I was SO WRONG About Ikea Tradfri !!

Поділитися
Вставка
  • Опубліковано 16 чер 2024
  • Outdoor motion sensors actually exist! Local Smart Home hub's cost £25, Apple Homekit support is a thing, and Zigbee is actually cheap. How did I miss this??
    This video is sponsored by Locket, all opinions are my own.
    Get a Quote for Locket Insurance:
    locket.insure/?...
    Join the Locket Insiders Programme:
    locket.insure/insiders/?...
    Ikea's Tradfri setup is finally good, and the Ikea Smart home range is finally worth talking about. You might think I'm late to the party, but that's because I assumed Tradfri still sucked.... it doesn't. The Ikea tradfri motion sensor is now one of my best pieces of smart home equipment.
    **GET MY HOME ASSISTANT SETUP BELOW**
    As an Amazon Associate I earn from qualifying purchases. By buying through any of the links below I will earn commission at no extra cost to you :)
    BUY THE CONBEE STICK:
    UK: amzn.to/3JOseIr
    US: amzn.to/3sn3KzX
    BUY A RASPBERRY PI (Power supply case and SD card not included so make sure you order them too!):
    UK: amzn.to/3z3kS1J
    US: amzn.to/3hlmuJS
    BUY THE NES CASE (*Be aware that this case has a shielding issue that affects Bluetooth and Zigbee, you can solve this by swapping the USB cables round in a weird way, more info here*: / retroflag_nespi_4_case...
    UK: amzn.to/3lqPJgu
    US: amzn.to/3G3GOeA
    BUY THE KINGSTON SSD DRIVE
    UK: amzn.to/3Pp2ohE
    US: amzn.to/3LrB27p
    =============================
    BUY ME A BEER
    Donate to the channel: paypal.me/PaulHibbert
    Become a monthly contributor on Patreon: / paulhibbert
    ==============================
    OTHER SMART HOME DEVICES I RECOMMEND
    As an Amazon Associate I earn from qualifying purchases. By buying through any of the links below I will earn commission at no extra cost to you :)
    CONBEE STICK (ENABLES ZIGBEE DEVICES TO CONNECT TO HOME ASSISTANT):
    UK: amzn.to/3JOseIr
    US: amzn.to/3sn3KzX
    OUTDOORLED STRIP (REQUIRES TUYA ZIGBEE HUB OR CONBEE STICK AND PI)
    GLOBAL LINK: s.click.aliexpress.com/e/_A8iP4d
    AQARA ZIGBEE MOTION SENSORS AND DOOR SENSORS (REQUIRES AQARA HUB OR CONBEE STICK & PI):
    UK: amzn.to/2VlQ4Hj
    US: amzn.to/2UUXkKM
    AQARA LIGHT BULB E27 (REQUIRES AQARA HUB OR CONBEE STICK & PI):
    UK: amzn.to/3j7xvzx
    US: www.aqara.com/en/smart_light_...
    AQARA LIGHT SWITCH (REQUIRES AQARA HUB OR CONBEE STICK & PI):
    UK: amzn.to/36Mg70c
    US: amzn.to/37WZBeh
    AQARA BATTERY REMOTE LIGHT SWITCH (REQUIRES AQARA HUB OR CONBEE STICK & PI):
    UK: amzn.to/3JH9SsZ
    US: amzn.to/3JKolEC
    TUYA ZIGBEE MOTION SENSORS AND DOOR SENSORS:
    GLOBAL LINK: s.click.aliexpress.com/e/_AfpFfL
    TUYA ZIGBEE CURTAIN TRACK MOTOR:
    GLOBAL LINK: s.click.aliexpress.com/e/_98WNLL
    TUYA BLIND MOTORS
    UK: amzn.to/3LzgPgD
    US: amzn.to/3NqHpu3
    FLIC BUTTONS (SMART BLUETOOTH BUTTONS):
    SINGLE FLIC: flic.io/shop/flic-2-single-pa...
    3 FLICS AND A HUB (starter kit): flic.io/shop/flic2-starter-ki...
    3 FLICS WITHOUT A HUB: flic.io/shop/flic-2-three-pac...
    BUY A RASPBERRY PI HERE (TO HOST HOME ASSISTANT):
    UK: amzn.to/3HmAYUA
    US: amzn.to/3hlmuJS
    BROADLINK RM4 PRO (TO CONTROL INFRARED DEVICES SUCH AS TV & RF DEVICES SUCH AS PROJECTOR SCREENS)
    UK: amzn.to/3NnfRpe
    US: amzn.to/3Nota96
    ZIGBEE PLUG SOCKET (REQUIRES ZIGBEE HUB SUCH AS HUBITAT OR SMARTTHINGS):
    UK: amzn.to/3NjSehv
    US: amzn.to/3Ddm2aI
    REMOTE CONTROL CANDLES
    UK: amzn.to/2YSmAk2
    US: amzn.to/3cj4DPF
    DECORATIVE BULBS FROM SHELLY
    GLOBAL LINK: shop.shelly.cloud/shelly-vint...
    ZIGBEE SPOTLIGHTS & RGB REMOTE
    UK: amzn.to/2GYvbLM
    US: amzn.to/3kwsgru
    ROBOROCAK ROBOVAC
    UK: amzn.to/35HyK0N
    US: amzn.to/35GU9Hk
    MOON LAMP (TUYA SMART LIFE WIFI - NO HUB REQUIRED)
    UK: amzn.to/2Lb0BwP
    US: Unavailable :(
    LIFX BEAM
    UK: amzn.to/3bfknBS
    US: amzn.to/2Wgv7fi
    SOMA SMART BLIND MOTOR:
    www.somasmarthome.com/
    LIFX BULBS AND STRIPS IN THE GYM & DOOR FRAME LIGHT IN THE STUDIO
    UK: amzn.to/3NoDOfL
    US: amzn.to/3qDdS6v
    LOCK COVERS (MARRIAGE SAVERS)
    UK: amzn.to/3wGT0PA
    US: amzn.to/3JKKF0O
    4K HORIZON PRO PROJECTOR IN THE BEDROOM
    UK: amzn.to/3yHXt2I
    US: amzn.to/37zNEbh
    AMAZON ECHO 4TH GENERATION:
    UK: amzn.to/3eaiKZB
    US: amzn.to/3spreBe
    ECHO SHOW 10
    UK: amzn.to/3lSuWBH
    US: amzn.to/39gE9Pf
    Chapters:
    0:00 Intro
    2:08 Ikea tradfri overview
    3:16 Ikea Tradfri compatability
    7:23 Ikea Tradfri motion sensor
    9:30 Ikea Tradfri setup
    12:10 Ikea Tradfri Summary
  • Наука та технологія

