Thank you for this! Almost gave up on this game thinking I was too much of a dummy to play, but this helped. I'm still a dummy, but now I'll figure that out at a later point in the game :D
I almost gave up on this game too! If you have more difficulties just ask me anything. You can also Google the Voices of the Void reddit forum, and fandom pages.
Thank you! I missed that little knob for switching polarity left and right, and the tutorial text wasn't easy to understand. This was greatly appreciated!
Hey thanks, im not a pc gamer so i was worried i was just sol struggling to understand the signal download process but this vid helped me figure it out 😊
I didnt use my phone during it, so it took me the longest time to realise you have to untoggle it at 100 or close to that. I havent fully watched the video, so that's how i downloaded the signal in the tuto. I used linear.
Yes sending the signals by drone isn't very clear and requires lots of controls. Basically you need a drive box, open the box lid, place the drives inside it, close the box lid, place the hash codes on the box lid, and place the box in the center of the ring on the floor of the garage, then hit the buttons on the wall of the garage to call the drone.
Hooooooooooooly crap, THANK YOU!!!! Guys, VERY IMPORTANT TO WATCH THE WHOLE VIDEO FOR THE FREQUENCY KNOBS PART!!! I was trying to figure it out myself while the power kept going out (in the game) & i was getting pissed.....so i cleaned the garage & office area in the game from trash so i can cool down 🤣 saw the whole Step One of the signal part which had me understand it more but i only watched a few seconds of Step Two when i decided to try it on my own. I failed miserably & went back to cleaning in the game to get the points so i can do some upgrades so the power is more stable. Like 6hrs later i just watched the whole Step Two part & felt like a dummy for not watching it all because you explain it soooooooooo well! 😅🤦♀️🤣
@@WaybackGuy it deff has been a lot easier! I was 14 days into the game when i saw the entire video so i restarted the game now carrying the right knowledge lol trying to find the answers online was not existent, so im glad you did a detailed video. BTW, when your disc went flying, i was laughing pretty hard!
I have like 4x more tips but it’s so many that is need to see something the tip would help with to remember but here’s 1: if you want the basement wall to open fall down not climb the ladder at 3:33 am in game (fall is c)
I still dont understand this. Not once has it gradually gone up and stayed up. I've done literally everything the tutorial, and this video says. It just goes up and immediately back down. Its on both settings, polarity and frequency. The closest Ive gotten it is 97.4% on polarity and 77.3% on frequency, and that's by turning it off during one of its little spikes in percentages. As soon as I turn it back on, it shoots back down to zero. The downloading thing only goes up by .1% every two minutes. That's too long. Edit: I watched it again and realized I've been ignoring the filter offset. It all makes sense now... I think.
I've got a buggy mouse whose scroll wheel just goes off the wall whenever i use it. Is there any way to scroll wtihout using it? edit: yeah i probably shouldn't be asking a random youtuber. thanks for the guide, it helped! i'll go ask on the forums or itch comments. 2nd edit; auto hot key had a v1 script lying around from their website that did exactly what i needed it to. if anyone else needs it, it's under the tab on the left called "Script Showcase" just find the one that allows scroll wheel to be toggled with the numerical pad.
What does the Downloading panel say in the bottom right? Both the Download at the bottom and the Detector at the top must reach 100% before you can save signal. The image in the upper right takes a little time to appear while the satellites align. Once the image appears then you can adjust polarity and frequency. It also takes longer to download if some satellites are down and you need to go to them to fix the servers. You could try checking the fandom Signals page here for Unknowns eternitydev-games.fandom.com/wiki/Voices_of_the_Void/Signals
Once the yellow numbers move close to 100% you are good and you need to reduce the offset speed to zero to stop it. Remember you must press and hold E when selecting a knob and while holding E use the mouse scroll wheel to move forward and backward with the offset speed. Negative offset speed will move backward. Positive offset speed will move forward.
