Hey 🙂 I loved the content and really need this video for my own brumby project here in Sweden. Could you please, please, please upload this series of video's on the Brumby project again, but this time without music or only have 20% of the volume... i understand English quite perfect but i can't hear 10% of what your saying.. Please please please 🙏
Thanks for your support mate! I’ll see what I can do. My editing sucked in these videos, if I can find all the footage I definitely could redo it for you
Oh, i hoped you had the video project saved on a computer..then it would been very simple to just delete och lower that specific audio track.. I didn't wanna put you in trouble 🙈
Turns out we didn’t have the old footage, so we have done a remaste. If you have trouble understanding (I’m not a very good speaker) you can access the transcript in the description. Hope this one helps you! ua-cam.com/video/TGd39B7HdrI/v-deo.htmlsi=49aaa-Cdt3DBgtJD
I normally give then a once over with a razor blade. Then use some very fine wet/dry sand paper and use wd40 instead of water on the sand paper. Scotch bright does a good job just be careful not to gouge the head. Or the best option would be to get the heads machined
“If you don’t know how to use a torque wrench, just use the rattle gun” love it.
It was be to loose if you do that 🤣🤣
Excellent stuff, music is kinda loud though
My editing is quite bad. I fired my self from that job 😂
Hey 🙂
I loved the content and really need this video for my own brumby project here in Sweden.
Could you please, please, please upload this series of video's on the Brumby project again, but this time without music or only have 20% of the volume... i understand English quite perfect but i can't hear 10% of what your saying..
Please please please 🙏
Thanks for your support mate! I’ll see what I can do. My editing sucked in these videos, if I can find all the footage I definitely could redo it for you
Oh, i hoped you had the video project saved on a computer..then it would been very simple to just delete och lower that specific audio track..
I didn't wanna put you in trouble 🙈
I appreciate your feed back and will see how we can make it better
Turns out we didn’t have the old footage, so we have done a remaste. If you have trouble understanding (I’m not a very good speaker) you can access the transcript in the description. Hope this one helps you!
ua-cam.com/video/TGd39B7HdrI/v-deo.htmlsi=49aaa-Cdt3DBgtJD
What type did u clean the heads with exactly so I can in future 👍
I normally give then a once over with a razor blade. Then use some very fine wet/dry sand paper and use wd40 instead of water on the sand paper. Scotch bright does a good job just be careful not to gouge the head. Or the best option would be to get the heads machined
What kind of torque wrench is that? I'm in the US, I've never seen one like it before.
Im not sure, it’s very old and crappy 😂