Everytime I watch one of your videos I see people in the comments complaining about the variety of songs, making matches jokes and saying that you only make useless shit. But I must say that I really appreciate what you do and would like to try everything you teach in your videos, keep doing like that Mr. Gear!
I was thinking to make one to strip wires. Those tools are a couple of Benjamins. I wasn't sure what material to use. The needles are a great idea. I want to use 18650 batteries.
I made a tool using same instructions n i used 9V battery but its only heating up the needle not making it red hot, pls let me know how much volt battery you used in this device
Brilliant! Thank you very much for your highly valuable life hacks. these have absolutely one needs at his small home honby workshop. Cannot appreciate more for your priceless contribution. I'm sure now your paid good by UA-cam. Good Luck!
never use a li-po battery for such applications . even a bench supply I wouldn't recommend . this is basically a short circuit without a shunt resistance . pretty dangerous I'd say.
i agree he needs to talk in his videos "assuming he can speak english" because nobody knows what the things you are using are from or what they even are sometimes
Maybe just to reheat solder for desoldering, along with a solder pump. I am pretty sure that no solder would stick to those needles, so it would be a very impractical soldering "iron".
You can also salvage one from old devices that use 9 volt battery. Some examples can be found with radios, remote control cars and remotes. You can also check hobby electronic stores like radio shack.
ive just done one now using a paper clip? i was certain the battery was going to explode at any point, the paper clips did get hot but not redhot. is it better to use needles would that stop the battery getting hot????
I always wondered, is it safe to create short circuits like this. I know for a fact that with lithium-ion batteries there is a risk of the battery shorting out and exploding, what about 9volts?
It's basically like connecting a resistor to 9v battery terminals. If you want to drain your battery fast, build and connect this. I made one using a larger paper clip, but it doesn't glow red hot, just drains the batteries! If you do try this or anything like it, keep a finger on the battery to quickly disconnect if/when it gets hot.
A 9V battery has an approx power drainage max at 500mAh. what's the power drain of that setup? it probably depends on the needles gauge right? how would you check for safety with a multimeter?
hello partner, great videos, did the tool, the whole process well until connect the 9V battery, but the tips are not heated, only see a small spark at the tip or just anything, I moved the tips to see if warming but nothing, I have no idea if I'm doing something wrong or what, because I followed the same steps and nothing ... 8 / if they could help me .. thx
Ot is ok good sirs to be envious of me and my bolivian girlfriend i have no doubt in my mind that you both would like to smell of sex after being with a bolivian girl but alas you will never ger the chance
*facepalm* это не аккумулятор, и электричество в батарейках вырабатывается за счёт хим реакции, которая идёт в не зависимости подключён ли источник потребления
He didnt burn the wiring he used a substance called solder which is used to fuse wiring together commonly in electronics and the item is called a soldering iron
Everytime I watch one of your videos I see people in the comments complaining about the variety of songs, making matches jokes and saying that you only make useless shit. But I must say that I really appreciate what you do and would like to try everything you teach in your videos, keep doing like that Mr. Gear!
Where do we put the matches on this one?
😂
he was using mahogany for the wood, tungsten for the two metal pieces and spider silk for the string.
+1st One Terarria lol -_-
dua hk z ad kim ong chit ha
Nícolas Piano VMware. der jugtzgzzgzzhahs hahahahahhahahhhahahaaah
Good Video Dude Keep it up
Thats my favourite video from you !!!!! I WANT MORE SUCH VIDEOS !!!!!!
Azərbaycan dan cox gozel 👏👍
Круто! Спасибо пригодиться и позновательно и научно
I came here for the wide variety of music
Can u plz tell the name of the music used in this videos plzzzz
+Nawaz Ahmef
its called dutty - youtube aufiolibrary
Thanks:
Thanks! :)
я русский
omg 2160 qouliti oms :D cool videa
well done bro superbub
I was thinking to make one to strip wires. Those tools are a couple of Benjamins. I wasn't sure what material to use. The needles are a great idea. I want to use 18650 batteries.