КОМЕНТАРІ • 618

  • @paulhibbert
    @paulhibbert  2 роки тому +29

    Happy Saturday everyone! Masasive thank you to my Patrons and to Locket for making today's video possible. Ikea sure weren't going to sponsor me 😂
    Get a Quote for Locket Insurance:
    locket.insure/?
    Join the Locket Insiders Programme:
    locket.insure/insiders/?

    • @abdultuaheb123
      @abdultuaheb123 2 роки тому

      Hi. pual I'm.new to smart home gadgets. I'm renovating my house and what'd to add smart switches and led strip lights in the ceiling and kitchen. how do I go about it, should I buy amazon echo or Google or ikea tradfri. this is getting abit overwhelming and confusing. would appreciate your help.

    • @GamingPill
      @GamingPill 2 роки тому

      Hi, Paul! What is that little device which changes color? 7:29 in the right of the screen. Thanks!

    • @jg535
      @jg535 2 роки тому

      @@GamingPill it’s a JBL Pulse Bluetooth speaker

    • @adamrizla3611
      @adamrizla3611 2 роки тому

      Locket is so good!! Deserves a video by itself IMO

    • @peterdolkens669
      @peterdolkens669 2 роки тому

      You're probably aware of this, but advanced home assistant (or zigbee2mqtt) users can pair motion sensors/remotes/buttons to most lights/etc - it's in the Zigbee spec, and they expose enough advanced features to link it up manually.

  • @SuneKuntz
    @SuneKuntz 2 роки тому +104

    I'm excited to see how much better the new IKEA Dirigera Hub will be. Completely new hub, new app and new way of interacting with your stuff. With built in Thread, Zigbee and Matter compatibility, as well as native out-of-home control I'm looking forward to the new hub

    • @SirHackaL0t.
      @SirHackaL0t. Рік тому +1

      I bought the dirigera hub and a Styrbar switch in the hope to use the switch to control my Aqara window blinds. Not sure if this is possible.

    • @sheena_.
      @sheena_. 11 місяців тому

      The ikea home smart app is very bad it doesnt work

  • @Horwill1985
    @Horwill1985 2 роки тому +10

    Glad your view on the IKEA stuff has improved. I use IKEA and Sonos around my home because the two integrate with scene controls etc. It makes sense for me to keep things simple with as few systems as possible and the IKEA stuff does everything I need including smart blinds. Setup can be a bit buggy but once you get your head around it it all works reliably for me.

  • @martyw2199
    @martyw2199 2 роки тому +1

    Thanks for making Saturday morning very enjoyable. I always look forward to your videos even if I don’t need the thing you are reviewing.

  • @puntoboy_gt
    @puntoboy_gt 2 роки тому +21

    I've had a Philips Hue Outdoor motion sensor (connected directly to Home Assistant) outside for 2 years and hasn't even needed new batteries. It's working great :)

  • @Garconbleu
    @Garconbleu Рік тому

    Your an absolute treasure to watch. Often when you come on during my playlists I perk up and smile. You've just got a great vibe, a wonderful smile, and a ridiculous but very funny sense of humor. This helps with all questions I had.
    Oh and if the wife got lucky, you clearly got blessed. Cheers. 🤩

  • @LeighHart
    @LeighHart 2 роки тому +1

    Thanks Paul, we just moved to Canada leaving behind a ton of smart lighting and, as we are renting for now, didn’t want to go over the top with smart lights but couldn’t resist putting an IKEA bulb in the front porch socket paired with a motion sensor - no more leaving it on all night and forgetting to turn it off in the morning!
    Thanks for the timely video!

  • @techiot
    @techiot 2 роки тому

    You are one of yt channels that am subscribed to, that I like your videos long before it reaches half its length. I like your humor and believe you will pass 500K subscribers for sure. Keep up the great work. Best regards from Greece

  • @CarlRyds
    @CarlRyds 2 роки тому +16

    I’ve had Homekit with IKEA running my smart home for a few years, After a bit of time upstanding the madness of their setup, it’s actually been working really reliably. I can’t wait to see the new hub and App in October

    • @LaggerSVK
      @LaggerSVK Рік тому

      how is your view now? I feel like there is not much new functionality at this moment however I never had the previous hub.

    • @CarlRyds
      @CarlRyds Рік тому +2

      @@LaggerSVK Still working perfectly with the old hub :)

  • @mikeydk
    @mikeydk 2 роки тому +4

    I absolutely love the ikea bulbs I got in my bathroom. I have added them to my circadian lighting system, and they just fade so smooth. Brightness is so high I run them at around 75%, and on top... they were pretty cheap. They completely blow my ledvance light out of the water.

