1/87 micro RC / Brekina Porsche 956 - Completed video with making photos.
Вставка
- Опубліковано 5 жов 2024
- 1/87 micro RC / Brekina Porsche 956
It is finally completed.
The base vehicle this time is a 1/87 size Le Mans sports car.
This uses passeri RC kit.
Please refer to the manufacturer's link for details on the kit.
/ @passerirc
The basic parts are as follows.
Receiver DSM2, Servo 1.8g Micro Servo, LED 1005 Microchip LED, passeri RC chassis kit, Battery 80mAh Lipo.
By cutting many place, I was able to lower the vehicle height than the kit.
As a result, the space has narrowed, so the use of the LED board has been omitted, and only the receiver board and ESC board have been used.
Although I had a hard time loading weights, I installed as many weights as possible in a vacant small space to ensure grip.
However, as expected, the full throttle slips and cannot be controlled.
Please register and enjoy watching my videos.↓
www.youtube.co...
Thank you for watching!!
Back when I was a kid we thought 1/25th scale slot cars were cool. Such an advancement is SO AMAZING!!!
Ok boomer
I had HO scale slot car racing set as kid. Simply amazing that it has progressed to a RC system with a servo no less.
If I'd had seen this back in the day surrounded by my Hot Wheel cars my head would have exploded!
WELL DONE...so cool on so many levels
Haha, for sure!
The suspension test looks like he's petting it
They should make races with little RC cars. That would be so much more interesting and would require more skill than those ridiculous ultra fast slot races.
+ TobiAnimados - Like this one here ...Ridiculous ua-cam.com/video/GtwkRd6zHwg/v-deo.html
1/27 mini z racing has been around for a long time. they are roughly the size of a slot car.
Looks new out the box, very impressive
Totally disappointed there is no rear suspension.
Nah, just kidding, amazing build, and runs much faster than I expected.
Rear suspension🥶🤣
Now i understand why my friend got so mad. It's such high detail and such high quality. I stepped on his car and he went absolutely nuts, when i looked down i saw nothing more than plastic mess, apology wasn't enough so i decided to see what he was making such fuss about.. :/
I feel sorry for your friend
If I was your friend I would no longer be your friend.
Lmfaoo 😂😂😂
Tell ur frnd he shuddnt let it lay round then lol..its so small and fragile a baby wud squish it hehe 😆
You should buy your friend another one.
señor su trabajo es el tope de la modificación de autos a escala diecast , una verdadera obra de arte
This is based on a 1/87 plastic model.☺️👍
I’m impressed you got working headlights and taillights too!
Absolutely incredible!!!
What a work of art .
Stefan Bellof will loving it...☝️😉
How fast can that go?
Amazing!!! The possibilities for track design in minimal space is endless. Really cool.
ๆ
You my friend are in need of a SLA 3d Printer (fine detail vs. PLA/ABS/Nylon 1.75 fed printers). You have the engineering talent. If you already know CAD then you have a head start , but if not check out FreeCAD, 2 days and you will be building Mark Webber's 919 body shell and chassis.
4:58 i cant imagine that tiny car can be so cool like this
You do exceptional work thank you for sharing.
That amazing...i would love to have something like that
Thank you 😊👍
@@kasky_RC_factory would u sell 1
Sorry.
I fully understand and can see every component except the drive train, where's the little motor in this thing?
Looks like it's encased under the 3d printed base, you can kind of see a silhouette of it when he showed it off
Respect your work
What a work ..!! This is just amazing ....!!!
That's outstanding, I love it!!!! Great work!
Looks so professional! Love it!
OMG! Micro Machines became real!
Very very nice
Thanks😆👍
You are definitely gifted. I'm curious what you do for a living. It seems you got to have pretty steady hands to do detail that small almost like a jeweler or watchmaker but anyway thanks for sharing I'm into RC cars. I have a 5th scale 1/10 scale, I just recently bought a 125th scale Kyosho mini z. And I'm enjoying being able to use it around the house with this social distancing thing going on. But that one that you've built is just on another level keep up the good work.
Thank you very much. I am very happy with your comment.🥰👍
Beautifully done. Congratulations.
Amazing job ! Well done !
Way too cool 💪💪💪💪 thanks for sharing
this is absolutly and totaly awesome!!!
Thanks😊👍
Ma che meravigliaa !
Dude, you're stressing me out, running it on the table top.....haha
Awesome job! I have built 12 HO RC vehicles. It's one thing to build a car like you did, but it's a real challenge to add the lights as you did. I am curious as to what steering servo you used, I haven't seen that one.
Wonder if it would be possible too make a like hotwheels van or similar that's a rather large 1:64th scale vehicle awd (No diffs, just gears leading too both sides + servo for steering & make it drift, no suspension too make it slightly more simple too do.)
It is not difficult to convert a 1/64 size van into a RC with the small parts used for 1/87 RC. Please challenge yourself. However, the parts are a bit expensive.
Well I'm not sure I'd manage too make it awd though too drift similar too say takara tomy drift package nano.
Think I'll stick too my plan of perhaps getting a awd 1:28th scale chassis with 90mm wheelbase for my subaru impreza shelf queen body & a few other mini-z bodies i have towards summer 2020.
Got a mini-z mr01 with a bad board atm. 27 mhz one from iwaver i think in it despite it being a kyosho mini-z lol. (Previous owner must have spilled something on it at some point as it's super glitchy after a small bit of range here in my apartment & in the basement so it just goes full speed suddenly after like 4 meters, despite resoldering the antenna wire & a few tries cleaning the board with chemically clean gasoline & changing crystals too 2 other sets i had it made no difference, even tried two other radios and nothing.)