@@WaybackGuy i got that part but i failed to put a few more brain cells together to realize the part i failed to pay attention to. This guide worked better than the tut and i deeply appreciate it. After wanting to play since vargskelethor played it the first time ive had it but never played because of this reason. And now i can!
You got to press and hold E to grab the polarity knob then while holding E use the scroll wheel up/down on your mouse to move the numbers up/down until the filter stops.
@@WaybackGuy i was doing that but it just doesnt work for the past 2 weeks and it just doesnt work, im giving up on this game, im so done, im so dissapointed
Did you try switching the Polarity mode? There is another switch to the left that swaps between polarity mode. Only one of the three polarity modes will work and it's random which works each time.
Do you mean on the Playback panel next to the downloading panel. Try using the big scroll bar on the top center of the Playback control panel. Press and hold E on it then use the mouse scroll wheel to move the selection up and down so the signal is highlighted, before pressing the Play button on the panel.
Thank you for this! Almost gave up on this game thinking I was too much of a dummy to play, but this helped. I'm still a dummy, but now I'll figure that out at a later point in the game :D
I almost gave up on this game too! If you have more difficulties just ask me anything. You can also Google the Voices of the Void reddit forum, and fandom pages.
@@WaybackGuy Thanks for the resources! And will do!
Oh no dude it’s not just you. The tutorial is WAAAY too vague and text-heavy
Thank you! I missed that little knob for switching polarity left and right, and the tutorial text wasn't easy to understand. This was greatly appreciated!
I'm happy I could help! There are lots of controls to learn at once but after a bit it becomes routine.
holy life saver, i was so confused about how the downloading works. great explanation, this was exactly what i was looking for.
Bro thank youm why couldn't the game explain this well?
I know right?! It's a fun game it just needs a better tutorial or something that can better ease you into it.
Its cause its text based. Its pretty hard explaining something a video shows you in 3 paragraphs.
Genuinely the most helpful tutorial i’ve seen on this. Thanks dawg
Nice! Glad it was helpful to ya.
Hey thanks, im not a pc gamer so i was worried i was just sol struggling to understand the signal download process but this vid helped me figure it out 😊
That's great I'm glad it helped!
Thank you so much I don't think I would be able to figure it out myself, got it from first try thanks to your tutorial
Glad I could help. If you run into any issues just drop a comment here. Happy gaming!
Thank you!!!! This video made it all make sense. People like you are hidden gems!❤
So happy it helped!
Thanks so much for the guide man, this was a real struggle until i found this video, awesome work!
Glad to help! I think the game developers must be too busy with the main game to improve the tutorial level.
I can't really describe it but you talk a lot like a teacher, it's quite nice.
my head caught fire, thanksfully you had the fire extinguisher! thanks!!!
You're the only helpful Damn person on the internet... Thanks you❤❤❤❤
Ripping my hair out.
Thanks for kind words Funnyfish66. Glad to help ya!
Спасибо чувак,на иностранном языке понял лучше,чем на родном,продолжай в том же духе!
thank you! i really want to play this game but the tutorial didnt explain the polarity right, now i can finally play lol
was legit going to start crying because i felt so dumb thankyou SO MUCH
This game was too complex for my monkey brain, this helped a lot even 8 months later. Thank you very much for this video!
I didnt use my phone during it, so it took me the longest time to realise you have to untoggle it at 100 or close to that. I havent fully watched the video, so that's how i downloaded the signal in the tuto. I used linear.
Holy crap thank you. I was so lost.
This tutorial made me feel qualified to apply for IGN.
Cheers for explaining the calibration. :D
why wasn't I told that I had to use the mouse wheel? Did I miss it? I've spent like 20 minutes just smashing "E" expecting anything to happen
Yeah I think good tutorials are one issue some indie devs overlook. I'm happy you got it now!
this is way better than a 5 minute explanation of the same thing because this tutorial goes way into detal
thanks for this man 👍
Glad my tutorial helped. Happy gaming!
Thank you, this helped my smooth brain finally get it.
thank you so much. I'm sure I'm gonna drop the game for the horror part but was almost dropping it for the terrible filters explanation
I nearly gave up on this game myself. It's frustrating in the beginning for sure.
