VSC LIGHT, VSC LIGHT OFF, ABS LIGHT| '01 LEXUS GS430 [1/4]
Вставка
- Опубліковано 7 лют 2025
- PART 2: • 009: THE SOLUTION TO F...
PART 3: • 010: DIAGNOSING ABS VS...
PART 4: • 011: FINALLY FIXED ALL...
Hello everyone, so this can be a possible solution to fix this annoying problem in toyotas/Lexus's. Unfortunately, i found out a couple of days that this method didn't even work. But maybe it will work for you guys! So here's how you do it. Hope you enjoy!
Here's a more in-depth link: www.clublexus....
Had to reupload this video so video is old!
Thanks for the video! I have a 3rd gen GS430 and my brakes hardly worked (no assist) after replacing front rotors & pads, and all those lights were on. This is how I fixed it:
1) Put car in accessory mode. To do this on this car you must shift to neutral while engine is running and then turn off car. Use the shift lock to move shifter to Park (P). You may have to hit start button one more time to enable accessory mode.
2) Insert paper clip jumper between slot 4 & 13
3) Lightly pump brakes quickly at least 4 times (I did 8 just to be sure) within 5 seconds. You don't have to push it to floor each time, just enough pressure that it would activate the rear brake light.
4) Shut down car and remove clip.
5) Do a regular start and lights should be gone and brakes should be working!
In the first step u had the car in accessory mode or you turned it on then shifted to N
got to 3:00 to get to the part where he talks about the issue
if i was a viewer, you'd be my life savior. Will do better to take less.
good video one other thing that worked for me was disconnecting the battery by loosing and removing the negative terminal for 30 min that reset everything perfectly. hope it also helps
If only every car problem was like that lol. Thanks Frank!
A simpler approach. Black electrical tape over the ABS light. Works every time.
lol! if only that was life's solution to everything right?
The beeping you can’t get rid of
@@brandobee2264 The brakes will also shudder.
Same thing 😂
Yes that what im doing atm. 😂😂😂 im out of solution how to fix this
Im wandering if the yaw sensor is whats tolling me in my aristo. The abs motor and accumulator work but i keep getting a abs light and buzzer. I did a tcs amd vsc delete years ago so maybe a wire is grounding put also. Thanks for the video.
Love the pic in the dash gauges I have did that from like the 90s when I was in high school glad to see some one else doing that to ! And I hope this works on my 4 runner I put a lift kit under it and bigger tires I’ve tryed the others I’m gonna try this and I messed with the alignment on my 4Runner we’re i lifted it !
My GS wont work eventho i did this. My vsc still on warning light. Any other idea
How to pix it ls400 yr2000 I change alternator and battery! Still draining my battery!
My 98' lexus ls400 currently. I have came to a few conclusions. Based on forums and from my personal experience it is said to be the wheel hub sensor(s) and can be the speeding sensors on the transmission. Also have problems with my PNP) switch.
Will this works on 2004 lexus es330?
Hey hi, I have JDM Toyota Aristo 1998.
This model comes with 2JZ GTE engine.
Ok so in my car I have these problems
1. My VSC and TRC OFF lights are on but no check Engine light. So will this above video method will work on my car?
2. In my car the "ECT PWR" light is always blinking, can you please help me to solve these problem as well. Thanks you.
(I mean blinking when the car is running or ignition is on.)
I unfortunately have never had experience with a JDM 2JZ GTE engine. So i can't give you advice on things i don't know. Your best bet is facebook groups and clublexus forums!
Working on a guy's 2008 Lexus GS 350 all those lights came on and there was no power steering and I basically have to just take a little lost and give him back his car so he can take it to the shop I changed all four wheel bearings all four struts all four wheel speed sensors, rear pads oil pan gasket transmission screen fluid and filter thermostat and coolant flush and cannot get those lights to go off with my scanner.
