How To Golf 3 020 Remove Gearbox

Поділитися
Вставка
  • Опубліковано 29 лис 2024

КОМЕНТАРІ • 55

  • @jimmywitton77
    @jimmywitton77 2 роки тому +7

    Brilliant video just helped me remove my GTi box after 10 months of it just being sat there with no idea of what to do you sir are a legend

    • @RestoDesignsnando
      @RestoDesignsnando  2 роки тому +1

      Thank you mate for watching👍🏼 Glad I was able to help 👊🏼

  • @snowflake6916
    @snowflake6916 2 роки тому +4

    Great how to, very underrated channel.

  • @zohaiblughmani5089
    @zohaiblughmani5089 6 місяців тому +1

    Thank you so much, I almost have the transmission out. When replacing the rear main seal, do you have to pre-lubricate it? I have the elring replacement seal for the engine. I also was wondering if the input shaft seals are worth replacing. The larger black one behind the splines of the input shaft.

    • @RestoDesignsnando
      @RestoDesignsnando  6 місяців тому +1

      Yes 100% once the gearbox is out for the low price of them replace both those gearbox input shaft seals. I never have lubed the rear main seal. But doesn't main you can't.

  • @mrjosephDJ
    @mrjosephDJ 2 роки тому +3

    Great video. I love 'How to' videos.

  • @07frbaiz
    @07frbaiz Рік тому +1

    Will this video help me remove the gearbox on my 2006 VW golf Mk5 Fsi with a manual 020 gearbox?

    • @RestoDesignsnando
      @RestoDesignsnando  Рік тому

      In truth I don't know, maybe 70% may be the same, the clutch will be hydraulic not cable, the gear linkage I would think is also different.

  • @BrandonhamonHD
    @BrandonhamonHD 6 місяців тому +1

    What steps are different for the 16v 2.0 ABF GTi engine?

    • @RestoDesignsnando
      @RestoDesignsnando  6 місяців тому

      The selector cables, the clutch slave cylinder, speedo wiring plug, and the angle to remove the gearbox due to the bigger flywheel.

    • @BrandonhamonHD
      @BrandonhamonHD 6 місяців тому

      What angle does it need to be as I’m struggling to get the gearbox off

    • @RestoDesignsnando
      @RestoDesignsnando  6 місяців тому +1

      @@BrandonhamonHD you need drop the engine slightly then with the gearbox loose, clock the gearbox anti clock wise.

  • @paintsilj
    @paintsilj Рік тому +1

    How would this differ from removing Golf-mk3 vr6 2.8 1997 gearbox? Mine was the last edition, September. I believe it's an 020 gearbox.

    • @RestoDesignsnando
      @RestoDesignsnando  Рік тому +1

      The Vr6 uses the 02A gearbox, there are a few differences, that driveshaft flange which hits the back of the block can be unbolted on your gearbox with a 6mm allen key in the centre, oil will leak from it so remove the oil before hand, makes life so much easier. Your 02A has a hydraulic clutch so again makes life easy just unbolt the clutch slave cylinder from the gearbox.

    • @paintsilj
      @paintsilj Рік тому

      @@RestoDesignsnando cheers

  • @anatolec1037
    @anatolec1037 Рік тому +1

    I cannot seem to push the clutch lever down and get the white thingy in place ? Should I push harder ?

    • @RestoDesignsnando
      @RestoDesignsnando  Рік тому

      You may need to press the clutch panel down a few times first and then try again.

  • @LNRGarage
    @LNRGarage Рік тому +1

    Im going to try this, I’ll be back if i encounter any problems✌🏻

  • @BrandonhamonHD
    @BrandonhamonHD 6 місяців тому +1

    Are these steps the exact same for a 96 2 liter GTi?

  • @1dayumay548
    @1dayumay548 Рік тому +1

    can i put a 96 gti 8v gearbox in a 92 gti 8v?? my gearbox just popped and i found a later 96 one, same engine as mine, mine’s a 92 GTI 8v

    • @RestoDesignsnando
      @RestoDesignsnando  Рік тому

      yes it should be plug n play. To be 100% what is the gearbox codes of both boxes?

