed off piece by piece until it fits the bike. I am sorry
Hola !!! Buen trabajo !!! Es posible comprar a usted el kit de casquillos , tornillos y espaciadores necesarios para montar las llantas de mt07 ? Gracias y un saludo !!!
Well, there actually is. Check the description where you can buy the conversion kit. You only need to buy yourself some second hand Yamaha MT07 wheels.
Hello, I have attached a link in the description of Ebay where you can buy all of it. I know people want to create it by their own, but I don’t know anything about that so I let a Pro figure that out for me and made them available through ebay.
@JaxsRacingGarage I have a milling machine in brothers workshop , why not just machine new brake caliper brackets to match the disc offsets and make new spacers to suit , caliper offset brackets are used on supermoto conversions and even spindle reducer spacers etc that don't require machining hubs to take larger bearings, you weakening the bearing shoulder in the cast ally hub ? I've done a few wheel conversions and been lucky not to take and metal out from the hubs and sourcing bearing from various suppliers
You bought the conversion kit you mean? The company which file of my rim did the measurement and piece by piece until it fits. not sure what the actual values are.
I buy also wheels for sm project and i have friend who will make me everything like you but can you tell me for spacers and bearing wich dimension is i see for spacer 22x20 and 22x22 74x22 but which diametera is out lines and how much is mm inlines
Ombouw is het absoluut waard, vooral tijdens trackdays kan je je lol op. Vering niet perse nodig voor deze ombouw, ander soort voetstepjes zijn wel aan te raden omdat je die erg snel aan de grond heb in deze setup. En je remleidingen aan de voorkant moeten via de andere kant van het spatbord langs omdat de banden zo breed zijn.
Came out really nice! Too bad we have TÜV and I don't want that shitshow struggle... I wanted to put spoked 17" supermoto wheels on my Tenere but none with TÜV certificiate... Someone suggestest a shop from the Netherlands and they have some really nice wheels but then again no TÜV garbage...
@JaxsRacingGarage Sadly no, only model specific rims for example for KTM bikes. I've already asked Haan and they confirmed no TÜV certificate for 17" wheels for Tenere...
Hi there can I ask few questions please, ref to MT07 wheels, is there a certain year of wheels I need and do the t7 discs and sprocket for the MT wheels. Many thanks
@@paulrossfry1976 wheels unfil 2021 will do. You can transfer the sprocket with the t7 rim kushdrive over to the 17 inch rim. And disc of a t7 and mt07/09 are the same sizes
Mate that looks great! You should sell these conversion kits! I want 2 kits please, I am going to hunt marktplaats for mt07 rims now🥰 Btw, did you manage to solve problem of the frontwheel rubbing the fork guards?
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
I don't know why you made this change, but believe me you made my vision a reality. that bike is unwatchable with its original wheels, even if it has potential, you gave it glory with the supermoto wheels. 🔝💯 just one question, how much did all the components necessary for the conversion cost?
Thanks!!
The items needed are listed in the description. Where you also can see the price of the conversion kit. The wheels are of a MT07. They should be available second hand.
Nice details, did you do any changes to the Geometry of the steering head/tripple clamps? With the smaller diameter front wheel i van imagine the bike steers more "nervous"?
Hi There, and thank you.
I did not make any changes to the steering head/triple clamps. It was not necessary to make any adjustments to that. The steering is amazing in this setup. Only thing to worry about is higher mounted footpegs if you go really wild with this setup.
Question, does the abs ring work on the stock hubs as well? Was looking to do supermoto wheels as well but lace them to the stock hub. Thx!😊
I really dont know
Man, it looks savage 👍💪, really cool looking bike. How does it ride with enduro suspension and smt wheels? Is ok if you breaking?
It dives a bit. But I upgraded my suspension also so it handles great!
Thanks for your quick response 👍😉
You literally created a monster this looks so awesome
haha thanks, made me laugh! I agree, it is an absolute beast in this setup.
Hi nice Tuto thanks i will do the Same can you just let me know how many mms need to be removed from the MT07 disc Seat ? thanks Nice Job
Thank you very much.
I am not in the possession of the exact measures as the company who did it for me filed off piece by piece until it fits the bike. I am sorry
@@JaxsRacingGarageHi one more question did you re-use the OEM front bolts for your front discs ? After having machined your front wheels? Thanks
Hola !!!
Buen trabajo !!!
