LoRa based IoT Smart Agriculture Monitoring & Automatic Irrigation System using ESP8266 & Blynk 2.0
Вставка
- Опубліковано 23 лип 2024
- In this tutorial, you will learn how to make a LoRa based IoT Smart Agriculture Monitoring and Automatic Irrigation System using ESP8266 NodeMCU, Arduino Nano, and the new Blynk IoT 2.0 platform.
***************************************
Get 1-2 Layer PCBs only at $5
www.pcbway.com/?from=theiotpr...
Build Time: Only 24 hour
Gerber File of this project: iotprojectsideas.com/lora-bas...
***************************************
Project Description:
Here on the sensor node, we will use the Arduino Nano board and SX1278 LoRa-02 Transceiver module. Then we will interface multiple sensors like capacitive soil moisture sensor v1.2 to measure the quantity of water present in the soil. DS18B20 waterproof temperature sensor to measure the temperature of the soil. Similarly, In the cold season plants die due to fog and low temperature. Thus, DHT11/DHT22 Temperature & Humidity sensor is used to measure the temperature and humidity of the surroundings. A 5V Single channel relay module and water Pump are used for an automatic irrigation system.
On the receiver side, I have connected the SX1278 LoRa module to the NodeMCU ESP8266 module because it has a built-in wi-fi chip. So that LoRa receives the data and ESP8266 board uploads these parameters to the internet of things (IoT) server. As people suggested to me on the previous project, I decided to use the new Blynk IoT 2.0 Platform. Here I can monitor those data from anywhere in the world from web dashboards as well as a mobile application.
***************************************
► LoRa based IoT Smart Agriculture Monitoring & Automatic Irrigation System using ESP8266 & Blynk 2.0
► Project Schematics + Source Code: iotprojectsideas.com/lora-bas...
***************************************
***************************************
► IoT Smart Agriculture Monitoring & Automatic Irrigation System using ESP8266 || Blynk IoT Cloud
► Project Schematics + Source Code: • IoT Smart Agriculture ...
***************************************
***************************************
#esp8266lora #iotsmartagriculture #lorainagriculture #automaticirrigation #blynkiot #esp8266automation #esp8266project
***************************************
Components Required:
1. NodeMCU ESP8266-12E Board ► amzn.to/3sCrEbj
2. Capacitive Soil Moisture Sensor ► amzn.to/3nyL9y7
3. DHT22 Temperature & Humidity Sensor ► amzn.to/32VEw1X
4. 0.96" I2C OLED Display ► amzn.to/3kvENyc
5. DS18B20 waterproof Temperature Sensor ► amzn.to/33EkMQq
6. PIR Motion Sensor ► amzn.to/3navcxS
7. Rain Detector Sensor ► amzn.to/3frrDPG
8. 5V Single-Channel Relay Module ► amzn.to/31Felf5
9. 5V Small Buzzer ► amzn.to/3I5qhXl
10. Few jumpers wires ► amzn.to/3klh0A4
11. Breadboard ► amzn.to/3H2tbeQ
12. LoRa SX1278 Transceiver Module ► amzn.to/3G6xapO
***************************************
**************Some Recent Projects**************
► IoT Energy Meter using INA219 Sensor ESP8266 & Blynk 2.0
► • Video
► ESP8266 Based Smart Kitchen Automation & Monitoring System
► • Video
► RFID based Attendance System using Arduino and SIM800L Module with SMS Notification
► Project Schematics + Source Code: • RFID-based Attendance ...
► IoT Based Battery Monitoring System Using ESP8266 & Arduino IoT Cloud
► Project Schematics + Source Code: • IoT Based Battery Moni...
********************************************
Time Stamps:
00:00 LoRA Based IoT Smart Agriculture Monitoring & Irrigation System
01:03 Story behind this project
02:58 Components required
03:43 LoRa Frequency Allocation
04:08 Circuit Diagram connection/Schematic
04:30 Custom PCB for LoRa & IoT in Smart Agriculture
05:47 Setting up Blynk 2.0 IoT Cloud Dashboard
06:08 Creating Blynk New template
07:00 Creating New Blynk Datastream
08:16 Creating Events on Blynk for Notification Alerts
09:05 Design the Blynk 2.0 Web Dashboard
09:56 Source Code/Program: ESP8266 & LoRa based IoT Smart Agriculture
11:02 Blynk IoT 2.0 Mobile application setup
11: 57 Reconfiguring wi-fi credentials on a device without hardcoding
12:40 LoRa based Smart Agriculture Monitoring on Serial Monitor
13:04 Project Demonstration
14:20 Conclusion
***********************
***********************
Follow us on Social Media:
► Facebook: / iotprojectsideas
► Twitter: / theiotprojects2
► Website URL: iotprojectsideas.com
************************
Please Subscribe to this Channel and Never Miss any Future Projects
► Channel Link: / @iotprojectsideas
Thank You for Watching
~-~~-~~~-~~-~
Please watch: "Relay Control with Arduino & DWIN HMI Display"
• Relay Control with Ard...
~-~~-~~~-~~-~ - Наука та технологія
► LoRa based IoT Smart Agriculture Monitoring & Automatic Irrigation System using ESP8266 & Blynk 2.0 ► Project Schematics + Source Code: theiotprojects.com/lora-based-iot-smart-irrigation-system-with-esp8266-blynk/
First of all thankyou for your tutorials they are amazing, so i had a question is it possible to send the data from the Esp8266 to The things network rather than to Blynk and if so mind pointing me to a tutorial? Thanks in advance.
How do i connect the water pump, pls tell me
lora blynk control and heat notification ds18b20 can you make a relay thermostat
i keep facing the same issue, could any help with this
14:30:39.416 -> >[324] INIT => CONNECTING_NET
14:30:39.463 -> LoRa Receiver
14:30:39.463 -> Starting LoRa failed!
and am not able to connect my esp8266 to wifi.
I get "Lora sender failed"
im getting "failed to read from dht sensor".can you please help me out
hi
did the app work with you?
i keep facing the same issue, could any help with this
14:30:39.416 -> >[324] INIT => CONNECTING_NET
14:30:39.463 -> LoRa Receiver
14:30:39.463 -> Starting LoRa failed!
and am not able to connect my esp8266 to wifi.
please can i get assist
Receiver Program - mentioned following pin values
#define ss 15
#define rst 16
#define dio0 4
But the Receiver Circuit diagram pin connection is -
NSS - D8
RST D0
So let me know the correct pin configuration.
As per ur code , receiver side data is not receiving and unable to see data at blynk web and also app.
Even 8266 is not connecting to blnk.
plz check and make corrections.
Receiver side ur not mentioned proper code
@@anilnaik8565 bro i have same problem can you give me this solution
i keep facing the same issue, could any help with this
14:30:39.416 -> >[324] INIT => CONNECTING_NET
14:30:39.463 -> LoRa Receiver
14:30:39.463 -> Starting LoRa failed!
and am not able to connect my esp8266 to wifi.