How to Replace Spark PLUGS on 2006 Acura MDX

Поділитися
Вставка
  • Опубліковано 7 бер 2020
  • Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic
  • Авто та транспорт

КОМЕНТАРІ • 83

  • @geoffreyhowells4871
    @geoffreyhowells4871 Рік тому +1

    Recently purchased a 2005 MDX with cylinders 4 & 5 misfiring. This excellent video mustard-up the courage to replace plugs and coils myself. Thank you much for the great tutorial and walk-through.

    • @RBTheMechanic
      @RBTheMechanic  Рік тому

      Good luck! Yup let me know hit it went

    • @TheCamwil
      @TheCamwil Місяць тому

      Did it fix the issue?? Same problem in my 2005

  • @ELVISRN1
    @ELVISRN1 2 роки тому +5

    I like to do 2 things.....lube the plug threads for easy install and truer torque and die-electric grease put on with a q-tip on the inside of the boot for easier boot slide and click and of coarse to keep out moisture. GREAT VID!!

    • @ELVISRN1
      @ELVISRN1 2 роки тому

      BEWARE OF FAKE PLUGS ON E-BAY AND AMAZON.WATCH VIDS.

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому +1

      Nice tips

  • @beasignpost
    @beasignpost 3 роки тому +2

    Thank you! This was very helpful!

  • @dennisskelton5086
    @dennisskelton5086 Рік тому +1

    Thank you very much. You got the best video on this. You're great

  • @duboiss.p.i5985
    @duboiss.p.i5985 2 роки тому +1

    You saved me bro thanks for vid followed ya steps and knocked it out .

  • @sajflydragon970
    @sajflydragon970 2 роки тому +1

    Thanks man appreciate the help

  • @huynguyen-gt5um
    @huynguyen-gt5um 3 роки тому +1

    Good work sir.

  • @sebestiensoliz2075
    @sebestiensoliz2075 3 роки тому +1

    RB. Can you do a video on replacing the fuel filter on the 2006 Acura MDX Touring Package? I mean where is it, even?

    • @RBTheMechanic
      @RBTheMechanic  3 роки тому

      It dosent have fuel filter none serviceable there is a strainer on the fuel pump which keeps everything out from even enter fuel filter which works like filter no need to service

  • @mightymoe4635
    @mightymoe4635 3 роки тому +3

    Torque specs for the plugs on this car is 13ft/lbs.

  • @camilosatiro9126
    @camilosatiro9126 2 роки тому +1

    Very good stuff

  • @mtbknow-how3795
    @mtbknow-how3795 2 роки тому +2

    Yeah I have an 06mdx and currently getting about 10mpg. I think it's def time to replace her spark plugs and coil pack as well

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому +1

      Cleaning sensors might help as well oxygen sensors

    • @ecknowater
      @ecknowater Рік тому

      What sensors do you clean?

  • @fanfan58
    @fanfan58 2 роки тому +1

    wish you show live how you do the back spark plug replace

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому +2

      They are same as front same same the last coil at the end is blocked by the coolant lines u can slightly just push the line and coil just comes right out

  • @johne4056
    @johne4056 3 роки тому +1

    Hey RB, my 04 mdx has been having a power steering issue i think, and wanted to ask what component you think may be bad. Also had power steering flushed already. When you are holding a turn at over 15mph, the steering wheel "bumps" the other way, and (assuming you are holding the turn steady), will bump back to place. What could it be?

    • @RBTheMechanic
      @RBTheMechanic  3 роки тому

      John E can you make video of this and post it on utube I need to see this and also is there any noise comming when u turn

    • @gerardomorales4078
      @gerardomorales4078 Рік тому +1

      @@RBTheMechanic did @John E ever post/share a video for this? My 2002 MDX I just bought used in Puerto Rico DOES make a sound when I turn all the way to the left or right.
      Just curious if you had anything to advise him.