  • @hometechUK
    @hometechUK 2 роки тому +5

    Can't wait for Ikea's new hub in the autumn, it looks like it works way better & connection just works.

    • @nate_river_
      @nate_river_ 2 роки тому +1

      I'll be interested to see if you'll still be able to use it in 'local only' mode. One of the big things that attracted me to the Tradfri setup was that it didn't need my life story to switch a few lights on.

  • @showmethecoolstuff3172
    @showmethecoolstuff3172 2 роки тому +1

    Thanks Paul. I was a bit on the fence about Tradfri but think I will be taking a trip to IKEA now. Big fan of your channel. Keep up the great work mate 👍 Shouting "Tradfri" while thrusting 😂😂

  • @haynes01623
    @haynes01623 2 роки тому

    I love watching your videos very entertaining and learn new things about smart home stuff you always make me chuckle also

  • @nzhook
    @nzhook 2 роки тому

    Your videos get better every week, joy to watch even if we don't have this eye bird place here. Even the ad read is great.

  • @roodynewbie8122
    @roodynewbie8122 2 роки тому +1

    Somehow you've become my favorite youtuber over the last month or 2. I just love your content, info, perspective....you're a pretty cool dude, Paul Hibbert. Cheers!

    • @paulhibbert
      @paulhibbert  2 роки тому +1

      This really brightened my day dude. Thank you! ❤️

    • @kedharnadh
      @kedharnadh 2 роки тому

      @@paulhibbert you are my favourite from years bro
      I wonder why you haven't checked with tuya zigbee hubs?

    • @paulhibbert
      @paulhibbert  2 роки тому +1

      Thanks brother! I've covered the tuya Zigbee hub from Zemismart 😊

    • @kedharnadh
      @kedharnadh 2 роки тому

      @@paulhibbert I might need to ask in a different way
      How does this IKEA zigbee devices work with tuya zigbee hub ?

  • @thedayb4tomorrow
    @thedayb4tomorrow 2 роки тому +3

    The tradfri shortcut button can actually be really powerful as well. With a somewhat recent firmware it supports press, hold, and double tap. I've set it up as the main light switch for most of my rooms with a normal tap toggling the lights (with some HA magic they get toggled on at a time dependent brightness), a long press turning them on dim regardless of the time, and a double press turning them on bright regardless of the time. Has the big advantage compared to the big remote that you will never accidentally press the wrong button, even in the dark, because there only is one 🙂

    • @lwendt220
      @lwendt220 Рік тому +1

      I am working on doing something similar. Are you using node red or something else for the double-tap/hold functionality?

  • @MrMarcD1
    @MrMarcD1 2 роки тому +2

    Hi Paul, you can also pair the ilea remote directly to Philips Hue bulbs as thats how I have my spare room set up.

  • @deemon710
    @deemon710 Рік тому +1

    One of the best tech reviewers I've ever seen. Thanks for the review!

  • @josephj6521
    @josephj6521 2 роки тому

    I will definitely have a look at the IKEA range. I’ll keep my Philips Hue hub and go from there. As for garden lighting, I haven’t found anything better than Philips. Great video. 👍

  • @dankelley9361
    @dankelley9361 2 роки тому

    Great review of the IKEA automation system. Wow, finally an outdoor sensor & cheap too!

  • @ronm6585
    @ronm6585 2 роки тому

    Happy Saturday Paul! Thank you. 👍🏻😊

  • @thedarkknight1971
    @thedarkknight1971 2 роки тому +1

    It's ALWAYS great featuring the very fine Lady Hibbert. Be it for a mutual chat, or for antics galore, and those Disney singalong reactions... PRICELESS! 👌👍 😎🇬🇧

  • @hammersholt
    @hammersholt 2 роки тому

    I really enjoy your videos and they have helped me get started with making my own smart home. I was wondering if you could look into how to make a closet door open automatically. I would like to keep my robovac in a closet and have the door open automatically when it is activated and close again when it has returned to its docking station.

  • @markholmes1158
    @markholmes1158 2 роки тому +7

    Great video. I've been quite happily using an Ikea bulb attached to a Tuya ZigBee hub. The only limitation around Ikea bulbs in the UK is that they're all Edison screw, whereas the UK overwhelmingly uses bayonet fittings for ceiling lights. Sure, you can change them (as I did), but it's a shame the don't doing any Bayonet fittings.

    • @regoat
      @regoat 2 роки тому +1

      I wanted to know if they are working with Toya. Great news

    • @JasperJanssen
      @JasperJanssen 2 роки тому +2

      The problem with the bayonets is the they’re extremely UK-specific (well.. probably plus Ireland, but you know what I mean.) they’re probably on the list to produce at some point, but the range would have to be popular enough to make the volume in *just* the British isles worth it.

    • @danielfielding7473
      @danielfielding7473 2 роки тому +3

      They do one bayonet bulb, a white spectrum one. But I agree, it’s a shame they don’t do the full RGB in bayonet.

  • @mathewtaylor2007
    @mathewtaylor2007 2 роки тому +2

    Great video Paul - are you sure the motion sensor is designed for outdoor use? I can't see anything about that on the ikea product description.

  • @antoniodecrisci2369
    @antoniodecrisci2369 2 роки тому +2

    I got a ikea smart plug for $14 CAD because I needed a router to extend my zigbee network and you know what this thing is actually pretty good!

