How To Make Camper Overhead Lockers / Cupboards With 15mm Lightweight Plywood and T Trim
Вставка
- Опубліковано 29 кві 2021
- Brief video showing how to make cupboards for your camper, Using 15mm Lightweight plywood in a cream gloss finish with black T Trim.
#camperconversion #diycamper #camper #campervan #motorhome #howto #campercupboards - Навчання та стиль
Tip. Tape a small offcut of the ply to router base to stop it tiping inwards
Now all i need to make this is....a workshop and a mountain of power tools yay
I must congratulate you on the best instructions I have seen yet. Thanks for all the effort guys, keep it shiny side up. 🇬🇧✌️
Excellent Teamwork and clear instructions. Cheers from Michael. Australia.
Watched this at least four times now. Love the way you work as a team. Im going give this a go. I'll remember to just tilt it just a little bit with the adjustable square.
Cracking video more like these would be perfect well done guys
Great job you guys. Thanks for posting.
This is really great craftsmanship and awsome detail will use this as a guide.
I’ve just come across this video, great workmanship from the both of you, didn’t realise that you were from Wrexham, I used to live down the road in Llay, just watched a few of the other videos and recognised where you are, a lovely peaceful spot by the river 👌🏻
Love you guys!!!
Amazing job, looks so good fitted.
Oh, how I wish we could get/order your BEATIFUL"" Creation Campers" here in Canada Waahh !!! 😰😥 Such awesome work, and sweet family people, with such a great cooperative, true team work attitude in how to do things and the knowledge and abilities are spot on !
Oh well, we will just have to wait for you folks to open an Ontario Canadian branch... LOL! 🤔😊👍🙌
Busy busy people lol 😂 great stuff folks
Good stuff, Creation Campers are back up. Nice job, definately buyin a router, and earmuffy thingys. Nice 1 Gem, doing a cracker job on the door. I'm rethinking, maybe a Commuter instead of an Iload or a Transporter. Thanks m8, you and yours stay safe and well.
No builders bum here!
Gemma you sound so posh with your commentary and you look like your handy with the tools
Simon saw your handiwork and can't wait for you and Gemma to start your other build and shut all the doubters down and show that you will do it and do it well
As always your way is the right way all the best
Dave
Thank you for posting this, it’s giving me ideas on how to do the inside of my grandparents boat if I get her, much love
Surprised there's not more comments. Great tutorial :)
Great video! Nice skill to have for some upcoming projects I would like to do.
That looks absolutely amazing! I have to ask though, where did you get that wood, and what is it called?
Hiya, thanks for making and sharing this video. Where do you get the aluminium strip from that fits the front and bottom of the cupboard together? Thanks 🙂
thank you very much. very clearly explained
Although I know myself it might be useful to say how you make the jig/template ie get the straight edges and nice curves
Love the way UA-cam automatically generates captions based on your “regional” ascent
Great video BTW
CNC machine is one way to make the templates
Nice job.
Awesome instructions. But side questions, what is it with UK and using carpeting? Its basically a small and dust magnet.
Really good cheers
Much appreciated
What fixing did you use to to fix the cabinet to the van so that it's safe?
Great idea to use the router to cut out the locker door.
Do you think those evo design catches would work ok for drawers? The info says it’s a drawer and door catch.
Could I ask what size hinges you recommend please (and a good supplier too please)?
Hi, what have you used on the van to line the walls? It doesn't look like carpet. Thanks
Great video! Do you do anything to avoid the surface laminate chipping or breaking away when routering???
No it cuts really clean with the router
Hi guys love the videos, can I ask where you buy your T trim
What did you use to cut the template out with ? Another Template ?
What size screws do you use to screw the 4 screws for the front to the back of the evo catchers many thanks
Could you please let me know where to get the blinds for the frame windows. Thanks
Hi. Can you tell me where to get the aluminium extrusions and what thickness board they take please. Cheers
Great video guys thanks for sharing. Can I ask where you buy you laminate board from. Keep up the good work.
These where from Morland uk
Hya. just found and subscribed. I'm not a router expert but I enjoyed watching you do this. I'm presuming you used 15mm ply? If I was to attempt this using a 9mm ply template to cut 18mm ply, what length of bit would you suggest to router out two doors like you showed here? You mentioned the width of the cut but not the depth of the cutter. Many thanks :) - Kenny
have you got a link for those latches ?
Would you recommend a particular radius bend for corners like the doors for the overhead cabinet you did?
I just use a cutting disk for the radius 🤣
nice vid nice folk
Thanks for showing, love your work.
It must be kind of satisfying, do you enjoy that sort of work or is it just a job?