  • @kofrmthaland1634
    @kofrmthaland1634 4 роки тому +1

    Hey RB I have a check engine light on my Acura MDX 2006 my code says it's misfires and now it smokes out my tail pipe and now it's smoking from my starter because I kept trying to starter it. U just put a fresh batter in it

    • @JR-wn8cl
      @JR-wn8cl 3 роки тому

      This is your car ? Damn bro. That’s fucked up.

  • @joesalameh1084
    @joesalameh1084 Рік тому +1

    Great 👍

  • @anglegrinder4630
    @anglegrinder4630 3 роки тому

    will this procedure fix my error codes misfire 1-6? p.d.(pending determination) on all,or should i do a valve adjustment?money is tight so i can barely pay for 1..my best case would b to get a coil/plug package and DEFNLY do it myself,honda wants like 400 for a full tune up and all my liquids are fine air filter etc

    • @RBTheMechanic
      @RBTheMechanic  3 роки тому

      SuitLoops before you do this watch is this other video I have on Acura TL it was mid firing random cylinder you maybe have similar issues I can test by swapping coils

    • @RBTheMechanic
      @RBTheMechanic  3 роки тому

      SuitLoops here’s the link to that video ua-cam.com/video/_YC27w9CRKQ/v-deo.html

  • @kidz919
    @kidz919 8 місяців тому +1

    What are the tools you're using besides the wrench and flathead screwdriver?

  • @evanmeeden2222
    @evanmeeden2222 Рік тому +1

    Mine has an Issue with the VSA light turning on after about three miles of driving. IT drives well and doesnt pull to either side and the awd works jsut fine. Any ideas armano?

  • @henrykang6612
    @henrykang6612 8 місяців тому +1

    Thanks for kyour video. I have error code p0301 on 2004 Acura MDX. any idea to fix it.

    • @RBTheMechanic
      @RBTheMechanic  8 місяців тому

      Misfire cylinder 1 do tune up and coil change on cylinder 1

  • @kofrmthaland1634
    @kofrmthaland1634 4 роки тому

    And also in this video 14:14 that black box that not above the engine what it's that? My Acura does not have that plug on the right closest to the motor? What does that go to?

  • @chanobernal6884
    @chanobernal6884 2 роки тому +1

    What if the Spark Plug Feels or it is getting Stuck What should I Do?

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому

      Don’t brake it try put some penetration oil/spray and let it sink in for hour or so worst come to worst take it to shop

  • @A.Musa76
    @A.Musa76 3 місяці тому +1

    Where is the ant-seize on the spark plug threads?

  • @hectorsanchez2146
    @hectorsanchez2146 Рік тому +1

    This spark plugs don’t need to be calibrated?

    • @RBTheMechanic
      @RBTheMechanic  Рік тому +1

      U mean the gap? U can do that u should most plugs are like already at the oregano but u can spend extra 10 get the gauge and check the gap speciation for ur vehicle

    • @dannyzamudio1252
      @dannyzamudio1252 Рік тому

      ​@@RBTheMechanic whata the torque epecs for the spark plugs?

  • @joycecresser5884
    @joycecresser5884 2 роки тому +2

    What size socket fits the spark plugs on the accuracy mdx?

  • @anglegrinder4630
    @anglegrinder4630 3 роки тому

    its like looking into my engine well,these things all wear exactly the same

  • @TheFire1202
    @TheFire1202 2 роки тому +1

    Why not replace the coils as well?

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому

      Don’t need to unless they go out but it’s ur choice

    • @TheFire1202
      @TheFire1202 2 роки тому +1

      @@RBTheMechanic cool thanks, the vehicle is almost at 200k so ill do the coils. Great video

    • @TheFire1202
      @TheFire1202 2 роки тому +1

      @@RBTheMechanic My hands hurt from doing this. I'm 5"5 and had to use a ladder for the back ones. Your video helped a lot, thank you again.