Can you tell me what motor this kit has? Is it faster than the g55 kit? please respond, thanks!
Maybe the motor is the same. But, the gear ratio is completely different.
Cool
How cute it is
Good speed
a nail trim would help the micro rc aesthetically ;)
Very Nice
Thank you 😆👍
that's was so amazing, good work
Kazuo San! Soooooo cool!
Thank you my friend😆👍👍👍
Awesome!
AMAZING,,,,,,,,,,👍👍👍👍👍
Сама модель Порше классная!
This is so cool
Me encantaría saber más de escala 1/87 🏎️🕹️♥️
Buen video amigo
Saludos desde Perú 🇵🇪👍🏻
It’s Awesome 💙
It's was really good but tire didn't grip so well. if it will fix that would be so nice RC in my view.
Great video! I have a 956 being shipped right now, I cant wait.
Yes👍👍👍 This is a great kit. Please enjoy the production.
Dang, I need a C8 version.
Amazing....👍🏼👍🏼
Omg this is the best Man.
またまたビックリ(◎_◎;) このサイズで外観崩さずに作り込むのがスゴイ！
ありがとうございます😆
かなり改造はしてますが、一応売られているキットを利用してますのでそれ程難しくはないんですよ〜👌
oh my!
Very nice,funny.
que legal!!!!!!!!!!!!!!!!!
Боже мой какая малышка 😍😍😍
Спасибо😊👍
Did you get this from a scalextrics car? The older version not the new scale because I have that exact car in my collection so mabey I can make my own...
MEGA!!!!!
Thank you for watching😊👍
Amazing!!!
Great , friend
Thanks👍
Amazing....I need one of those!!
Thank you 😉
You can buy the kit from my friend.
See the link in the comments section.
in relation to its weight, what would be the possibility of a good friction with a surface
Definitely not easy, but what if you used a sheet of very thin rubber on the table. It's so small you can make your track rubber too for not much money. That would have to help. I want to see it wait at a rail crossing for a 1/87 train, then take off.
One more great video about your amazing builds.
Also I’m glad I’m not the only one who thought about replacing default LiPo wires to something thinner and more flexible. Do you have any tips on handling this procedure? I was afraid to overheat the tiny battery during soldering of new wires.
This time, I replaced the battery cable with a thin one that was removed from the servo. By melting the solder in a short time, it can be replaced without any problems.
However, be aware that lipo batteries are dangerous.
How does it get power to the wheels? Its so cool good job.
this could run on a Hotwheels track so many possibilities with this size.
Yes👍
Or a model railroad. 1/87 is HO scale, the single most common model railroad scale in the US, so there's tons of layouts where this car would feel right at home on provided it didn't get hung up at any point.
I want a diorama to drive these cars.😆 But I don't have the skills to make it myself.😅
@@kasky_RC_factory Yes you do. Model railroad scenery is incredibly easy to create. Follow Everard Junction's myriad of videos and you'll be able to create a landscape these cars will look boss in. And the best part is that you can buy readymade accessories for it since the cars are in HO scale!
My kid wants one of this kind. Is it available for sales please.
where do you know what to put and what you need?? are you a designer??
Oooooooh hey✌🏻✌🏻instand Subscribed!!!!
I also started the nano hobby😂
And loking for some detailed making those tiny cars...
Hahaha...
Coool!!
Respectfull thumbs upp!!!!
Salutations from swiss
This is not the scale 1/87 ( HO). A 1/87 scale Porsche is about 4.5 cm long.
Aa dude loved it
im a new sub had tah shared liked loved this way cool man fun too
Beutiful
*I'LL TAKE YOUR ENTIRE STOCK*
이야~!!
리스펙트합니다
I think model cars 1/18 should come with RC.
Awesome such an artistic hand perfectly done.
could you please tell me which receiver & servo module or light module you used ?
also have done the micro excavator or mobile crane?
could you please post the video of micro excavator in future thanks.
Cute car...but It must be expenssive🤔😄👍
Muito show cara
Thanks👍
Tabletop LeMans series?🤔
Come on man you will scare the shit out of a cockroach.. thumbs up
👍👍👍
that is so cool if you sell em how much
sounds like crying stewie in family guy 😂
Can my pet cricket drive it lol 🦗🚘🏁
OK, I wznt one. PLEASE add a link to purchase in the USA
👍
80mAh.. that is freaking impressive... Impressively little.. but impressive.
That would be 53kAh in scale, or 197kWh... twice that of a tesla
omg!
amazing build.. its DSM?
Yes! Use a Deltang board.
Buying link?
wanna ask about how to make the small gear..
The small gear are not my handmade.
대박 good
Can u make these for people to buy?
My friend making this kit and sells it.☝️☺️
What places did you get that micro race car because I really want one
lovely!!!, do you sell your rc cars?
You can buy kit from my friend. Please contact him. 👍 ua-cam.com/channels/eS6GwNrZcG6dSIJXMW84DQ.html
Did the cat get your tongue?
If only we can do this to Hot Wheels to as well
was this 3d printed? id like to make something similiar do you have the files
Need to play it on a right surface.
Where can I order Passeri RC Kit?
Please ask him directly because it contains the producer's link.👍
How do you charge the battery?
There is a small charge port on the back of the chassis that uses a charger for lithium-ion batteries.