DIY Brake Caliper Press Tool for less than 10$
Вставка
- Опубліковано 1 жов 2024
- Hello everyone,
in this video you will see how i made the brake caliper tool.
Home made brake caliper press tool.
It took me a few hours and I spent a couple of dollars.
All the parts I had at home from before and have already been used.
You don't have to have new parts to make this.
Every time you change the brake pads, your job will be much easier.
This video shows the whole process of work.
Watch the video to the end and press thumb up if you like the video.
Write in a comments what do you think about this work!
Of course if you’re not already following me click on subscribe and share the video.
Video is recorded in 1080p 60fps!
#caliper #brake #2021
Well, I respect all ppl who "dare" to make something on their own ! So my critics is to get it positive and like advice - I have to say it first so you would get me in the right way... I would first took paper and draw few ideas how tool will "work" - where are points of load, where strongest force and from wich dirrection works, what parts will "suffer" the most..... 1. That tool I make is safe - with min. possibility to damage something or someone. 2. Solid and strong construction and made from "good quality" materials - able to stand all torture and beating ( X3 times more strong than is just enough .... etc, you get what Im saying :) 3. To be practical and easy to use and last place 4. - how it looks, painting, etc.... So - I would invest in two pcs of much stronger plates and stronger bolt & nuts - not in spray paint and that nut closer to you I would weld on other side of plate or weld one more :D Thank you for video - you gave me idea and reminded me that I need to make one for my self too - Im making it for few years now LOL ! Somehow I forget it all the times and something "more important" come up so Im using piece of wood and large pillers or I somehow menage to do it with what I have... LOL !!! Cheers dude !
Hi,
Thanks for watching.
I agree with what you said when you making anything it's much easier when you have plans.
I made this tool with idea from my head.
Took some materials what i have and make this tool.
The quality of this tool is respectable and as it is on video you can easily return piston to start position.
Size 14 bolt only 28 pesos
Ficou muito boa, porém para aprimorar mais ainda, no lugar da porca onde coloca a chave para apertar seria mais interessante soldar um cano de 10 a 15 centímetros, porque não precisa se preocupar com a chave certa e daria para fazer alavanca com outro ferro mais longo por dentro do cano caso ficar pesado, parabéns.
Just use a "C"clamp vise grip. Much quicker.
I can buy one for less than a tenner 😂what's the point
Rip and farewell all seals LOL
Good idea but you can buy the tool fr harbor freight for $7.99
Hi,
Thanks for watching.
I know that there is a lot of tools couple $...
But I wanted to make my own tool and model.
This one is simple and you can use it in multiple brake models.
Better than my current method of "put a piece of wood across the piston and squeeze it back by hand"
Hi,
Thanks for watching.
Before I made this tool.
I used similar methods as you do.
With this tool, job is done faster and easier.
Sure it's a DIY but most people don't have heavy machinery equipment laying around to make this tool
Hi,
Thanks for watching.
If you think that welding machine as a heavy machinery equipment...
Don't know what to say.
Everyone can get used one for 50-100$
@@MCTutorialsOnline you're right but most people don't need and thus, won't buy such equipment. Why would I buy a power drill if I use it once in 2-3 years.
For DIYers we'd simply use something you can find in any household: wooden stick and hands for example ;)
I’d buy that now, if you’re selling
Hi,
Thanks for watching and for interesting to buy it.
I only have one of this item and I'm using it.
At the moment I'm not selling it.
That “washer”.... an end of an oil filter?!
Hi,
Thanks for watching.
I'm not sure from what part is that washer.
But it's fitted good.
You can use any round piece!
Sehr gut gemacht, gefällt mir sehr... 😎
$10??? About$300 worth of tools and $50 of labor
Hi,
Thanks for watching.
I didn't say all parts are for $10.
All tools i have from before and didn't buy it for this project.
I didn't payed for labor.
I make this tool in my free time.
Cool just being sarcastic. I m a do it guy too
Some people have no idea how to use common tools to make something useful to help them do a task. They can't be bothered. Others enjoy making useful stuff to make jobs they tackle easier. More power to you for posting this video. Cheers. The people who can't be bothered or don't have the simple tools you used, I kinda feel sorry for. They probably pay for complex jobs like oil and filter changes ha ha.
They sell the tool in auto parts for about $8.
Hi,
Thanks for watching.
You can buy whatever you want, what industry make.
But can you make some useful tool for your own?
That's what is important!
Why pay $8 if you have the tools to make it for 50 cents?
@@michaelwalsh9145 right? Just buy so the other tools that cost much more to then only have to spend 50c 😂
@@MCTutorialsOnline, Yes, make it once. Own it forever...