Vegeta Dragon Ball 3D Print Timelapse (Octolapse Ender 3)

Follow:
linktr.ee/that...
Instagram: / thatlittlemachine
TikTok: / thatlittlemachine
The Prince of All Saiyans! My favorite Dragon Ball character. This print required allot of support which was not fun to remove. I also added more effect to the timelapse video using Davinci Resolve. Enjoy!
Model:
-Majin Vegeta (16h 58m, 96g): www.cgtrader.c...
Music:
Leonell Cassio - A Magical Journey Through Space

[@nitrocell9287]

That's one buff Troll

[@miserablysane420]

I'm currently 2 hours into printing this one myself. Fingers crossed awesome job btw

[@thatlittlemachine6760]

Awesome! Let me know how it turns out!

[@JEFX88]

What’s the cost to produce one this size?

[@catrawarrior3429]

Hi do you have the STL file for this model??

[@sunnyz5499]

Vegeta!! At what percentage fo you like your 3d model?
ITS OVER 9000%

[@thatlittlemachine6760]

hahaha

[@jamesbee3087]

Dope! Where did you get the filament guide? I like and I want one. Upgrading my Ender 3 makes make Bee happy man.

[@thatlittlemachine6760]

Filament guide from thingiverse. I switched over to bearings.

[@GeejayBathan]

Do you have any video with regards smooth printing and setting that you use here?? Thank you.. looking forward to this

[@dragonballkollektion7149]

Woooow, this looks verry nice🔥

[@thatlittlemachine6760]

Thanks!

[@dragonballkollektion7149]

@@thatlittlemachine6760 pls make another dragonball 3d Figur/statue

[@andresf9463]

Can you share the cura settings that you used for this model? By the way amazing job man!!!

[@thatlittlemachine6760]

It’s pretty much Cura default settings with tree supports

[@carlogordillo9222]

@@thatlittlemachine6760 tree supports... thnxs a lot i was having problems printing his chin

[@catrawarrior3429]

What nozzle size did you used?

[@lolyouwontfindme6070]

Did you do any specific settings in Cura?? The only one I can think of is enabling supports for the figure but that’s about it, did you do anything else?

[@thatlittlemachine6760]

Tree Supports

[@lucaberna4523]

Amazing! Which slicer you use?

[@thatlittlemachine6760]

CURA

[@jasdeepsingh7828]

Can you pls tell me. What setting you used for support

[@BWTECH0521]

this is awesome! May I ask how to filmed this? How did you make the camera follow the top of the print layer?

[@thatlittlemachine6760]

Either Octolapse or adjusting gcode with a camera trigger

[@Toychestph]

what filament you used?

[@bootlegfiguresyt6802]

Is it possible to print that figure with colour?

[@thatlittlemachine6760]

Yes it is possible

[@bootlegfiguresyt6802]

@@thatlittlemachine6760 cool man

[@JasonJordan198]

How long did it take to print?

[@thatlittlemachine6760]

16h

[@notsquartle5893]

How do u get it to have color

[@thatlittlemachine6760]

Different color filament

[@Dixitkushagra175]

I have an Ender 3 too. Is it possible for you to make the gcode available ? I worry that I wont be able to put the supports properly.

[@thatlittlemachine6760]

I'll see if I can find that file. I might have tossed it. I struggle with supports aswell.

[@Dixitkushagra175]

@@thatlittlemachine6760 oh great. I am still new with the printer. Here is my email if you find it [e-mail]

[@thatlittlemachine6760]

sent

[@Dixitkushagra175]

@@thatlittlemachine6760 Thanks !! Will print it and let you know how it goes !!

[@FroxKs]

@@thatlittlemachine6760 could you send it to me too? [e-mail] is my email

[@hispanicchad8393]

Fucking siiiiiiiick bro

[@thatlittlemachine6760]

Thanks!

[@jackmini1217]

what is the technique of time lapse? could you share the code for movement hotend of x axe?

[@thatlittlemachine6760]

I use octolapse. Each layer the nozzle moves to the same position you choose and the camera takes a picture.

[@Ossii365]

I love Vegeta! Can I get one please ??

[@thatlittlemachine6760]

You can have as many as you'd like if you have a 3d printer :)

[@Ossii365]

@@thatlittlemachine6760 print for me and I will buy a few bro ;)

[@squintyharpygaming8575]

How long did it take to print and what layer height did you do?

[@thatlittlemachine6760]

Around 17 hours. Can't remember the layer height but I maybe .12 - .16

[@mrebsawy]

How it works?

[@BrittleTeaLeaf]

Amazing

[@thatlittlemachine6760]

Thanks

[@pink.sensei8842]

Where can I find the model?

[@thatlittlemachine6760]

link on description

[@alejandrorodriguez6437]

it looks amazing!!
what camera did you use
?

[@thatlittlemachine6760]

I'm using Logitech C922

[@Vladlabs]

sweet!

[@thatlittlemachine6760]

Thanks!

[@chrisquirart7936]

How much do you spend on material

[@thatlittlemachine6760]

PLA spools are about $20

[@luiseduardojatarmontano1983]

what is this kind of support you used?

[@thatlittlemachine6760]

tree supports

[@Alexis-yq8ig]

I am 3 hours into printing goku but im scared because i did it with no support i feel itll fall when is half way done

[@thatlittlemachine6760]

Did the design require supports? The Goku that I printed definitely needed supports. Good luck!

[@Alexis-yq8ig]

Is already on the waist i feel like for the arms it will 😭its going to be ruined

[@thatlittlemachine6760]

I've done prints where I forgot to add supports. Sucks but you learn :)

[@xBuFu195]

Very nice, Can you make one for me? 😅
Greetings from Germany

[@thatlittlemachine6760]

Hi!

[@salveterraqueos]

Did u use PLA or ABS?

[@thatlittlemachine6760]

PLA

[@PabzRoz]

waaaaaaaaaay too much support lol you should do custom supports and not use the ones automatically generated from your slicer. 80% of those supports are completely unnecessary. literally saves hours on prints and makes them so much cleaner.

[@thatlittlemachine6760]

Tree Supports the way to go :)