THATS RIGHT LEXUS GANG GS FOURHUNETS
I checked mine and it doesn’t have the white box to put the paper clip in
I have a 2003 gs300 and my obd plug doesn't have all the pins you have ..any idea what pins to jump ?
Find out which pin-out is "Ts" & "CG." A lot of guides and forum links will tell you for your specific car. Good luck!
I have a ls400 lexus 98 & my vsc light come on after 5 secs of start & cause my car to shift really hard when putting it into rev or drive & has slow speed only when this light is on someone please help
I have no personal experience with LS400’s unfortunately. Try digging deep in clublexus forums or maybe even Facebook groups! Other than that, hopefully the community can help out!
Wheel speed sensors bud
I have a 2006 gx470 . Do I put the paper clip in number 4 on the left and 5 on the right also. Please help
I am not too sure about GX470's to be truthful with you. You can always try looking at clublexus or join Groups on Facebook. They should have plenty of information.
I have a 99 GS300 and your method didn't work for me. Putting in the paper clip did nothing to my lights (the lights did not react, did not blink). Any suggestions on what I should do?
Put a switch
On a 98 holes 3 and 4?
I like it, the tape idea yea !
For Lexus 2006 IS250 I don’t know how to zero out the calibration.
Do you hear a buzzing sounds
I have the same car as yours and the light did flash but still the same
check out my other videos to see what can possible be wrong! It can be a plethora of things!
Well that makes sense
I have the same problem except my brake lights do not work. I changed brake switch, bulbs, still no luck. Thinking shifter interlock solenoid. IDK.
Had that issue in my 01 gs300. A wire going into the fuse box burned out.
Appreciate you giving back Polo! Thank you on my behalf!
If you fixed it then why did it come back on?
Because the problem wasn't fixed! Most likely it was the wheel speed sensor.
I followed you video, but, the lights did not turn off. Does this mean there is a problem with the wheel sensors?
Hey Alex, yes most likely. Be sure to watch my other videos and do a process of elimination.
My car dies and the lights pop up when i turn to much
Nice ride ..i love mine..
Thanks bro! #Teamlexus 👍
My vsc, track off and and check engine lights keep coming back after reset.
I'm not too entirely sure for Rav4's tbh. But it might be related to your check engine light so check that before messing with the vsc and track off light.
it will be a problem with the emission prob o2 sensor as when eml light is lite, it follows with vsc / trck light .
I have a 2007 Toyota RAV4. Same lights isssue.
The ABS speed sensors need to be replaced
Or wheel speed sensor!
Ding ding
If the wheel speed sensor is faulty, will this miscalculate the distance traveled and inaccurately record it on the odometer and trip meter??? Because I swear I didn’t drive THAT much this weekend…
My 2001 ls430 shows erratic signal from the yaw , would changing the abs wheel speed censor fix it ?
Hey there i got a 2002 gs 430 question i got 20 inch wheels my vsc and abs light on and vsc off light on as soon as i turn my car on
did you watch the video? I go step by step on possible problems and solutions
Can VSC traction control and engine lights comes on due to Bad wheel alignment??
If it's for the same car, it would depend. Maybe they stretched the ABS cable/wheel speed sensor cable? You said VSC, Traction control and engine light so it can be something else. Only way to find out is pull the codes my friend or watch the other parts to find out how to check for a bad wheel speed sensor. I've read that it can happen to other cars due to not doing the steering angle reset after alignment, too. 👍
I have a 2002 gs300, I tried it your way, but the lights are still on
Hey, so this is a cheap fix. Typically you want to do this to see if your car's zero point calibration has been recalibrated after an alignment. But if it doesn't work, it might be a wheel speed sensor (typically the front wheel speed sensors). I have different parts within this series that troubleshoots the problem. So be sure to watch that. Hope this helps, Good luck!
MRC Garage yea, I'm thinking it's the wheel speed sensor as well. Thx for replying back. Much appreciated. I'll recheck everything tomorrow when I'm off work. Thanks man
MRC Garage got a quick question. Do I have to check all the speed sensors or jus the sensor on the right?
