First 3D printed sewing machine / How a sewing machine works

In this video I build a DIY chain stitch sewing machine. I think it might be the first DIY sewing machine that exists.The sewing machine was originally designed as a hand-operated sewing machine. However, it works much better when powered by a motor. The main point of the sewing machine is the chain stitch hook. The chain stitch hook is the most complicated part of the sewing machine and took me several hours of work. This must be very clean printed and have a smooth surface. I printed the hook in 2 parts. Another challenge is to set the thread tension correctly. Here you have to experiment a bit. If the sewing thread has too little tension, the chain stitch will not be tightened cleanly. A normal sewing machine needle was used. If the machine was adjusted cleanly, it works perfectly.The sewing machine is built with 3D printed parts. However, some shafts and sleeve bearings are needed.You can download all parts on Thingiverse or Prusarprinters.If you like this sewing machine, please give me a thumbs up or subscribe to my channel. This will improve the ranking and the project will be seen by more people.
If you have questions about the project, ask me.
Thank you!
You can download the parts here: cults3d.com/en...
or here: fraens.etsy.co...
If you want to support me: paypal.me/FraensYT
Filament: amzn.to/3gfuhMb