Nice! I did this mod last week. FYI, drilling the right size hole lets the mount nipples pass through the side flares. Then there is no gap behind the mounts. Either way, having a cup holder is awesome! 😀
Just bought a brand new RXTX this was the video I needed! Answered my question about being able to use the front rod holders with the speakers installed. May have to use the cupholder now too lol hugeeee Thank You!!! : )
Nice! You are going to love it. I need to make a correction to the video to use the bit size as instructed by BRP to make the holes. This will allow the plastic to insert through the hole and mount sit flush against the ski.
Thanks for the video. Always pleased when you do something first so we don't make mistakes! I didn't get these as I thought the left hand one would block the speaker controls and from the look of your video, it does... right ? You just rely on the phone/device controls ?
Old thread but it looks like the left cup holder pretty much covers the speaker controls. Is that true? I'm about to do the install but second guessing the left side.
Awesome Video! My May pre order 300 Limited comes in at the end of the month and I definitely have to get this mod! I was about to ask how well it holds the cups in but the brutal cup holder test at the end of your video proves that! HAHA!!
Here’s a tip or 2 #1. Your socket has a concave in it made for bigger bolt or nut heads so if y’all have this problem I suggest that you either cut or grind it off so that it no longer has the concave #2. If y’all are tired of paying bunches of $$ for the push pin plugs on y’alls stuff jet skis, SXSs and 4-wheelers Walmart sells them on-line just look under plastic push pins for way less than buying from the dealership
Hi how are you?, I have a gtx 230 2024 i want to install the cup holder but i go on the instruction website and i can't see the paper you have that you cut out do you know by any chance where i can find that paper because i dont have it neither can i find it anywhere .
you will find out to buy plastic bottles with lids,,, i had a can mountain dew all over after a ruff short ride now all i bring on vessel is anything that fits in and has a lid LOL I have an 2019 FISHPRO with both L/R front fishing/cup holder's I got 2 months a go
@@AlveanAzurin Ahh Okay. Cool. I accidentally stumbled onto your channel cause you know the UA-cam Algorithm thought that my searching, Which does not or ever did involve jet skis, felt that I needed it. Well, your channel is pretty awesome and I have been binging all of you videos...lol. I was especially hooked on you trip to Bimini. The whole "Adventure" aspect that you add to PWCs has peaked my curiosity. Bravo
Nope, then you have to lift the front every Time you want a sip then shut it back again. Super convenient to have a spot to put the drink of your stopped somewhere or idling
Nice! I did this mod last week.
FYI, drilling the right size hole lets the mount nipples pass through the side flares. Then there is no gap behind the mounts.
Either way, having a cup holder is awesome! 😀
Well dang. I didn’t really notice a gap. I will have to check. Lol. But yes the cup holder is definitely awesome.
Thanks btw. I updated the info on the details of video.
I Love the way you toss things around. Love your installation videos!!!!!!!
Just bought a brand new RXTX this was the video I needed! Answered my question about being able to use the front rod holders with the speakers installed. May have to use the cupholder now too lol hugeeee Thank You!!! : )
Thank you. Glad you found the video helpful.
Solid and clear install video yet again. Thank you love!
Great Video - instructions call for a 3/8" bit which I know you updated - as the mounting points should seat flush along the plastic (no gaps)
Great timing, mine just arrived in the mail & I'm installing it this Saturday.
Nice! You are going to love it. I need to make a correction to the video to use the bit size as instructed by BRP to make the holes. This will allow the plastic to insert through the hole and mount sit flush against the ski.
@@AlveanAzurin thanks. Should be OK, we use metric in Australia 😉
Nice explanation.
I wish they came up with one for the trixx 3up
Thanks for the video. Always pleased when you do something first so we don't make mistakes! I didn't get these as I thought the left hand one would block the speaker controls and from the look of your video, it does... right ? You just rely on the phone/device controls ?
If your getting slippage use a 12 pt socket it has more contact points
great to see new stuff!
Nice work! Thanks.
Thanks for another amazing video!
Old thread but it looks like the left cup holder pretty much covers the speaker controls. Is that true? I'm about to do the install but second guessing the left side.