MRC Garage hey, I've checked both front sensors & they're both good, but the ABS & VSC lights r still on. Pls reply back ASAP!! I need help!!!!!!
It would be best to check both to save you time in the future. Unless you got the code for the right or left then i would just replace the side with the code. Let me know how it goes man! So everyone can just read the comments and you'll be helping out other people too 👍
A simple flashlight would have been very helpful.
How do you turn off tc on 2000 gs300
There's not button?
Would this work on a 2008 GS460 just replaced the abs actuator unit didn't use maching to bleed brakes did it manually brakes good lights still on
Hope you guys are ready for more videos Spring 2018! It'll be a good one! Make sure you like, comment or subscribe. Maybe even all of them!
Thanks
No problem!
I crashed and ever since it’s been on
Same
I have a 2007 Toyota RAV4. Same lights isssue. Will this work? (Anyone??)
Not too sure sorry! Keep looking online!
RidewithMark rude🤣 a no reply would’ve been better. No worries!
@@3printer3 lol! i could be a dick a say take it to toyota =P unfortunately, i am against giving advice that i don't take or have no experience on!
RidewithMark thank for your helpful content. 👍👍
@@3printer3 Always
After you fixed those lights, will they stay off permanently?
yeah, they should stay off permanently unless the problem occurs again. According to some members of club lexus, this is common especially after an alignment and the procedure "point zero calibration" in this video, should be done to get rid of those lights.
How about on a 02 is300?
Unfortunately, i don't have much knowledge on an is300. But you can always find useful information on clublexus and youtube! Best of luck to you.
Why’s the video so long bro
I'd like to make it as informative as possible. This was my first video and i'd prefer to have as much information and potential mess-ups as possible so i can show everyone what to do in those scenarios. Yes it sucks but i'd rather have the people come to the channel and know that they aren't missing out on anything.
changed the gas cap on my lexus gs300 2003 and vsc light on and abs with check engine what could be the other issues
Bro this d.a just happened to me today
Check the other videos! i do a process of elimination!
I have a '99 GS400. So it would be notch 3 on the top and 5 on the bottom?
It's going to be different pin outs depending on the year. Try it out and see if it works if not then you're going to have to find the pin out for your year! If it is a different pin out, be sure to comment here so everyone can see! I'd also like to know as well
MRC Garage I got you. It probably won't work because I believe my sensors are bad. I'll post back when I try it.
Brian Hartman have you tried it out yet. I have the same situation on my 99 GS300
SuperBoogieboi I haven't because my pins are set up way different than in the video. A while back I had my dude hook up a tester and all of my wheel sensors were not working. This probably won't fix my car if I do figure it out, but I will do research and get back to you. What year is your car?
99 GS 300. Thanks these lights not cool at all. I also have check engine light im working on
nice chinito, tankyou
Thanks but i'm not chinese
My car is a 1998 Lexus GS 300 and I was wondering what numbers you would pin for it?
Sorry i don't know if the older year 2GS have the same pinout. Nor do i want to give you the false information. But if you can find out which pinout is the TS & CG wire, those are the ones you want to jump.
THANKS ALOT MAN!!!!!
No problem! Glad to help somehow 👍
@@RidewithMark Hey there i got a 2002 gs 430 question i got 20 inch wheels my vsc and abs light on and vsc off light on?
An abs light will not make your breaks fail man
I have a 98 gs400 mine has been on a year won't go out how do I fix it. It came on after a ball joint repair is the wheel sensor on the hub damaged
Hyttman2015 Tjsmma bruh nine has been on for about the same
Most likely
Could you drive normally like that ?
My car is a Toyota Rav4 sports 2008
Shit works!!! I did it with a stapler
Lol! My man... Glad to be of some help. 👍
And my vsc light it on
Bro you have some big ears