@@propelvirtualgarage963 I just rotated it. I can feel the binding. Took it off the belt to see which part it was. There's slight pressure when rotating like I can feel the wire rubbing or something. Thanks for the help
Do the castle nuts on the axles have to be tightened all the way? When I do this I can't get the split pin through, and if I loosen it a bit so the split pin goes through then the wheels are a bit wobbly.
They should be more than tight enough not to wobble. If you could send e a video, that would help me troubleshoot it. Send to service.usa@cycleagle.com
i cant wait for the endeavor video
Where can I get the white handlebars that can be seen at the bottom board at 4:40 ?
Thank you so much for this video. It totally educated me on the adjustments. Thank you!
Can you make a video on changing the belts on the x4s please.
Yes I’d like to see this as well
ua-cam.com/video/wb4TqgWSbwQ/v-deo.html
Thank you. That is for the hubs for X4S not the belt. Is belt the same way?
Good job Russ
The tires say "inflate to 50 psi" which is what I did. It feels pretty hard. Do you have any hints on tuning the tires?
I personally take 10 lbs out if Im offroad all day but ride them right at 50 on the street
One of my motors blew out after one use and I can't reach the cord. It's buried in there. How do I unplug the cord on the propel X4S motor?
You take the deck off to start, thats how you access the internals but how did you diagnose that you had a bad motor?
@@propelvirtualgarage963 I just rotated it. I can feel the binding. Took it off the belt to see which part it was. There's slight pressure when rotating like I can feel the wire rubbing or something. Thanks for the help
can you make a video how to change the cs battery 🙏 🙏 🙏 🙏 🙏
cs battery?
@@propelvirtualgarage963 yes
Can you make a video or a link to the Guide to the belt change?
ua-cam.com/video/YsfjWuWO9Po/v-deo.html
@@propelvirtualgarage963 this video actually doesn't show the belt change or tension. Is there any videos on this? Thank you
@@philcantuay946 Yes, In this one Phil
ua-cam.com/video/wb4TqgWSbwQ/v-deo.html
Do the castle nuts on the axles have to be tightened all the way? When I do this I can't get the split pin through, and if I loosen it a bit so the split pin goes through then the wheels are a bit wobbly.
They should be more than tight enough not to wobble. If you could send e a video, that would help me troubleshoot it. Send to service.usa@cycleagle.com
Mine does the same and they are tight, well i thought they where, it's my next trouble shoot
@@gregbrowne2491 Accept friend request on FB, I want to chat with you and Dave together
Also. Some times you need 2 washers to get it lined up properly. I should have mentioned that earlier