  • @thespydk
    @thespydk 2 роки тому +2

    You can pair the IKEA remote with HUE bulbs, you just have to pair the remote to the hue bridge first and then the bulbs.

  • @dougfraser2131
    @dougfraser2131 2 роки тому

    I had two Tradfri outlet switches on my Hubitat to provide ZigBee mesh support for a number of battery operated end points. And they worked great, for about a year. One of them just quietly failed, and the other went into constant reboot loops. The little LED would just blink blink blink blink....
    I replaced them with Sengled, hoping those last a little longer.

  • @SpotOnTechNL
    @SpotOnTechNL 2 роки тому

    Your funniest video probably in a little while :)) Can also be the appearance of your better half improved the video..... oh wait, I was trying to give YOU a compliment. So yes, loved the video. Thanks for a good laugh!

  • @veo_
    @veo_ 2 роки тому +2

    You totally just got me. Although I am already subscribed! My Hubitat is so reliable, I set it up two years ago and have literally never had to go back into the administrative interface to adjust anything, so I forget how it works precisely. Is there not a community driver for Hubitat? Don't tell me I have to investigate on my own!

  • @maximilianberbechelov
    @maximilianberbechelov 7 місяців тому

    I know this is an older video, but ... in a new appartment with more rooms than I can count. I was planning on Smart switches everywhere and hue bulbs in the living room (because too expensive otherwise), but now I'm looking into alternatives and IKEA sounds good based on that video. Thanks!

  • @PushingThroughThePain
    @PushingThroughThePain 2 роки тому

    Great video!
    My question is can I skip the Ikea hub and use the Smart Things hub I already have and still get the bulbs to pair to both a motion sensor and a remote?
    Thanks for awesome work!

  • @andrewculverhouse8914
    @andrewculverhouse8914 2 роки тому

    Bought the controller and lights for the pax system I installed into my daughters bedroom. Ohh the ZigBee in deed, however they have ir sensors built in which allow it to see the door. So it doesn't need the ZigBee at all for that to work perfectly.

  • @batacafe
    @batacafe 2 роки тому +10

    The motion sensor CAN control third party devices through Homekit. This is thanks to an Ikea firmware update released Jan. 2021. I'm controlling my Sylvania strip lights with the Ikea motion sensor.

    • @Sarlota
      @Sarlota 2 роки тому

      ooooooh.... exciting!

    • @batacafe
      @batacafe 2 роки тому

      HeyTechi made a video about it:
      ua-cam.com/video/VDDNFcyv_0c/v-deo.html

    • @kittonsplodge
      @kittonsplodge 2 роки тому

      Mmm that’s what I thought but I’ve fought with it for two days now trying to get this to work. The only way I seem to be able to get it into homekit is to pair it with a light or socket or whatever. I can’t seem to get it to add as device on its own. I can SEE it in homekit and apparent,y set up automations with other devices it just never detects motion unless it’s paired with another ikeas device. I’m sure I must be doing something wrong but can’t work out what.

  • @DragonTalkShow
    @DragonTalkShow 2 роки тому +8

    They’ve also got very affordable shades, I’ve just recently installed one and it works great. Setup process was a bit of a bear for me but now that it’s in I have no issues.

    • @paulhibbert
      @paulhibbert  2 роки тому +4

      I was gonna buy one but you can't adjust their size and that out me off a bit when there are cheaper options that I can cut to length.

    • @InfectedByEli
      @InfectedByEli 2 роки тому

      @@paulhibbert You can, but I suggest you get your more handy brother to do it for you 👍👍😁😁
      ua-cam.com/video/PL6LPZZoFlo/v-deo.html

    • @TheMegahafo
      @TheMegahafo 2 роки тому

      @@paulhibbert what are the cheaper options outside blinds control motor mounted on the wall ?

    • @Horwill1985
      @Horwill1985 2 роки тому +1

      You certainly can cut them to length, I have and love mine

    • @shadow.banned
      @shadow.banned 2 роки тому +1

      Not enough sizes. It would be useful if they could allow people to order custom sizes.

  • @doctor49152
    @doctor49152 2 роки тому

    You did get me!! Hahaha!! I had the ikea page open in another window and was looking at their motion sensor..Then my name... I actually looked around the room. Good Job! But I am already subscribed... So jokes on you!! :p

  • @yentl555
    @yentl555 2 роки тому +1

    Paul you can pair a motionsensor and a remote together (and even 2 motionsensors)
    just put the new motion sensor/ remote to the already existing motionsensor/remote and pair it and it wil kopie itself and now you have two remotes/motionsensors to control one lamp and if the existing sensor/remote already has multible light on it they will al work. (and if you have a hub it wil recognize it too) I already use a motionsensor and remote together because it want to dim it without using a phone or my voice and i have 2 motionsensors for my hallwaylight so it wil turn on if im upstairs and downstairs

  • @MrBlackbrabus1
    @MrBlackbrabus1 2 роки тому +2

    You should check out the IKEA smart black out blinds, they're amazing for movie time routines and general wake up, close up times linked to sunrise and sunset times.

    • @theattorney6072
      @theattorney6072 Рік тому

      Unforthunately the blonds sizes are limited. I need 1m40 and there is none.

  • @arunskuviyamphotography5388
    @arunskuviyamphotography5388 2 роки тому

    I must say that more than the Smart home products, I love your unusual style of presentation lol.