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому

      @@TheFire1202 yup back ones I used oil box to step on

  • @robwells5753
    @robwells5753 3 роки тому +2

    Always always always use OE plugs . The engine wasn't designed/built with parts from NAPA

    • @RBTheMechanic
      @RBTheMechanic  3 роки тому +2

      I try to use NGK or denso but some customer bring their own stuff then I just got to do it

  • @r.m.6978
    @r.m.6978 2 роки тому +1

    Rb. If the check engine light blinks that's the engine misfiring

    • @RBTheMechanic
      @RBTheMechanic  2 роки тому

      Yup so u have misfire scan the car for code and check that cylinder for issues

    • @r.m.6978
      @r.m.6978 2 роки тому +1

      Thank you hermano

  • @Mr.3LC
    @Mr.3LC 3 роки тому

    Why didn't you show how you did the back spark plugs

    • @RBTheMechanic
      @RBTheMechanic  3 роки тому +2

      Mr. 3LC same process just the back camera angle is not good

    • @MrRoppppp
      @MrRoppppp 3 роки тому +1

      He didn't do the back

    • @RBTheMechanic
      @RBTheMechanic  3 роки тому +3

      @@MrRoppppp yes I did

    • @maryboni8658
      @maryboni8658 3 роки тому +1

      @@MrRoppppp Don't be a troll

    • @ELVISRN1
      @ELVISRN1 2 роки тому

      @@MrRoppppp coils were laying there from the back

  • @jamye2881
    @jamye2881 3 роки тому

    Why are you installing Ford plugs in a Acura

  • @klujics123
    @klujics123 Рік тому +1

    The dealer wants close to $300, they are crazy.

    • @RBTheMechanic
      @RBTheMechanic  Рік тому +1

      Ohh they crazy DIY bro

    • @klujics123
      @klujics123 Рік тому +1

      @@RBTheMechanic I was calling for the cost of a valve clearance adjustment (I have 325,000 on an ‘06 never had an adjustment) they told me with a new valve cover gasket it would be about $550 which was a lot less than I was thinking.
      They asked about doing changing the plugs told me (they like to do it all at the same time- I bet they do lol) it would be close to an extra $300.
      I used your video a couple of years back and had changed them myself.
      Thanks for the reply.
      On a side note every 7 years if you think back the market has had a down turn about this time of year. 80, 1987, 94, 2001, 2008, 2015, 2022? Of course some of those years are very notable others not so much. This coincides with the Schemata year, you can look it up if interested. But not sure about the future but if the cycle is true to form we will know in a few weeks. So might be careful with any investments until October to be on the safe side. Just something to consider. God Bless. Anything occurs feel free to reply back if you like… as I might have more to add. Take care.

    • @RBTheMechanic
      @RBTheMechanic  Рік тому +1

      @@klujics123 wow that lot of milages but it sure gonna need it I’m doing the valve adjustment on my accord very soon I will make video of it

    • @klujics123
      @klujics123 Рік тому +1

      @@RBTheMechanic what’s even crazier is I bought this from a guy who had all his service done at the dealer. They never recommended a timing belt… 306,000 is when that OME part was replaced. Though that does say something about the quality of Honda parts that it lasted that long. Take care.

    • @RBTheMechanic
      @RBTheMechanic  Рік тому

      @@klujics123 yeah Hondas last long time I got 2004 accord it’s still running original water pump I put in alternator in 2014 original from dealer

  • @kaylam6220
    @kaylam6220 2 роки тому

    Code P0497 need help 06 Acura MDX

  • @xtraCreamcheese
    @xtraCreamcheese 3 роки тому

    Autolites in a honda...ughhh

  • @kentsang6330
    @kentsang6330 11 місяців тому +1

    What’s the torque spec for the spark plug is same as 2003 mdx. Thanx

    • @RBTheMechanic
      @RBTheMechanic  11 місяців тому +1

      I believe it’s 13 ft lb

    • @kentsang6330
      @kentsang6330 11 місяців тому

      Thanx for the reply good 👍