ESP8266 Lora based IoT Smart Irrigation System using Arduino Nano & Capacitive Soil Moisture Sensor
Вставка
- Опубліковано 19 сер 2024
- High quality & Only 24 Hours Build time:
www.pcbway.com...
Download Circuit diagram and Programming:
www.electronic...
Other Long Range Lora projects:
Soil Moisture meter for plants using sim7600G-H and Blynk:
• Soil Moisture Monitori...
Latest Soil Moisture Sensor:
• Soil Moisture Sensor w...
Arduino Lora SX1278 Getting Started Tutorial:
• Lora SX1278/76/77/79 A...
Arduino Lora SX1278 Two Way communication:
• Arduino SX1278 Lora ba...
Multiple Sensors Monitoring using Arduino and Lora SX1278:
• Multiple Sensors Monit...
How to make a schematic and PCB:
• Nodemcu ESP8266: Nodem...
Description:
In today’s Episode you will learn how to make an IoT Smart Irrigation system using Nodemcu ESP8266 Wifi module, 15Km Lora Transceiver modules, Arduino Nano, and Capacitive Soil Moisture Sensor V1.2.
This area is around 6 Kilometers from my friend’s house. Currently, in this area no GPRS signals are received and As per my friend’s demand, he wants to monitor the soil moisture on his Cell phone. As no internet is available in this area, so we cannot use any internet supported devices like the Nodemcu ESP8266 or ESP32 modules on the transmitter side. So due to the 6 kilometers long distance we will have to use long range radio frequency modules.
Thanks to the Reyax Technologies for making such an amazing Long Range 15Km transceiver modules. On the transmitter side Lora module is used with the Arduino Nano to send the Sensors data to the Receiver. ON the receiver side , the Lora module is connected with the Nodemcu ESP8266 Wifi module. At this point you can directly connect the Nodemcu Module with the Laptop and monitor the data on the serial monitor or you can design a cell phone application and monitor the data from anywhere around the world.
****
Amazon and Banggood Purchase links:
*****************
Reyax Lora:
amzn.to/35JG0cg
Nodemcu ESP8266:
amzn.to/3sx24l4
LM7805 Voltage Regulator:
amzn.to/3tZx0uH
470uf capacitor:
amzn.to/3m5Nj6r
330-ohm resistor:
amzn.to/3w8PA5i
DC Female Power Jack:
amzn.to/31qcZ4b
Female Headers:
amzn.to/2QFLQYN
Male Headers:
amzn.to/3lZvt5d
LEDs:
amzn.to/3dsRt4D
Other Must-Have Tools and Components:
Arduino Nano USB-C Type ( recommended):
amzn.to/4ahGLdk
ESP32 WiFi + Bluetooth Module for iOT Projects (recommended), more IO pins, improved speed, and supports a Lipo Battery:
amzn.to/3v40DkE
Top Arduino Sensors:
amzn.to/3vZbnfM
Super Starter kit for Beginners
amzn.to/3cq56C5
Top Oscilloscopes
amzn.to/3ctF3d8
Variable Supply:
amzn.to/2PEAqE7
Digital Multimeter:
amzn.to/2QGRPg1
Top Soldering iron kits: "best"
amzn.to/39nqDtb
Top Portable drill machines:
amzn.to/3suQMh7
Jumper Wires:
amzn.to/2NYPEDA
3D printers:
amzn.to/3ruG1dt
CNC Machines:
amzn.to/3cuZWVv
Electronics Accessories:
amzn.to/3sueV7z
Hardware Tools:
amzn.to/3m9UhaN
Banggod Product links:
Arduino Uno R3:
www.banggood.c...
Arduino Mega R3:
www.banggood.c...
Arduino Nano:
www.banggood.c...
Complete Soldering Iron Kit:
www.banggood.c...
Digital Multimeter:
www.banggood.c...
The most complete starter kit for beginners:
www.banggood.c...
Drill Machine for PCB:
www.banggood.c...
Solder wire:
www.banggood.c...
Wirecutter, stripper complete set:
www.banggood.c...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
Follow me on Facebook:
/ 190031841821771
About the Electronic Clinic:
Electronic Clinic is the only channel on UA-cam that covers all the engineering fields. Electronic Clinic helps the students and other professionals to learn electronics designing and programming. Electronic Clinic has tutorials on
Arduino
Raspberry PI
image processing
gsm based projects
Bluetooth based projects
esp8266 projects
Nodemcu projects
robotics
desktop application designing and programming
#loraproject #longrangelora #iotsmartirrigation
I truly enjoy your presentation and the quality of your teaching. Thank you.
i am glad, you liked it. Thank you.
Waah bhai.
Kafi din baad aaye lekin jabardast video lekar aaye.
saw a weed plant nice
Nice plants
Very nice ! Excellent video !
Awesome Bhaiya
Another great content.
thanks dear
Great sir
0:39 is that weed leaves😉😉
Really good
thank you so much.
Excellent project
Many thanks
Thank you
Is that a weed field...😳😳🍁🍁...
Sir
I have to make on a pump 5kilometers away for irrigation.
I shall on a switch that will be connected with a node mcu transmitter. Please help with code.
Hi, great video. Two questions:
1- is it possible to use a bigger sensor inside the soil?
2- Is it possible to measure pH?
What's the practical range of communication?
Thx for the great ideas.
if 20 Lora on the field, can 1 esp8266 in receiver handle it, then figured it at same time using blynk?
thx for sharing
i am curious
have you done any range test for these lora modules? and how far?
sir may i ask what is the red pcb board interfaced with the arduino nano on the transmitter side??? thanks
Another great video on the Reyax modules. Can I use the same setup and app to control a valve to water the plants when the moisture level gets too low? Or will I have to make the watering system a separate setup?
you can.use the same setup
these are transceiver modules. in this.project i did only.the.monitoring
you can make this two way
Thank you! I would like to use the same blynk app, and have a on/off button that controls a ball valve that's connected to the same arduino as the moisture sensor. Will I have to use an interrupt in the code to control the ball valve at the same time the arduino is reading the sensor values?
sir i have a problem....
There was some delay between data transfer to receiver its not realtime..i mean when i turn my potential after little bit delay to receive that value to receiveer side..how to solve that problem ..
Thank you very much
there are delays. reduce the delays.
sorry Sir..i trying with somany adjustment..but problem still same...
Sir how make same smart irrigation system with ra02 module or other lora modules
What changes we have to do in project
Will this app work without internet connection?
so you have to put the receiver (nodemcu) where theres internet to be able to connect to blynk?
so just to clarify the arduino sends sensor data through lora then the nodemcu receives data through lora and sends it to the phone through internet via wifi?
tq for sharing this video....can i use as reference?...
yes sure
is it possible to have multiple transmitter and only one receiver using this setup ? thank you for this awesome video :)
ya sure you can do it. you can make a complete network
i will explain this thing.
@@ElectroniClinic Thank you very much, looking forward for your next video about this :)
@@ElectroniClinic please do that~
@@ElectroniClinic
we are waiting for that video in which you will be explained about it
Bro are you from Pakistan?
yes Ajai
harmanım baba nerde çarşafım
Give me link to buy this PCB from you
its available for free.
Electronic Clinic I not understand.u mean u will give it to me in free ??
check link in the description. you can download the pcb board gerber files or you can place an order on the pcbway official website. i have already shared all the links.
Electronic Clinic I don't want lot of PCBs.i want only 1. So sell me one PCB you.i will pay for it.