1) Power up your boat with main switch 2) Turn radio off 3) Simultaneously press and hold both the "X" and "Scan" buttons 4) Turn radio on and wait a few seconds until the radio boots up and you see a menu asking for the code 5) Release both keys 6) Enter code numbers numbers below using the rotary dial Simrad RS35: 7100 Simrad RS40: 2137 Simrad RS40-B: 2406 Do a factory reset.
@@sailorpete136 If you were able to reset the radio to factory, to set the MMSI number if you don't see it come up right away: 1) Long press on MENU key 2) select DSC SETUP 3) select USER MMSI 4) select '>.' That should bring up the screen for initial MMSI programming.
@@sailorpete136 If you're able to get into the factory reset menu, it means the software hasn't changed. They only changed the password number between the RS35 and the RS40.
удивлен ,что невозможно отремонтировать ,столь не сложную поломку . Я не знаю кто диагностировал , но там явно видно наличие плохого контакта и именно там перегрев. Сервис мануала нет у меня на эту рацию ,более предметно не скажу.
![How to use a Marine VHF RADIO [Capable Cruising Guides]](http://i.ytimg.com/vi/Y6yn0Bmr748/mqdefault.jpg)
![How to use a Marine VHF RADIO [Capable Cruising Guides]](/img/tr.png)
you are the best captain from Ukraine!
Good video, you save me some money, next time I go to Panama I will buy you some beer🤙
This world is small. will keep in touch in Asia, cheers
Good content
Thanks for the video. Glory to Ukraine!
I just yesterday bought b&g vhf v60 b gps ais transducer. Hope it will work properly.
Nice. That a game changer! Cool to know
@@CaptainGermanExploring because ais transducer and gps build in and all in one Box?
@@Bor1945 i check it is only receiver. But may be it is not full information
@@CaptainGermanExploring как получаете прогноз погоды когда нет интернета, спутниковый телефон, navtex
@@Bor1945 через спутниковый телефон, турая или инмарсат
Hello, I want to buy a SIMRAD RS25. Do you recommend this? Thx
I had no issue with my radio. It is 35 but I think 25 is fine
After pushing this three buttons if it come to mmsi reset, they turn me into “pc mode”. I can’t put any code there. Have some advice? Lowrance link-5
May be it programming with computer. Just guess
Cool and interesting info. Куди писати з приводу навчання яхтингу?)
@captaingerman телеграм
Do you have procedures for rs40-b change mmsi?
1) Power up your boat with main switch
2) Turn radio off
3) Simultaneously press and hold both the "X" and "Scan" buttons
4) Turn radio on and wait a few seconds until the radio boots up and you see a menu asking for the code
5) Release both keys
6) Enter code numbers numbers below using the rotary dial
Simrad RS35: 7100
Simrad RS40: 2137
Simrad RS40-B: 2406
Do a factory reset.
Thanks for that but sorry it didn’t work. After reset is skips the MMSI number.
@@sailorpete136 If you were able to reset the radio to factory, to set the MMSI number if you don't see it come up right away:
1) Long press on MENU key
2) select DSC SETUP
3) select USER MMSI
4) select '>.'
That should bring up the screen for initial MMSI programming.
@@ahndeux I think simrad have changed software to prevent this being done.
@@sailorpete136 If you're able to get into the factory reset menu, it means the software hasn't changed. They only changed the password number between the RS35 and the RS40.
Да, подписаться я успел😂
удивлен ,что невозможно отремонтировать ,столь не сложную поломку . Я не знаю кто диагностировал , но там явно видно наличие плохого контакта и именно там перегрев. Сервис мануала нет у меня на эту рацию ,более предметно не скажу.
Да можно пропаять но нужно понять что там еще отвалилось. Такое в целом легко чинить