I made a tool using same instructions n i used 9V battery but its only heating up the needle not making it red hot, pls let me know how much volt battery you used in this device
Brilliant! Thank you very much for your highly valuable life hacks. these have absolutely one needs at his small home honby workshop. Cannot appreciate more for your priceless contribution. I'm sure now your paid good by UA-cam. Good Luck!
00:14 what was that? is it copper or just a string?
It's just string
it has to be something that doesn't conduct current. It's just there to hold both needles.
Nay-r06
It is a string that is wrapped around both needles. A non-conductive string. It's there to hold both needles. So what is your question again?
wow very nice !!
Works great, but that 9V battery will be dead in a couple minutes. 9V batteries are not designed to supply a lot of current.
Very easy...and..nice..video..
WOW... Nice Video
Good vlog
never use a li-po battery for such applications . even a bench supply I wouldn't recommend . this is basically a short circuit without a shunt resistance . pretty dangerous I'd say.
me gustan tus vídeos
a few moment later...
battery exploded
Bro pls write the material names at all videos.We are not understanding what we use.
yeah
i agree he needs to talk in his videos "assuming he can speak english" because nobody knows what the things you are using are from or what they even are sometimes
+Ben Esterling dude he can write in English he probably can speak it too
I Agree
If you can't recognize materials in this video - DIY is not for you. =)
superb what a tool
super job love this
nice make
bro u are briliant your videos are 100 time better than crazy russian hacker
nice video/ nice trick^^
Wow extremely easy to make
Thanks mr.gear useful I wanted to make a great birthday present for someone and print something on wood
Nice one.
what gauge needle did you use
Good job sir tnx lot love it's 💕 💕 awesome
I love your inventions
mr.gear plz make more video i m promise i will watch ur video trust me
Does professional phyrography tool any extension burn like this at the top?
aweome video gear
Awesome work. U r awesome
Amazing idea!
You are nice I am so happy to see this video,and I try to make this.thanq
mr gear pleas tell it can be used as soldring iron
Thanks for making this video
this little machine is awesome !!!!
Awesome
can it be used as soldering iron?
Sourav R Nath you can buy soldering irons cheaper than the materials used to make this. Depends how shitty you want it
Maybe just to reheat solder for desoldering, along with a solder pump. I am pretty sure that no solder would stick to those needles, so it would be a very impractical soldering "iron".
cool thanks!!! :D
What is this thing 0:41 and where can I find it?
Its called a Snap Connector. It can be found on things like amazon :)
You can also salvage one from old devices that use 9 volt battery. Some examples can be found with radios, remote control cars and remotes. You can also check hobby electronic stores like radio shack.
ive just done one now using a paper clip? i was certain the battery was going to explode at any point, the paper clips did get hot but not redhot. is it better to use needles would that stop the battery getting hot????
wat kind of thick wire did you use pls. i want to make oe
I always wondered, is it safe to create short circuits like this. I know for a fact that with lithium-ion batteries there is a risk of the battery shorting out and exploding, what about 9volts?
Its fine dont worry
It's basically like connecting a resistor to 9v battery terminals. If you want to drain your battery fast, build and connect this. I made one using a larger paper clip, but it doesn't glow red hot, just drains the batteries! If you do try this or anything like it, keep a finger on the battery to quickly disconnect if/when it gets hot.
Can i use this for solder the pond?
good video
wow bro well done
A good idea but the battery heats up very quickly and discharged very quickly!
nice thim
Do we have to use the syringe needles or can we use some type of wire ???
what kinda needle or metal thing is that
THE BATTERY GETS REALLY HOT 🔥🔥🔥☹️😱 EXPLOSION IMMINENT!!!
