3GuysSolar Owner Training SolarEdge Startup
Вставка
- Опубліковано 16 жов 2024
- This video will show you how to turn on a SolarEdge gird-tied solar photovoltaic inverter and how to read the status lights. The instructions are specific to the HD Wave Set-App model but the steps are similar for the HD Wage with display and A-series models.
Thanks for video
Best explanation of how to turn on the SolarEdge system I have found. Better than my installer (Not you) or anything the company sent me. Thanks!!
Careful with these SolarEdge inverters, they are known lemons. Mine went out last year and I lost several months of energy generation waiting for warranty replacements. I know several people have had to replace these models multiple times...
Even though I wasn’t one of your customers, this video was extremely useful in helping me getting started up with the same equipment. Quick question, how is it connected to the internet? Does it have some sort of 4g broadcast internally or is it working off of my house wifi? Thank you.
The inverter connects and communicates with the internet with the help of an internal cell kit.
It has a microchip on one end that attaches Into your inverters mother board and on the other side of the wire there is an aantenna that gets wired through the left side and mountet on the top.
It can also be hard line ran into your modem with a cat 5 Ethernet cable but it's it's rare to hardline direct to modem. 98% of the we just add the cell kit
Hi Andy what if i only have the green led on solid only? no blue or red
I’m installing one currently but the only thing I get is a flashing green light anyway to fix this?
What is wrong when the green lite is blinking blue is solid
I have 2 boxes one on left has only solid green but blue off, and the one on right has both solid green and blue, is that normal for one of the boxes not yo have blue on?
Solid green light show the inverter is producing power and the blue light shows the inverter is communicating to the SolarEdge servers. The left box with no blue light shows it has no communication. Check the SolarEdge monitoring app for the array and see if all the panels show production.
My relays closer but all three LEDs are solid
What does it mean when the green light is winking(every 4-5 Seconds)? I have already reset the system several times.
should be solid green during day. blinking at night (no power production) I think!
how to set the limiter