LoRa Project Arduino ESP8266 control Relay with feedback | Lora Tutorial using RYLR998 Lora module
Вставка
- Опубліковано 28 бер 2022
- In this Lora tutorial, I have shown how to make the Lora project Arduino ESP8266 control relay with real-time feedback using the RYLR998 LoRa module. Explained both the transmitter and receiving LoRa circuit and source code and how to configure the LoRa module with AT commands.
PCBA from $0 (Free Setup, Free Stencil) jlcpcb.com/RHS
Download PCB Gerber file for the transmitter LoRa ESP8266 circuit
iotcircuithub.com/wp-content/...
LoRa module Purchase Link:
Official website: reyax.com/tw/products/?term_i...
REYAX Indian Distributor: cparkb2c.in/shop/reyax-rylr998/
Amazon: amzn.to/3FNjsc9
TechDesign: www.techdesign.com/market/rey...
I have covered the following topic in this ESP8266 Arduino Lora project:
01:04 Demonstrate this Arduino ESP8266 Lora home automation project
02:51 Explained Transmitter ESP8266 Lora circuit
03:15 Explained Receiving Arduino Lora circuit
05:44 Explained source codes for the Arduino ESP8266 LoRa project
06:56 Connecting the LoRa module with Arduino and ESP8266
07:18 Control high voltage appliances with LoRa Module
Required components for the Transmitter Lora circuit:
1. Lora Module REYAX RYLR998 1no
2. ESP8266 NodeMCU 1no
3. 1k Resistors 2no
4. 4.7k Resistor 1no
5. 10k Resistor 1no
6. 5-mm LED 2no
7. 0.96" OLED Display
8. Push button 5no
Required components for the Receiver Arduino Lora circuit:
1. Lora Module REYAX RYLR998 1no
2. Arduino UNO 1no
3. 5v 4-channel Relay Module 1no
4. 2k Resistor 1no
5. 4.7k Resistor 1no
6. 5-mm LED 1no
7. Push Buttons or Switch 4no
Amazon India Affiliate links:
NodeMCU: amzn.to/3fJA4EG
Arduino UNO: amzn.to/35nNQwI
4-channel 5V Relay Module: amzn.to/2BQ5Y3o
OLED Display: amzn.to/3JJnVOV
Amazon United States Affiliate links:
NodeMCU: amzn.to/2WoR2A2
Arduino UNO: amzn.to/3Dmz5Xr
4-channel 5V Relay Module: amzn.to/3r2HuJ4
OLED Display: amzn.to/3uC2Orr
Required Components for the NodeMCU Transmitter Lora circuit PCB:
1. REYAX RYLR998 or RYLR896 1no
2. ESP8266 NodeMCU 1no
3. 1k Resistors 2no
4. 4.7k Resistor 1no
5. 10k Resistor 2no
6. 5-mm LED 2no
7. Push button 6no
8. Jumper 2no
9. Terminal connector 2 pin 1no
10. OLED Display
Help my projects on Patreon: / techstudycell
Feel free to donate any amount: paypal.me/sdaspay
Download Code for this Arduino NodeMCU LoRa project from the following article.
iotcircuithub.com/lora-projec...
Important Links:
Previous Lora Tutorial video: • How to use LoRa with A...
Datasheet REYAX RYLR998 Lora Module: reyax.com/tw/wp-content/uploa...
AT command guide for REYAX Lora module: reyax.com/tw/wp-content/uploa...
Important points:
1. The Network ID and BAND should be the same for the transmitter and receiving end Lora module.
2. Set the BAND as per the eligible LoRa bands in your country.
3. You can use any other microcontroller for this Lora project.
4. All the AT commands for configuring the LoRa module are written in the void setup() function of the source code.
5. The range for this LoRa project will be up to 5KM in rural areas. (Range will decrease if the number of obstacles increases in the signal path).