  • @muttlyirl
    @muttlyirl 2 роки тому

    Great video Paul. I’m using IKEA bulbs, motion sensor, buttons and sockets all with a sonoff usb dongle and home assistant. Yes yes I know, home assistant and zigbee. Queue the air humping…..
    All jokes aside, great video but I can confirm the pairing process is crap on all of these even with home assistant. How I’ve got it to work is pair a bulb/socket etc first. Then power them off, like kill power to the bulb. Then you can pair the buttons and sensors without issue. You do have to control the bulbs etc using home assistant even if the command is coming from an ikea button or motion sensor.

  • @andresmoerland9806
    @andresmoerland9806 2 роки тому

    One great thing, all Ikea products works with Homey. With OR without the bridge btw ;) Great video!

  • @adamcraig3808
    @adamcraig3808 2 роки тому

    You hundred percent got me last week with Adam, scared the crap out of me 😱

  • @markshaz8691
    @markshaz8691 2 роки тому +1

    Cheers Paul, I like the IKEA stuff also but our local branch never has anything. Great video.

    • @BusinessButlers
      @BusinessButlers 2 роки тому

      My local IKEA is in Leeds, 30 miles away and I have discovered that there is only one IKEA employee there, who knows the fully skinny about their range. I think he is called Adam (maybe he is the Adam, Paul addressed the other week) and if he is not on duty, every other employee knows even less than zero about their entire smart home range. Also, they miss opportunities since their smart home offering resides in the Lighting section and so their roller blinds or example are not there - they are in the curtain/blinds section where the staff naturally know nothing about home automation.

  • @ericg8282
    @ericg8282 2 роки тому +1

    When I've got the Ikea stuff (around 2019) you could: pair the switch to the bulbs as you showed and then pair another switch or motion sensor to the first switch by Holding them together and press the button on the new device.
    Don't own any of it anymore, so can't check if it's still the case.

    • @Megacheez
      @Megacheez 2 роки тому

      i can still do so with remotes today however i dont have the motion sensor so cannot confirm that specifically. One possible snag would be the removal of proper zigbee BIND support from their firmware 1 or 2 versions ago. but definitely worth a try. (dont forget to wake up the switch first before trying to pair them together!)

  • @fp30e
    @fp30e 2 роки тому

    Hi Paul, Very interesting Video. Very informative. Excellent Video.

  • @paulhyland3528
    @paulhyland3528 2 роки тому

    Fantastic i was about to purchase the aqara sensor and try and mount it in a water proof enclosure, think ill be going for this instead ooh the zigbee!

  • @TvistoProPro
    @TvistoProPro Рік тому +1

    Technically, you can pair the motion sensors and buttons to other zigbee devices. Both dual project and do not only direct binding, but also via groups (as you noted later). Most zigbee devices and be bound to a group by ID... If you're using conbee for Z2M, or Tasmota for Z2T. Anything that lets your directly setup a group binding via command line.
    I do have to say, I like the Ikea stuff. I also found Sengled works very similarly, almost like they're made at the same place. (Nah, couldn't be...)

  • @iandixon4078
    @iandixon4078 2 роки тому

    The Controller Devices (Ikea' name is Steering Device ) can be all paired together, the device you want to copy needs it's pairing button pressed first then the second device, watch the LEDs & keep both pressed untill both LEDs go out. Now both Controllers, Remote Sensors will be able to switch the bulbs, like stairwells etc.

  • @luketromans6973
    @luketromans6973 2 роки тому +1

    Really enjoy your stuff,
    Its so good to see smart home stuff from the UK,
    Question, the motion sensor with the light sensor,
    Can it create an action based on the light level to trigger an Alexa Routine?
    Example:
    Light level is less than X, Alexa routine Y triggers
    If not, any ideas on anything that can handle triggering Alexa Routines based on the light in the room?

  • @HowAboutKaran
    @HowAboutKaran Рік тому

    Thanks for the video! Is it possible to set Alexa shortcuts with the button if you have the hub?

  • @Bigglare
    @Bigglare 2 роки тому +1

    Use the hub to bridge to Alexa, google, homekit, homeassistant and do all the automation in it. You can even pair third party devices to your ikea hub and they work with everything but Homekit.

    • @thombaz
      @thombaz Рік тому

      Really amazing for that price.

  • @spaideri
    @spaideri 2 роки тому +2

    I have to comment on this one. I have had Ikea smart home stuff for several years now. I like the cloudlessness of it. But there are few things I hate about it. One is that every time Ikea updates the hub, my HA loses connection to it and goes haywire if I don't ro a integration reload and/or a hub restart (I have a wifi outlet controlling the hub). Also I have not been able to get the buttons and motion sensor to talk to HA if they are connected to the hub. One thing I have waited for a long time is that Ikea would start to include more sensors to their line up. Currently there are no temperature sensors, door sensors, vibration sensors.....etc. But overall after buying about 10 bulbs and bunch of buttons and motion sensors, only one buldb and one dimmer has broken during the past +5 years.

  • @fadydoumit6448
    @fadydoumit6448 Рік тому

    Awesome video! @Paul, can you give us a link to your sunglasses @ 1:36 ? 😄

    • @paulhibbert
      @paulhibbert  Рік тому

      Wish I could! They were from goggles4u, but they don't do them anymore 😫

  • @clellbritt3434
    @clellbritt3434 2 роки тому

    A few years ago I got 2 bulbs and 2 buttons. The bulbs work great and so did the buttons for about 9 months. Then the buttons battery needed replacing. I replaced them, had to reconnect them to my ST hub, and 3 days later they were out of battery again. Added more batteries and same thing. The bulbs still work great, but the buttons are now doing nothing in the garage.