@@WaybackGuy at least, thanks to this video, today i got beyond the tutorial. Even if i couldn't get more than one signal on the first day 🤷🏻♂️
me: 100% 100%
computer download signal: low, low.
me: pouring bucket of water on computer.
Thank you for the tutorial! I was 40ish minutes deep in a stream when I had to look up how to play the game 😂
Glad to help! If you have any other questions just ask. I'm about 3/4 through the game in my playthrough.
Thank you. I was stuck in the second step for a long time.
Dude you deserve 100k subscribers
thanks!!! the in game tutorial was a bit confusing lol
Thank you so much i was stuck on finding the polarity
Thank you! I was so confused for so long lol
thank you so much. i know this videos on the old version but most is still the same
Nice guide! The next weird part is sending the signal off in the drone, maybe you could make a video on that?
Yes sending the signals by drone isn't very clear and requires lots of controls. Basically you need a drive box, open the box lid, place the drives inside it, close the box lid, place the hash codes on the box lid, and place the box in the center of the ring on the floor of the garage, then hit the buttons on the wall of the garage to call the drone.
@ Yeah, I found that out by trial and error on Day 5 of Story. Nice to get a response tho!
Thanks bro I couldn’t for the life of me figure machine out
hey man, great vid really helpful just subbed :)
Thanks for the kind words! Glad the vid helped.
OH SO YOU NEED PRESS A FREAKING "ENTER" TO PING A SIGNAL?! I did everything right except pressing "enter" part. This is so unintuitive
Yeah the tutorial level needs a lot of work, or at least in game step by step instructions/hints.
Thanks man! Appreciate it
Hooooooooooooly crap, THANK YOU!!!! Guys, VERY IMPORTANT TO WATCH THE WHOLE VIDEO FOR THE FREQUENCY KNOBS PART!!! I was trying to figure it out myself while the power kept going out (in the game) & i was getting pissed.....so i cleaned the garage & office area in the game from trash so i can cool down 🤣 saw the whole Step One of the signal part which had me understand it more but i only watched a few seconds of Step Two when i decided to try it on my own. I failed miserably & went back to cleaning in the game to get the points so i can do some upgrades so the power is more stable. Like 6hrs later i just watched the whole Step Two part & felt like a dummy for not watching it all because you explain it soooooooooo well! 😅🤦♀️🤣
Lots of people have trouble with this part of the game. Once you get past this and it's a lot easier.
@@WaybackGuy it deff has been a lot easier! I was 14 days into the game when i saw the entire video so i restarted the game now carrying the right knowledge lol trying to find the answers online was not existent, so im glad you did a detailed video. BTW, when your disc went flying, i was laughing pretty hard!
Yeah not a lot of info online. I find that's part of the fun and frustration with the game. :)
@@WaybackGuy very true!
Thank you so much! Friend recommended I play this game, and I couldn't figure out this part!
Much appreciated WaybackGuy o7
That's awesome! Let me know if you need help with anything else.
i cant play the thing i dont know why
I WAS TRYING TO DO THIS TUTORIAL BUT AN INVISIBLE ALIEN STARTED THROWING BURGERS AT ME AND NOW ITS ALL OVER MY DESK AND I KEEP FALLING
this means you are a hungry boi
eat something in-game
burger is hallucination, falling is you fainting due to no food
very helpful, thanks
Thanks for this bro
Glad to help!
Damn, this was good
thanks!
really helped me
3:50 THANKS YOU !!!!!
the tutorial explains this terribly, thank you for this video
You're welcome! I thought the tutorial was kinda funny but yes not well designed.
Dammit, I thought they had to be moving lol. Didn't know you could pause the frequency and polarity.
gotta love that 10FPS gameplay
Nice tutorial
Thanks. If you have more tips let me know. This game was a bit confusing in the beginning.