We love what we do, working would be no fun if we didn't enjoy it! We love that we can be creative and build things for people to just how they want it! Every job is different so never gets boring, obviously we don't enjoy the other side of running a business like taxes and vat!!!
It’s obvious they love what they do and it’s more than just a job! If they didn’t enjoy it and it was only a job for them then I can promise you that they would not be making these videos to try and help show us out here how to do it on our own
Can I ask what type and size of router bit you use to cut out doors to accommodate T trim on door and T trim on opening .? thanks M
Hi. Where do u get that glossed board from. And is it painted gloss finish or laminate. Cheers.
what size flute bit did you use please
Nice job ! Could you please write where I can get that lockers? It relocated seems nice . I am starting making kitchen cabinet and want to install it.
Evo catches
Hi guys,
Thanks for a great video. What size hinges do you use and where did you get them?
Thanks👍
What size router bit for door cut outs please
will be contacting you tomorrow !!
You don't use locker trim on the doors just normal T trim?
Also what are the door catches you use?
Thanks
Frank
Where did you get the ali corner beading stuff from or is that from the same place as you got the lightweight ply?
You can get from Moreland ply welshpool
Could you please send me a link for that router bit? Can’t seem to find it anywhere please can you help me out?
Were do you buy everything from?
Thanks. Really informative. I'm just curious where did you get your router bit from. Is it specialised?
1.5mm slot cutter, you can get these off ebay x
What about the router bit for the cupboard doors?
What wood do you use and how is the cupboard held/attached to the ceiling / wall? Cheers
These are made from high gloss cream lightweight plywood, held to the walls with kregs and to the celings with corner connectors
High Guys .can you tell me where you purchased your OVO catches .love your enthusiasm. Thanks (H).
Direct from Evo
how long did it take to cut out also did u cut all in one go
You just use corner blocks to hold the whole cupboard up? This strong enough? I know people are unlikely to store really heavy stuff up there but just wondering how strong that actually is.
Ps sorry forgot to say great video. 😬👍🤪
Great video, do you have a link to where I could get those hinges and catches from?
www.ebay.co.uk/itm/170mm-Cupboard-Locker-Door-Stay-Metal-Caravan-Motorhome-Boat-01606T070-/232987351342?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
www.ebay.co.uk/itm/5-x-Black-Evomatic-Door-Handle-Catch-For-VW-T5-T6-Furniture-Camper-/172979635558?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
Thank you 👍
Hi. Could you tell me me where the catches are from please and which ones they are?
Has anyone found the aluminium extrusions yet that they are using? They don't seem to have put a link on about it yet ? 😢
You should really be using ear protection as well tinnitus isn’t nice believe me I know, very informative always a quandary as to the best way to router out doors many thanks
Best way to cure tinnitus…….keep using the router without ear-pro. Takes a little while, but it definitely works
@@kalikasurf sorry what is it that you use for tinnitus?
@@Teknamli going deaf……from continuing using loud machinery without ear-pro.
it was a joke.
@@kalikasurf got excited there for a second
Where did you get those latches from? What are they called? Thanks!
They are Evo catches x
@@Creationcampers Great thanks! I wish they shipped international! I have been trying to find this style of hatch for ages!
What door stays are they
www.ebay.co.uk/itm/170mm-Cupboard-Locker-Door-Stay-Metal-Caravan-Motorhome-Boat-01606T070-/232987351342?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
Where did you get / find your cutting templates
We make them all
I'd say trims want soke pva on seen load shrink down in winter and be too short
Where is your hearing protection???
i thought i was the only left handed scouser
Hi guys n gals,
Can you just use a jigsaw instead of a router?
Trying to avoid buying a router, thanks.
Hi what is that ally profile called please
Hey just noticed "ship happens" 😃
Front... windows.
Being less practiced, and prone to messing up; I'd have to put a shim on the off side of the router while cutting the door to prevent the router from tipping. Because, for me you know - it would.
I was wondering if putting the slot cutting router in a table so you don't have to clamp the door down then take time to unclamp, reposition, reclamp. If the table surface was small enough you could grip the door on the edges so you had a proper grip.
Being a wee bit older than you can say this (as in been there done that); get some hearing protection when using those machines. I prefer over the ear, but I got these molded units from Amazon for when I ride the motorcycle and tend to use them now (don't squish my head!). It does NOT affect the wife filter either. :^)
I needed ear defenders just watching so I think you guys should use them if you're doing this.
Great video, please get some ear protection on or you will suffer when older.
campers happen
Great video, iv used a 6.3mm bit and they don’t fit into each other 🫣