можно спросить , в этом моменте - 0:45 ты заклеил или запаял?
nice
do you have to use syringe tips or can it be something else. pharmacies here dont like handing them out
wat is the material you are melting and covering the top portion?
what type of needles are you using and where do you buy them at ?
Do we have to take a special thread or is a normal ok?
Can i use Nail like metal thing.
sewing needle
+Jamil Khan sewing needles do not work!
we should have read this comment before, sewing needles really don't work - will try hypodermic needle soon...the problem is obtaining them!
A 9V battery has an approx power drainage max at 500mAh. what's the power drain of that setup? it probably depends on the needles gauge right? how would you check for safety with a multimeter?
was it a copper pin or aluminium pin ? or other metal ?
it is basically a steel needle which comes on a syringe, steel has a high resistance so it becomes hot fast
Fantastic
We can use this as soldering iron? Plz tellll...
интересно - лайк, а иголок на долго хватает?
Can I use this as a soldering iron
Bravo continua cosi
would 2 sewing needles work?
hello partner, great videos, did the tool, the whole process well until connect the 9V battery, but the tips are not heated, only see a small spark at the tip or just anything, I moved the tips to see if warming but nothing, I have no idea if I'm doing something wrong or what, because I followed the same steps and nothing ... 8 /
if they could help me .. thx
Daniel Duarte I too having same problem
Would it work with needles from a button
Hey, What is the wire thing used at 0:05. p.s. I like your channel. :)
Hi McGear, you need to speak in the videos or list the items used in each experiments. It will make your channel much productive and useful. Thanks.
*MrGear
Soumyadip Pal
I mean, it's pretty easy to see.
Stick, thread, needles, plastic cover, battery, wires, glue, solder...
How long does the tip last?
my girlfriend is bolivian and I smell of sex
Thaaats.... great?
Actually, he may be the smartest man on the planet xD
Ot is ok good sirs to be envious of me and my bolivian girlfriend i have no doubt in my mind that you both would like to smell of sex after being with a bolivian girl but alas you will never ger the chance
WTF LMAO IM CRYING XD
я думаю что,крона будет быстро разряжатся т.к у неё и так не большая ёмкость а тут ей ещё и кз устроили
*facepalm* это не аккумулятор, и электричество в батарейках вырабатывается за счёт хим реакции, которая идёт в не зависимости подключён ли источник потребления
+ThePowerRout это тебе facepalm. Все правильно он написал. Что батарейка, что аккумулятор обладают ёмкостью.
can we use it as soldering iron
tool used to burn the wire?
He didnt burn the wiring he used a substance called solder which is used to fuse wiring together commonly in electronics and the item is called a soldering iron
+Michael Goold oh ok because I needed one to fix my quadcopters internals
thank u
your welcome i fix all my electronics myself its cheaper and easier that way you can buy online not too expensive and can be used easily
Yup cheap on gearbest for 10 dollars
how much time does the 9v battery lasts
it s very beautiful
Hey what would happen if you upped the voltage to a much higher voltage. Would it burn more or have more spark?
Waw like pen
I think it can also be used as an a solder
will you please tell which thread you have used??
what tube did you use?
Super
At 1:30 you can use it like soldering iron
Wow, this is an awesome thing to do! I might do it for my school science fair 😉
What are the metal things he uses at the start!!
If I were to add a resistor to this, how and with what would I do it? I've heard that these things can short circuit and explode with out it
materials needed?? ik its just like batt 2 pins wire what else are those thingys?
Can we sold threads on the batteries? What's the name of the thing on the batterie with the threads?
у Роман Урсу спизжено
+
да
Уйди
до
Это англоязычный канал
всем похуй
Easy build mine works great thanks
Can we use simple needle
What are the two metal thing from?
Syringe needles - but what gauge and length?? 18ga x 25mm?? 22ga x 25mm?? Please enlighten us...
yasss! I did it! I make hot burning stick! :P
erytrohaem
this amazing :)!!!!!!
is there any chance of blast due to over heat of battery. ???