QUICK Acura MDX Differential Fluid Replacement using VTM-4 Fluid from Honda
Вставка
- Опубліковано 9 лип 2024
- Amazon Links to Parts Needed:
Honda Differential Fluid - amzn.to/2SC4eNu
Honda Drain Plug Washers (18mm) - amzn.to/2GSIE6b
Honda Fill Plug Washers (20mm) - amzn.to/2XolrO6
Fluid Transfer Pump - amzn.to/2GX7T7x
Bottle-Top Style Transfer Pump - amzn.to/2EDgnOL - Навчання та стиль
The fill hole should be removed first before draining the fluid. If it stuck you are screwed. Do it the right way!
I was just going to make that comment. You're absolutely correct. Make sure you can refill it before you empty it.
Thank you , it was helpful
Good video , however recommend the fill hole first and ditch the impact gun steel plug vrs aluminum case we know who loses if you use two much torque on install
Thanks dude
Thanks so much looking easy Maricela Olmsted
What type of oil?
What year mdx?
Next time sand your crush washers with 1500 grit until its smooth
Why do you take down the spear tire?? you don't need do that use a smalladapter and then sewell extension...!!
And why do use the air impact gun to screwed the full plug??
Why you pull the drain plug first what if the full plug cant open what will you do ??????.
I've never had a plug that doesn't come out with a little persistence - if it is being difficult though, you can always hit it with some PB Blaster or heat (carefully!). To prevent it from ever sticking again, put a tiny amount of anti-seize on the plug threads before you put it back in, but be very careful not to glob on too much as you don't want any getting pushed into the differential
@@RandomMaker It's safer to make sure you can get the fill plug out before draining it.