  • @jayhoffman5678
    @jayhoffman5678 2 роки тому +1

    I'm in the process of installing a motion sensor to control an external light and am looking for both motion and dusk-to-dawn functionality in one. You highlighted this on thr IKEA product, but are there any other sensors that have both features? The product descriptions are woefully short on this topic, though I'd think it would be an expected feature, even for indoor lighting (especially with the D2D switched at the sensor like you demonstrated, because I can't seem to build an Alexa routine that will condition the motion sensor trigger on time-of-day).

  • @grahamjones7814
    @grahamjones7814 2 роки тому

    Thanks Paul, do you know how hard it's been to find an outdoor motion sensor! I willl be visiting Ikea tomorrow :-) Thanks again

  • @NurDieSGE13
    @NurDieSGE13 2 роки тому

    Just to mention: The shortcut buttons and super cheap remotes! I use mine with Home assistant and Broadlink and it works like a remote

  • @mitchellpeterson7943
    @mitchellpeterson7943 2 роки тому +1

    Thanks for the information. One product not mentioned was the shortcut button, the single press, single function one. Are we able to pair this directly to the Echo 4 hub, without the Ikea gateway to trigger amazon routines? It would be nice to have a simple button that triggers Alexa routines without having to invest in a hub.

    • @paulhibbert
      @paulhibbert  2 роки тому

      I haven't tried but I very strongly doubt it. To my knowledge there is still no zigbee button that Alexa recognises as a button when paired directly.

  • @patrick71994
    @patrick71994 2 роки тому +11

    Hi Paul, you can use a remote and motion sensor together with a bulb without a hub. But you need to link the remote and motion sensor with each other. Soooo…
    1. Reset everything. Just in case.
    2. Link the remote to the bulb.
    3. Link the motion sensor to the remote. (Not the bulb!)
    Done!
    Ofcourse you can also link the motion sensor to the bulb first and then connect the remote to the motion sensor. Just do it how you want it to do.

    • @paulhibbert
      @paulhibbert  2 роки тому +3

      Oh wow, that's nuts! Thanks for letting me know man!

    • @samueljuuliversen5162
      @samueljuuliversen5162 2 роки тому

      Yeah. Glad they kept that “hidden feature” 😁
      It’s also possible to pair more then one remote to an bulb/sensor. That was even possible this way, before IKEA officially added that function to the hub 😁

    • @Megacheez
      @Megacheez 2 роки тому

      @@paulhibbert dont forget to wake up the remote(press a random button) before trying to link the sensor to it! i have seen many peopel complain they cznt get it to work only for me to come and link them in one go because they forgot tho make sure the remote is awake to recieve the pairing request.

  • @davidcosine
    @davidcosine Рік тому

    The factory resetting of things is a pain when shit changes but it's so cheap even I can afford it. Great reviews I started with you and your reviews 2 years ago or 3 ..

  • @williameduardo7020
    @williameduardo7020 Рік тому +1

    I have phillips hue lights, swiches, and sensors all over my house and it works great!

  • @GCondrey1
    @GCondrey1 Рік тому

    I hope you get a chance to review Ikea's new DIRIGERA Hub and if it integrates with Alexa. Thanks and as always, I enjoy your videos.

  • @MrJixies
    @MrJixies Рік тому +2

    You can pair the remote and the sensor to a light bulb!!! Just keep them both away from the lightbulb(s) say another room. Then hold the pairing button on the remote keep holding it and then hold the pairing button on the sensor both for 10 seconds. Then they are both paired!!!

  • @workhard2belazy
    @workhard2belazy 2 роки тому

    they have some issues with battery life when connected to things other than ikea hub on some of the devices. However, it is most likely a QC issue since only "some" of the device within the same model

  • @ArniVidar
    @ArniVidar 2 роки тому +1

    I actually tried buying a couple IKEA Trådfri things to test if they worked with my Zigbee hub (Nedis/Tuya). The bulbs work just fine, but the dimmer/switch doesn't appear in the app at all. I'm curious how you managed to make it work for you.

  • @markhoekman35
    @markhoekman35 2 роки тому

    @Paul Hibbert Were you able to integrate it into your homeassistant true the zigbee or conbee stick easaly ?

  • @steli25
    @steli25 2 роки тому +1

    Have you tried to pair 2 motion sensors with 1 light?
    This would be useful when the outside light is in the corner and you want to detect motion on both sides of the conner ... like a 270-degree angle.

    • @saminix1
      @saminix1 Рік тому

      I think you could achieve this in HomeKit with automations

  •  2 роки тому

    I'm a newb when it comes to smart homes. But I have a motion sensor paired with a bulb in my hallway since about two years ago, with some cardboard to restrict what the sensor sees. So I can walk through without it reacting (hallway connects every room in this apartment so going to the toilet during the night blinded me before restricting its view). But if I move closer to the door, or come in from the outside, then it lights up and I can see what I'm doing without manually turning the lights on :)
    So I would say its a nice and affordable gateway into smart homes!

    • @paulhibbert
      @paulhibbert  2 роки тому

      Often the simplest solution is actually the most effective! Good work mate. 😊

  • @GregiiFlieger
    @GregiiFlieger 2 роки тому +1

    Paul, how do you do it? How to you get me laughing every darn week? Oh, yea…great review as well…

  • @yoyobah1862
    @yoyobah1862 2 роки тому +8

    11:48 connect a powerbank to the hub then a charger to the powerbank, so any loss of power keeps your hub running, I do the same to my dashcam so it keeps ticking on.

    • @martomaster
      @martomaster 2 роки тому

      Mind blown!

    • @nate_river_
      @nate_river_ 2 роки тому

      That's a clever idea. I might just have to do that.