6. After the restart you have to wait till the STATUS LED turns OFF.
7. Please watch the complete video, otherwise you may face some issues.
**Please take proper safety precautions while working with high voltages.
During this Lora tutorial video, I have explained all the required information to make this LoRa project. You can use any microcontroller with the LoRa module. Both the microcontroller and LoRa module communicate through the serial terminal at the 3.3V logic level.
The range for this LoRa module is up to 10KM, So this project is very useful in rural are where WiFi is not available. The range may decrease in urban areas due to more obstacles in the path.
#lora #arduino #esp8266
-----------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more such projects: iotcircuithub.com/
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudycell/
-----------
-----------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
-----------
Other useful IoT projects:
Latest NodeMCU projects playlist:
• NodeMCU Projects
Arduino Home Automation Projects playlist:
• Arduino Projects - Наука та технологія
Great project, making this one. Like to try it without the pcb.
Excellent work sir
Thanks
Great test
Thanks
Very interesting and I am thinking of using this for my farm.
Great..
Good job bro....... Lora 15 km complete project
Thanks
LoRa is the best🥰
Excellent Bro
Thanks
Nice 👍
Thanks
Nice project
Thanks
🔥🔥🔥🔥🔥🔥🔥
Hi.Thanks for video.Can you try this project with Lora ebyte E32/E22 or sx12XX series?
gooooooood luck bro
Hola, podría hacer con el módulo Lora ra-01 sx1278?
I have RYLR998, when set band using At command "AT+BAND=865000000", it remember only when it is connected, when i disconnect and connect and ise "AT+BAND?"
it shows +BAND=915000000Hz, why it is not remembering BAND?
The tutorial only has the Gerber file to download. What happened to the BOM / PIckAndPlace ones? I wanted to get the PCB board made but, I'm stuck without it.
may i know which site u use to draw the circuit diagram? i had searched many but some of them are missing with components.
Puedes hacerlo asi pero que controle 2 placas de 4 relay cada una ?
Hi man, can help with a video, where you control L293D motor DC with Alexa and ESP8266?
Wow and first Comment 🤩
👍
Which antenna to use increase the range
Can use another nodeMcu/esp8266 instead of the arduino receiver ?
hi, why we have to use relay? can we bypass without using relay? so it executes intantly without delay?
Can we use lora-02 white the same shematic and code !?
i cannot see buyying option in the ryax module it is very difficult to buy iy so please tel me alternative modules
What's the practical range of communication?
Please is it tested for the 5km ?
It's possible using The Things Network?
Super project 😀👍
Quick question: Where do I find the Lora tape for Germany and the other settings (Lora Networkid etc.) where I need for the code ?
You will find the AT command guide and source code download link in the description.
@@TechStudyCell What do you mean by AT command guide ? Can I find there the frequency of Germany where I need ?
@@TechStudyCell Hi, I have sent mail Please Check ! I need this for a big school campus. Where 1 hp motor relay will be controlled remotely, I am willing to pay for the solution. Please reply Soon.
Bro above links for lora purchase is not working.can I get indian purchase link please.
We want you to make a three phase smart automatic starter for the water pump please.
Ok
Can this Lora model transmit temp & soil resistance for the same distance in addition?
Yes
Pcb drawing tutorial plsss...
Bro how to make jammer
bro,alternative lora module could you please suggest me for this project
I have to check....
Could you please a make video on AC light dimmer using Arduino iot cloud
Ok
@@TechStudyCell thanks 😊
Sir lora se wifi rang exandet
It should be something that we control with a smartphone.I have watched all your videos but did not find any such video.
Please check recent videos
@@TechStudyCell I have seen your video who uploaded before 2 days.
I need help please
Hi sir
Sir ye project work nii kr rha
Code error transmitter circuit
Sir how to re-enter the code to esp
When i try to re-enter the code it is showing fatal error
Disconnect the NODEMCU, then program it
How can we buy it sir
I mean set
Is coding Lora easier than NRF24L01? I find NRF24L01 difficult to code.
I think so. Not hard
हमे भी किट मिल सकता है
Please sir.
check you email.