Es posible comprar a usted el kit de casquillos , tornillos y espaciadores necesarios para montar las llantas de mt07 ? Gracias y un saludo !!!
I will reach out to the guy that made it and ask
@@JaxsRacingGarage I'm interested too in this kit. Thanks!!!
Wow, it looks great with those wheels and tires. I wish there was a kit I could buy I would turn mine into that.
Well, there actually is.
Check the description where you can buy the conversion kit. You only need to buy yourself some second hand Yamaha MT07 wheels.
Hoi super gave conversie! Hoe heb jij die onderdelen laten maken? Want die wil ik ook wel voor mijn tenere.
Bij iemand in engealnd
Zodra ik zijn gegevens kan vrijgeven hoor jet
can you tell me how new the abs ring teeth are, and which size are the bearings for the front rim
Hello, I have attached a link in the description of Ebay where you can buy all of it.
I know people want to create it by their own, but I don’t know anything about that so I let a Pro figure that out for me and made them available through ebay.
Hi I’d be very interested in any help with contacts for conversion parts I live in the uk
@sven21 on instagram
Gaaf zeg. Weet je toevallig of de wielen van een MT09 ook passen?
Ja mt07 en mt09 zijn hetzelfde
Have you encountered any issues with the front wheel bearings due to how thin the walls are machined to?
@@lizurdoflife666 so far so good. Been usimg them for a while
@@JaxsRacingGarageThank you!
What size did you open up the hub to take the new bearings and how much thinner did you make the wheel hub on the front ? Thanks
@@Rust_valley_adventures let the company meassureit to prevent misreading
@JaxsRacingGarage I have a milling machine in brothers workshop , why not just machine new brake caliper brackets to match the disc offsets and make new spacers to suit , caliper offset brackets are used on supermoto conversions and even spindle reducer spacers etc that don't require machining hubs to take larger bearings, you weakening the bearing shoulder in the cast ally hub ? I've done a few wheel conversions and been lucky not to take and metal out from the hubs and sourcing bearing from various suppliers
@@Rust_valley_adventures well this is my way Im not saying its the way. But the machine shop checked everything and said its good.
Nice job and explanation of the custom parts.I have a question.i think the front wheel is mounted in the "wrong" direction.Why is that?
Is it because of the abs ring?I thing on the T7 is on the left fork and at the rim of the mt07 on the right fork.
@@requinride8981 good eye. And indeed because of the abs. Tires are on the right way it doesnt affect the riding
Nice work. In my opinion it’s look better with the low fender at the front. I think the fender of the MT-10 fits.
@@JensKamp indeed good option
Def want some wheels wish they were made regularly.
Looks like a suspension drop is in order perhaps.
Suspension drop not really necessary, rides amazing!
Hola!! Tengo todo preparado para hacerlo, pero necesito saber cuántos milímetros hay que limar a la llanta, gracias!
You bought the conversion kit you mean?
The company which file of my rim did the measurement and piece by piece until it fits. not sure what the actual values are.
I buy also wheels for sm project and i have friend who will make me everything like you but can you tell me for spacers and bearing wich dimension is i see for spacer 22x20 and 22x22 74x22 but which diametera is out lines and how much is mm inlines
@@ivanvracun3746 i dont understand the question
so basically the rear wheel doesnt need any machining, just the extra spacers and abs ring? Are the discs oem yamaha that come with the 07 wheels?
Yes indeed!
@@JaxsRacingGarage great. and how does the bike behave on motorways please? Say long range motorway touring?
En, nog steeds tevreden met de ombouw? Is het de moeite waard? Ben benieuwd of je nog andere aanpassen hebt moeten doen aan bijv vering.
Ombouw is het absoluut waard, vooral tijdens trackdays kan je je lol op.
Vering niet perse nodig voor deze ombouw, ander soort voetstepjes zijn wel aan te raden omdat je die erg snel aan de grond heb in deze setup. En je remleidingen aan de voorkant moeten via de andere kant van het spatbord langs omdat de banden zo breed zijn.
Came out really nice! Too bad we have TÜV and I don't want that shitshow struggle... I wanted to put spoked 17" supermoto wheels on my Tenere but none with TÜV certificiate... Someone suggestest a shop from the Netherlands and they have some really nice wheels but then again no TÜV garbage...
Haan rims has no tuv?
@JaxsRacingGarage Sadly no, only model specific rims for example for KTM bikes. I've already asked Haan and they confirmed no TÜV certificate for 17" wheels for Tenere...