What did you end up doing? I’m with the same doubt. Already bought it.
@@marcosmicael4153 only installed the right side and returned the left side bracket.
Good job.
Lower piece is for rod holder, so if you need only cup holder, you need to attach only upper piece. - Fishpro user
I may not fish but have been using it for umbrellas, flags, and camera sticks. lol
@@AlveanAzurin such a good idea !!!!!
@@AlveanAzurinany picture holding an umbrella?
🇨🇵🗼..j adore tes vidéos.💙
Hey, love you videos!
By the way, quick question..
How does the GTX cover fit after this install?
Fits just fine. No issues
Awesome Video! My May pre order 300 Limited comes in at the end of the month and I definitely have to get this mod! I was about to ask how well it holds the cups in but the brutal cup holder test at the end of your video proves that! HAHA!!
Here’s a tip or 2 #1. Your socket has a concave in it made for bigger bolt or nut heads so if y’all have this problem I suggest that you either cut or grind it off so that it no longer has the concave #2. If y’all are tired of paying bunches of $$ for the push pin plugs on y’alls stuff jet skis, SXSs and 4-wheelers Walmart sells them on-line just look under plastic push pins for way less than buying from the dealership
Hi how are you?, I have a gtx 230 2024 i want to install the cup holder but i go on the instruction website and i can't see the paper you have that you cut out do you know by any chance where i can find that paper because i dont have it neither can i find it anywhere .
this is nice. wonder if they make this for yamaha waverunners?
will the rod holder fit? just looks like the speakers will be in the way
Yes it definitely does. I just didn’t have it during the time of installation but did use it while I was in Florida.
What is the bottom piece below the cupholder for?
Good evening, congratulations for the video, can you send me the link to print this template?
You can find the template on www.instructions.BRP.com
What was the bottom bracket for ? I didn’t see any use for it when the cup holder was mounted
Great video . What is the lower mount used for?
It’s for the Fishing Rod holder. I didn’t have it in time for the installation video. Works great as a Flag, umbrella and selfie stick also.
@@AlveanAzurin great idea to hold the selfie stick!
Ordered... left, right . one cup holder and two rod holders. Thank you
awesome videos. do you do your own maintenance too? thanks
Yes I do, Standard oil changes and spark plugs. These newer skis don’t need much maintenance.
Try using metric sockets. Usually 8 and 10 mm
Yeah I usually use a 10mm for lots of Seadoo stuff but had standard sockets closest to me 🤦♀️😂
Tried to install on my GTR X and didn’t work.
It’s a different bracket. You need to select the one for your model.
I guess you won’t be able to install rod holders because the speakers are in the way?
The rod holders fit just fine.
you will find out to buy plastic bottles with lids,,, i had a can mountain dew all over after a ruff short ride now all i bring on vessel is anything that fits in and has a lid LOL I have an 2019 FISHPRO with both L/R front fishing/cup holder's I got 2 months a go
Yeah no cans and also using a good tumbler that has good seals are great.
What was the point of the smaller bracket on the bottom?
The mount for the fishing rod 🎣 or umbrella or flag holder
@@AlveanAzurin Ahh Okay. Cool. I accidentally stumbled onto your channel cause you know the UA-cam Algorithm thought that my searching, Which does not or ever did involve jet skis, felt that I needed it. Well, your channel is pretty awesome and I have been binging all of you videos...lol. I was especially hooked on you trip to Bimini. The whole "Adventure" aspect that you add to PWCs has peaked my curiosity. Bravo
@@Hossman757 way to go Algorithm!!! Super stoked you stumbled on my channel and glad you enjoy it!
Where is Kingsley’s bowl holder?
🤔…. Wonder if I can attach one 😂
Just put the cup inside the trunk or cooler and save the money
Nope, then you have to lift the front every Time you want a sip then shut it back again. Super convenient to have a spot to put the drink of your stopped somewhere or idling
Is there a link to order thru you 🤔
No unfortunately I don’t have one.
Hi what is the parts number let us know or the link thx
Part numbers are in the video on the boxes. I point them out.
First! lol