2021 Toyota Corolla Steering Angle Sensor faults C052646 and C052696

This video also includes the following
C052646 Steering angle sensor module calibration/parameter memory failure
C052696 Steering angle sensor module component internal failure
How to test Toyota steering angle sensor
Steering angle sensor part number 8924b-50010
Steering angle sensor part number 89245-50060
Steering angle sensor part number 89245-50040
How to remove and replace Toyota corolla steering angle sensor
How to remove Toyota corolla drive side air bag
How to calibrate Toyota corolla steering angle sensor
+++Our Facebook Page+++
/ dallasautodiag
**Our website**
dallasautodiag...
^^^Donations are received on the link bellow^^^
www.paypal.com...

[@DarlinEstGaming]

This video saved me a trip to the dealer. Checked with a $50 OBD2 scanner from Amazon and my angle value wasn’t changing when I moved the wheel. Found a replacement on eBay and fixed it myself 🙏🏼🙏🏼👏thank you so much don’t know if you will ready this by this time

[@hnd2893]

Thanks, nice methods. I just shared your video on the DN (Diagnostic Network) and the person requesting help got a fix

[@oldspice-lario]

As a technician I can say this sensors is a electronical and operated only by computer inside.
MOST important thing to do after replacement to do a Zero calibration Point and make it zero before calibration.
Warning if u don't do it and u overturned a steering in hope it will calibrate by itself - wrong!
the sensor will be white down a code in the EPROM (u can't clean it) - steering angle sensor internal faulty.
To reanimate this Angle sensor u have to Reprogram the EPROM

[@DallasAutoDiag]

im starting to learn how to do so. thanks for the tip

[@advancedleveldiagnostics]

Nice video! Did you check live data to see if the old sensor was reporting any movement, like you did on the new sensor?

[@DallasAutoDiag]

I did. It was dead no response to movement. Also tried SAS calibration but came out with the same error I got when I did calibration to the new sensor.

[@joselmendoza5763]

When I read fault SAS module.no.dtc rav4 2020 but pre collision say angle sensor lost communication c052696

[@robertsteadman4226]

That is a super awesome video. I have changed sensor also now I will try 9mph. Thanks A+

[@DallasAutoDiag]

Good luck

[@eddie2841]

This video is very helpful, great job man thank you

[@DallasAutoDiag]

Thanks

[@alrifainidal]

That was really a good one. nice fix brother ( incorrect part number it was ok )

[@DallasAutoDiag]

Thanks bro

[@pleirbag]

Just a heads up I have a 23 Corolla that I just finished repairs on I had similar codes using tech stream Toyota software trying to recalibrate everything and it still returned same as yours. Code finally cleared and took calibration after take the battery off for a few minutes.

[@DallasAutoDiag]

Nice. Thanks for the tip. I will try it next time.

[@ItsFreezer-]

Good evening friend, how can I contact you? I have this same problem, I see you are in Dallas, I need to do this same job

[@DallasAutoDiag]

My shop in Kennedale TX. You can reach me via Facebook

[@ebrahimsadeghi5883]

Great as always 👏👏👏👏

[@DallasAutoDiag]

Thanks dude

[@joyfullife8751]

My 2022 Toyota Corolla got same problem after changing speed censors,I need help ,what I need to do brother.
I live in Pittsburgh PA.would you plz give me recommendations where to go to fix in my area ,thank you

[@thetrain7386]

Hello, I have the same problem as you, but the car is also going to the right and I have already aligned it twice. Do you think that after calibrating the sensor I won't have to align it again? Thanks in advance

[@DallasAutoDiag]

I don't think you need to align again after sensor calibration

[@Usmanali-jb5ul]

Very helpfull video🤗

[@DallasAutoDiag]

Thanks

[@nickayivor8432]

Enjoy your weekend with all your family around you,Dallas Auto Diag
My Mentor
👍
INSIGHTFUL. DALLAS AUTO DIAG
from Nick Ayivor from London England UK 🇬🇧 ⏰️ 22:34PM Good Evening

[@DallasAutoDiag]

Hey Nick

[@diydantex6150]

thanks again

[@DallasAutoDiag]

No problem

[@user-sz7uc1fl3y]

how to go? Just in a straight line? Turn the steering wheel? With blinking icons? Good afternoon, tell me please?

[@DallasAutoDiag]

Just straight line. Short not long.

[@bornforparadise7517]

Have you tried to do a steering angle sensor calibration ?!

[@DallasAutoDiag]

Yes I forgot to mention that in the video. I did it same day I got the car. It won't pass just like the same when ai did it after installing the new SAS

[@bornforparadise7517]

@@DallasAutoDiag okay , thanks for sharing the video with us

[@danman9017]

good job

[@DallasAutoDiag]

Thanks Dan

[@Usmanali-jb5ul]

Where you got it wiring diagram?

[@DallasAutoDiag]

Alldata.com

[@sish_khan5198]

Nice supper

[@DallasAutoDiag]

Thanks

[@aymenmohamed1134]

👍🏻👍🏻👍🏻

[@DallasAutoDiag]

Thanks

[@user-og4gm1rw6y]

Hi

[@DallasAutoDiag]

Hellow