That sucks
Hey dude. What year MT07 wheels have you used? Thanks.
Gen 1 and 2 abs is oke from 07 and 09
So up to 2020 before they turned jnto cyclopses
Ziet er echt vet uit nu overweeg ik om een tenere te kopen ivp een 701 op deze manier
Vraagje klopt de km teller nog een beetje ?
Ja zit bij de kit een andere abs ring!
Nice
How many millimeters did you mill down for the brakediscs on the rim?
Let this measured bij the people who are going to mill it donw.
Just take the t7 rim without disc and the 07 rims without discs and let them do the measuring.
How did you adjust the speedometer for the 17" tire size?
Different abs ring
Obrigado@@JaxsRacingGarage . Which one did you install?
@@valdemarjoaquim9822 they come with the conversion kit
@@JaxsRacingGarage Obrigado
⚠️ Caution Amazing Content ⚠️
ahahah thanks!
I would choose this bike than a Multistrada Pikes Peak
Thanks, agree with you
Hi, can give the outer dimensions of the rings
www.ebay.co.uk/itm/166086952709?hash=item26ab8dc705:g:gjcAAOSwJUNkWn-s&amdata=enc%3AAQAIAAAA4Eu%2FNYbnyD3sDXB3CEaOK0A3YLdvWHQM%2FrPwHMt5Gz8TBYrYWcvZKmkea5Nnr2vvU%2BnOrtRsjth%2BC0JlkvA%2B2fvMpGVH%2Bt7YhNH8ZJLCoksJP%2BLXhqdEN5W87cOKWoInkWodc4L9RCJYgQ9RBZWsN6pvw8UtrGHfCT1FEYE8IauBiCQknBBzXwZts29Ujz7POPhs1P5axVBh%2BdM8SMynHdOajoFIb%2F3RkSnpTT5m9os%2Fqc1ttD2K2%2BcQEUfsnFy3wsaxG7YbhzLkB0jtBBHexB8Yuy5nwp7N6GsVezwseF8N%7Ctkp%3ABk9SR-afq5mAYg
Hi there can I ask few questions please, ref to MT07 wheels, is there a certain year of wheels I need and do the t7 discs and sprocket for the MT wheels. Many thanks
@@paulrossfry1976 wheels unfil 2021 will do. You can transfer the sprocket with the t7 rim kushdrive over to the 17 inch rim. And disc of a t7 and mt07/09 are the same sizes
@@JaxsRacingGarage so I need mt07 wheels off a 2021 bike no older
Also are tracer mt07 wheels the same and thanks for your help and I get the year now, any wheel b4 2021 thanks again
Cush drive and sprocket from MT07 or fron Tenere?
It is explained in the video 🤙🏻
Can i ask what is the frond fairing beak or some link to find it
The short one is supermoto fender from polisport. The longer one is yz 450 2016 fender
Mate that looks great! You should sell these conversion kits! I want 2 kits please, I am going to hunt marktplaats for mt07 rims now🥰
Btw, did you manage to solve problem of the frontwheel rubbing the fork guards?
Thanks! I will contact the guy🙈
Haha bro i wil order them whitout hesitation. I think you found a hole in the market
What size tyres did you use front and back please 👌
Stock 07 sizes 120/70 180/55
Thanks bud, how did you sort the front shock guards rubbing wheel, I have order all the bits, should have my all done next week 👌
@@paulrossfry1976 just let them rub🤣 and now they dont rub any more haha
What Kawasaki model are the brake disc bolts from?
I dont know exactly local dealer gave them when I mentioned the size I wanted
@@JaxsRacingGarage perfect! And are the abs discs from any Yamaha model or are they custom made?
@@WENRIPoncefernandez link is in the bio for the hardware parts like abs rings and spacers
@@JaxsRacingGarage OK thanks !
hello, do you have to machine the rims of the MT07?
Yes like i exploitatie in the vid. The front rim
THANKS. super machine the T7 in supermoto
Cool🤘🤘
Thanks
Ziet er goed uit, heel dik!
🤘🏼
💅💅💅💅👍👍👍😍😍😍😍
😎
Putain je croyais que c'était Bassem qui faisait de la moto 😂😂😂😂😂😂😂😂😂😂😂😂
oui
so hard hahahahahha
😎
wish u can make more video, custom more
motorbike@@JaxsRacingGarage