  • @PSilva-fs6uo
    @PSilva-fs6uo 2 роки тому +2

    Thanks Bro u are a specialist on that ,when I need my one replaced I know where to go 😉

  • @shakeit6898
    @shakeit6898 4 місяці тому +1

    Is it the same gearbox with 1.4 aex engine?

    • @RestoDesignsnando
      @RestoDesignsnando  4 місяці тому

      I'm not 100% is your starter motor at the front or the back?

    • @shakeit6898
      @shakeit6898 4 місяці тому +1

      @@RestoDesignsnando front

    • @RestoDesignsnando
      @RestoDesignsnando  4 місяці тому +1

      @@shakeit6898 ok then yes it has the same 020 gearbox.

    • @shakeit6898
      @shakeit6898 4 місяці тому

      @@RestoDesignsnando thank you

  • @CarlosFerreira-lb5fu
    @CarlosFerreira-lb5fu 2 роки тому +1

    Nice work! Is the gearbox very heavy ?

  • @aklilmehdi3801
    @aklilmehdi3801 Рік тому

    هل علبة سرعة seat cordoba صالحة لسيارة جولف 2 وسريعة ام سيئة

    • @RestoDesignsnando
      @RestoDesignsnando  Рік тому

      نعم يمكن أن يكون ، ما هو رمز علبة التروس "Seat Cordoba"؟

    • @aklilmehdi3801
      @aklilmehdi3801 Рік тому

      @@RestoDesignsnando cod boit vitesse CJF

    • @aklilmehdi3801
      @aklilmehdi3801 Рік тому

      رمز علبة السرعة CJF محرك 1.6 / 110 حصلن

  • @LOLONO666
    @LOLONO666 2 роки тому +1

    can we reinstall the clutch cable without the white strap on ? it's been removed on mine

    • @RestoDesignsnando
      @RestoDesignsnando  2 роки тому +1

      It can be done with a little bit of luck, otherwise get a load of zip ties on it 👍🏼

    • @LOLONO666
      @LOLONO666 2 роки тому +1

      @@RestoDesignsnando is it supposed to be self adjusted because some people say it's not,i have the gti 1998

    • @RestoDesignsnando
      @RestoDesignsnando  2 роки тому +1

      @@LOLONO666 Yes you may have a an adjustable type.

  • @MaxUlf-e1k
    @MaxUlf-e1k Рік тому +1

    Great tips

  • @armanmujezinovic9335
    @armanmujezinovic9335 Рік тому +1

    Which model has same gear ratio as golf 3 gti?

    • @RestoDesignsnando
      @RestoDesignsnando  Рік тому

      The car Golf mk3.5 cab has the same engine/gearbox as the mk3 gti, off the top of my head there are a few other 020 gearboxs with near the same ratios but have 90mm driveshaft flanges and the smaller input shaft which means 190mm clutch instead of the mk3 GTI 210mm clutch.

  • @ForexMoneyandCarsFMC
    @ForexMoneyandCarsFMC Рік тому

    Please update the video. ❤

  • @tony817ification
    @tony817ification Рік тому +1

    Got mine all unbolted but I can’t wiggle it out for the life of me seems stuck on that bottom mount and wheel well🤦‍♂️😓

    • @RestoDesignsnando
      @RestoDesignsnando  Рік тому +3

      OK you need to lower the motor slightly so it clears the chassis leg.

    • @tony817ification
      @tony817ification Рік тому +2

      Dang a yr later and still replying your amazing thanks for the video!🙏

    • @RestoDesignsnando
      @RestoDesignsnando  Рік тому +1

      @@tony817ification 👍🏼

  • @retrobauty90s64
    @retrobauty90s64 2 роки тому +1

    fenkiu camarada

  • @КонстантинГлыбин-е7ф
    @КонстантинГлыбин-е7ф 10 місяців тому +1

    👍👍👍👍👍🤝🤝🤝🤝