    • @BusinessButlers
      @BusinessButlers 2 роки тому +4

      And so the hub can switch the lights on and off in a mirror universe whilst the power is off to those same lights in your own home.?

    • @JasperJanssen
      @JasperJanssen 2 роки тому

      Only works with some Powerbanks, not all have the “pass through” power function.

    • @trevhib
      @trevhib 2 роки тому

      Cool, that's like a mini version of a server UPS

  • @stanislavzubal6376
    @stanislavzubal6376 2 роки тому +1

    Hello, I do not know if I am first to tell you, but IKEA lights/sensor/button, are even better, than you described. Yes, you can not pair button and motion sensor to one light at a same time, but, you can pair one, or more buttons to a motion sensor and then pair lights to motion sensor and then motion sensor and all buttons will be able to controle those lights. I have done in it in my parrents kitchen and it works flawlessly :D

  • @chrisfranknotts1
    @chrisfranknotts1 9 місяців тому

    Ayup me duuuuuuuuck!
    Paul, a quick question if I may?
    Are the Tradfri buttons able to trigger Alexa routines without the hub if I connect them directly to my echo gen4?
    Also, any plans to review the new ikea hub? 😊

  • @Balllsy
    @Balllsy 2 роки тому

    Love your videos ,thank you .

  • @markusw4715
    @markusw4715 2 роки тому +2

    I don`t use smart bulbs anymore ( Wife/Kid unfriendly ), but I use their repeaters a lot as all their stuff works flawless with HA.
    Spoiler Alert, the very choosey Aquara Devices can use Ikea repeaters, have probably 6 of them in my house :)
    Hope they do at some point Wall switches etc, they would make a killing with that too.
    Their Smart lamp is great if you want Sonos sound for cheap...just sad that the lamp part is actually not smart :(

  • @a-c-g
    @a-c-g Рік тому

    What is the cool multi colour light / lamp you use in the corner of the video at times?

  • @CaptainDave9000
    @CaptainDave9000 2 роки тому +1

    Hi Paul, have tradfri become better? I had 4 gu10 lights outside in a enclosed lamp. They started dying after 3 months. After replacing them for 3 times I bought 4 hue lights from a marketplace (would have bought innr lights if i had to buy them new) They are 2,5 years old and still going strong. Also had allot of connectivity issues with the tradfri, the range was abismal. So Hue is expensive but more reliable and no1 here in the netherlands uses lifx so you cant get those 2nd hand.
    Motion sensor looks awesome going to try this outside.

    • @nate_river_
      @nate_river_ 2 роки тому

      I had one bad batch when I did my kitchen, but all of them failed inside a year and Ikea didn't bat an eyelid when replacing them. The replacement ones have lasted about 3 years so far.
      Range and reliability is a tough one to quantify out 'in the wild', since there are so many factors involved. I can say for my house that everything's got a lot more stable now than it was 2-3 years ago.

  • @julianfp1952
    @julianfp1952 Рік тому

    How is the brightness particularly of the GU10 bulbs? I currently have dumb GU10s in all of the rooms in my holiday home and would like to convert that to a smart setup as cheaply as possible (I have 38 GU10 bulbs!). My one concern is that my current dumb bulbs are rated on the box as 400 lumens and I already wish they were a bit brighter whereas the IKEA fancy full-colour GU10s that I would like to use in at least a few rooms are rated at only 345 lumens. In your experience Paul is the lumen rating actually a good indication of brightness or does reality sometimes contradict the specs? I know you sometimes test with a light meter so I’m wondering if you’ve ever encountered situations where you’ve compared 2 bulbs that claim the same lumen output but in your testing you found one to be obviously brighter than the other perhaps because some manufacturers are much more conservative with their claims than others.
    I suppose what I should do is bring one of my dumb bulbs home with me, buy a single IKEA bulb and then compare the two at home but I would be interested in any insights that you or others might have.

  • @gathonar
    @gathonar 2 роки тому

    Love your sense of humour

  • @Mister_Samuel_T_Owen
    @Mister_Samuel_T_Owen 2 роки тому

    I hope this becomes the new way of entering an Ikea [0:43]. It goes without saying but I'll say it anyways: Great video as always!

  • @ChrisMak1
    @ChrisMak1 2 роки тому +1

    I haven’t found anything indicating the IKEA motion sensor is waterproof and have been using Hue outdoor ones instead, where have you found this?

  • @martomaster
    @martomaster 2 роки тому +2

    I have 11 IKEA bulbs and 3 IKEA sockets connected to a SmartThings hub for more than a year. Since some time last year they work locally. I also have two IKEA remotes that can control them but they are cloud only. Only problem is the bulbs don't remember their state after a power outage. Otherwise a sturdy cheap system.

    • @JasperJanssen
      @JasperJanssen 2 роки тому +1

      That last is deliberate - I have one of the big panels on my ceiling lighting point in the kitchen, and what it means is that even if it was turned off by the smart side, someone on the conventional power switch can turn it back on (via turning it off and then back on). It makes it possible for these lights to be seamless upgrades to existing lighting setups, but only a *little* less useful to the true smart home - as far as I am concerned this is the right call.

    • @martomaster
      @martomaster 2 роки тому

      @@JasperJanssen Yup. But I've seen people on both sides. I prefer the lights to keep their last state. I understand the need to be able to use a smart bulb as a dumb one. If only there was a protocol/standard for power state "remembrance" everyone adhered to. Imagine having the option to choose with any hub/bulb/platform combination...

  • @markkiely
    @markkiely 2 роки тому

    Hi Paul, Great review as usual. Has anyone got the Ikea switch to run a alexa routine?