I have like 4x more tips but it’s so many that is need to see something the tip would help with to remember but here’s 1: if you want the basement wall to open fall down not climb the ladder at 3:33 am in game (fall is c)
@@trainshark5213 I'll try that thanks! Any way I would have known to do that? Is it written in the notebook found in the basement?
@@WaybackGuyno
lol@@trainshark5213
Thank you ellis l4d2
Glad I could help! Let me know if you run into any trouble.
Me just throwing trash at the monitor because I can't figure it out
i understand more but i still cant find it
I still dont understand this. Not once has it gradually gone up and stayed up. I've done literally everything the tutorial, and this video says. It just goes up and immediately back down. Its on both settings, polarity and frequency. The closest Ive gotten it is 97.4% on polarity and 77.3% on frequency, and that's by turning it off during one of its little spikes in percentages. As soon as I turn it back on, it shoots back down to zero. The downloading thing only goes up by .1% every two minutes. That's too long.
Edit: I watched it again and realized I've been ignoring the filter offset. It all makes sense now... I think.
So when I do mine it doesn’t stop it just keeps spinning and stays at 0:0 or however it looks
I've got a buggy mouse whose scroll wheel just goes off the wall whenever i use it. Is there any way to scroll wtihout using it?
edit: yeah i probably shouldn't be asking a random youtuber. thanks for the guide, it helped! i'll go ask on the forums or itch comments.
2nd edit; auto hot key had a v1 script lying around from their website that did exactly what i needed it to. if anyone else needs it, it's under the tab on the left called "Script Showcase" just find the one that allows scroll wheel to be toggled with the numerical pad.
Thanks for the AHK tip!
Why my polarity uhh when im on 160.60 it dont give output data
Sometimes i got unknown signal, and i couldn't download it why is that?
What does the Downloading panel say in the bottom right? Both the Download at the bottom and the Detector at the top must reach 100% before you can save signal. The image in the upper right takes a little time to appear while the satellites align. Once the image appears then you can adjust polarity and frequency. It also takes longer to download if some satellites are down and you need to go to them to fix the servers. You could try checking the fandom Signals page here for Unknowns eternitydev-games.fandom.com/wiki/Voices_of_the_Void/Signals
Tutorial man: This button saves it… Why isn’t it saving?
(Not to be taken rude)
The Save button should save the signal to your desktop PC in game. Make sure the signal is highlighted on the Playback screen before hitting save.
even with this tut i still cannot understand how to do it. the output data just flickers numbers and i cannot get it.
Once the yellow numbers move close to 100% you are good and you need to reduce the offset speed to zero to stop it. Remember you must press and hold E when selecting a knob and while holding E use the mouse scroll wheel to move forward and backward with the offset speed. Negative offset speed will move backward. Positive offset speed will move forward.
@@WaybackGuy i got that part but i failed to put a few more brain cells together to realize the part i failed to pay attention to. This guide worked better than the tut and i deeply appreciate it. After wanting to play since vargskelethor played it the first time ive had it but never played because of this reason. And now i can!
bro the polarity filter procent keeps going up and down no matter what i do and i cant do anything
You got to press and hold E to grab the polarity knob then while holding E use the scroll wheel up/down on your mouse to move the numbers up/down until the filter stops.
@@WaybackGuy i was doing that but it just doesnt work for the past 2 weeks and it just doesnt work, im giving up on this game, im so done, im so dissapointed
It should get less jittery the closer you get to equilibrium. If it doesn't then maybe try another version? The last version I played was 0.7.
Did you try switching the Polarity mode? There is another switch to the left that swaps between polarity mode. Only one of the three polarity modes will work and it's random which works each time.
@@WaybackGuy yes i did
when I try to listen to it it says module not found
Do you mean on the Playback panel next to the downloading panel. Try using the big scroll bar on the top center of the Playback control panel. Press and hold E on it then use the mouse scroll wheel to move the selection up and down so the signal is highlighted, before pressing the Play button on the panel.
@@WaybackGuythanks
what is this
Yep, hard game xD
comment tribute
So odd how unfamiliar you seem with everything in a tutorial video...