    • @paulhibbert
      @paulhibbert  2 роки тому +1

      Broadlink got delayed by amazon with the rollout for this and didn't tell me until After I'd released the video 🙄 they reckon July it will start working.
      To be fair to them though they have apologised and said that anyone who bought this specifically expecting it to work with Alexa routines can have a new free scene switch when the api is finished. My contact said to write to vipsupport@ibroadlink.com
      Hope that helps man, and sorry for the missinformation.

  • @andreassylvan3478
    @andreassylvan3478 Рік тому

    Hi Paul. Did you have a look at the new IKEA Dirigera hub?

  • @tomjones2860
    @tomjones2860 2 роки тому

    Careful! IKEA battery powered Zigbee devices have some hit/miss issues with battery drain problems when used in non-IKEA environments. Smartthings doesn't work... Home Assistant is a little better, but issues there as well.

  • @LocalIT
    @LocalIT Рік тому +1

    Hi, Amazon Alexa can now find the motion sensor and setup routines without it being paired to a bulb. I'm using it as a "house alarm". Even did a video about it.
    Its just a matter of being creative with it. ;)

  • @MJ-1973
    @MJ-1973 Рік тому

    Alright Paul, wonder if you can help. Looking to add an LED light to en-suite and bathroom ,but want to add a motion sensor and create a routine through 'she who shall not be named' so if I go in through the day, it comes on full brightness, but if I go o through the night, it comes on 10-20% brightness like a nightlight. Interested in the Tradfri motion sensor, but Ikea says it needs their hub. Can I use any other zigbee hub/bridge, with an Ikea motion sensor, along with a suitable 'smart' LED bathroom ceiling light? Just confused abotu which devices are 'universal' and which need to be paired with specific manuafcaturers kit. Cheers mate, keep up the good work on the vids.

  • @hopwon
    @hopwon 2 роки тому

    Paul, any idea when Ikeas Matter hub will be available over here? I see its out in the US

  • @daxxavier9910
    @daxxavier9910 Рік тому

    You are hilarious! Now I want one of these motion sensors.

  • @theattorney6072
    @theattorney6072 Рік тому

    Hi, does it work with Hue lights ? Also is it possible to have a hue hub for ambilight arround the TV, and an Ikea hub for other lighting ? Thx

  • @oddstr13
    @oddstr13 10 місяців тому

    While the textless mounting instructions show a picture of it clearly mounted in the garden (under roof), it may not be suited for outdoor use depending on your climate and outdoor conditions.
    According to the instruction manual, it is rated IP44 (which is better than I expected), but with the additional notes of
    "Do not subject the unit to wet or excessively dusty environments" and
    "The unit can be used in temperatures ranging from 0°C to 40°C" (freezing to high fever)

  • @ugh635
    @ugh635 2 роки тому

    Lol at the smut part of the commercial! 🤣

  • @davidmcintier128
    @davidmcintier128 2 роки тому

    This video is comedy gold, keep it up!

  • @ecotts
    @ecotts 2 роки тому

    Only thing id like to see is either a USB or Microsd card backup port on the side of the Hub, in case the HUB dies or an integrated OneDrive, drobox, google drive, FTP, Shared drive integration that you can send encrypted hub backups too.

  •  2 роки тому

    Great video!
    I was wondering if you can also pair the motion sensor directly to a smart outlet?

    • @leopold7562
      @leopold7562 2 роки тому +1

      I’ve got a sneaking suspicion that you can. But don’t hold me to that

    • @rymdbarn
      @rymdbarn 2 роки тому +1

      I can confirm you can and it's done exaktly like with the bulbs

    •  2 роки тому

      @@rymdbarn thank you!

  • @theattorney6072
    @theattorney6072 Рік тому

    Can we connect two motion sensors to one same bulb ? Also, if connected to Philips hue bridge, Can we setup that the lights don't turn on After power outage.

  • @CoolSilver
    @CoolSilver 2 роки тому

    IKEA and Home Assistant with Conbee is nice. The Motion sensor is slow and wonky. The rest seems great, bulbs, buttons, and outlets... Oh my!

  • @williamburgess718
    @williamburgess718 4 місяці тому

    Paired all my ikea stuff to my home assistant. Setup is way easier than having to goto each bulb and pair the remote / motion sensor.

  • @drivingpsyche
    @drivingpsyche 2 роки тому

    I use their undercabinet led lighting system in HA. Simple solution without going DIY led strips.

  • @Weeem
    @Weeem 2 роки тому +1

    The timing... I literally just got my first couple of Tradfri bulbs to try out today.
    Big bonus for potential buyers, the bulbs have the following power on state options:
    On
    Off
    Toggle
    Previous State
    By default they act like a normal bulb (on) to work with a regular wall switch, but you can set it to off or previous state for use with a smart switches.
    For anyone wondering how to get them into pairing mode for integration to Hoooome Asistant, do this:
    1) have sexy time (might as well before you get lost setting up automations)
    2) switch off the bulb in a live socket
    3) switch the bulb on/off 6 times about 0.5s intervals
    4) on the last on/off cycle, leave the bulb on
    After 5-10s it should start pulsing/breathing or some weird dimming thing it does..... That's it in pairing mode.
    The manual says to have the bulb 15ft away. It was a bit slower to pair (20s or so), so not sure if it could be done further.
    Note: You HAVE do each device one at a time otherwise they won't integrate properly.

  • @mitchellpeterson7943
    @mitchellpeterson7943 10 місяців тому

    Hello from the future! Have there been any changes to the motion sensor being able to pair directly with Alexa yet?