Bought 2 of them. Passed up a chance to buy them at $110. Came back and they were $125. Went to purchase them at $135. Now they are about $150. Glad I only needed 2.
@@jeremyb251 Thanks for the heads up bud. I am looking to pick one up and when I saw the prices for these on other sites I couldn't understand why these things were so damn expensive. Especially since I can get a high end bcm or magpul stock for 60 bucks.
You said the reviews out there are miss leading and if that's the case anyone that knows an AR platform would already know how to get the stock or arm brace off a buffer tube. Sorry but that was lame and I'm just being honest.
Best review of this product on UA-cam!!! That’s a fact! Thank you for being so detailed; I appreciate such care and attention. This company would be wise to allow you to represent their products. I’m ordering it based on THIS REVIEW!
The company is going to go away without the atf being pushed back. It was a work around. If you have to register it anyway may as well just get a stock.
I have the clone version a guy on gun broker sells for 40 bucks with a milspec tube and castle nut I also have a real one that cost 129 didn't even come with a buffer tube. I can not tell the difference between the 2. I did have to wait on the cheaper one as the guy is in Canada and customs is slow. Even has the Sb logo on the back fits tight on a milspec tube.
Hey - I got this thing here I know nothing about and I'd like to tell you all about it. Too many people doing reviews of things with extremely limited knowledge and little to zero experience. Terrible as far as a review goes.
The silver pins fell out when I was shooting from recoil any clue what they are called so I can replace them? Now it moves forward once I shoot from the recoil kick pretty annoying and useless.
So there is no confusion since you mentioned it in the first few seconds of your video(and even though it’s a stupid law), you CANNOT use this brace on a rifle. You can use it on a pistol and then convert that pistol into a rifle and back into a pistol. Using this brace on a rifle will open you to a possible felony for possession of an SBR. Just an important clarification :)
wtf are you guys talking about you can use a pistol brace on a rifle there is nothing wrong with that puting an arm brace on does not shorten the barrel so how would you get charged with a SBR you have to have a 26 inch total length but minimum rifle barrel length is 16 inches plus rest of the upper receiver adds about 7 inches and a buffer tube adding another 5 or so you should be good
Would be an interesting development. The ATF defines a rifle as designed to be fired from the shoulder. But the ATF also says that a pistol brace is not designed to be shouldered, so what would a rifle with a pistol brace be?
so this is NOT really designed to go around your forearm. hint hint. shame that mfgs have to jump thru hoops just to make good products that improve safety and reliability.
Bought 2 of them. Passed up a chance to buy them at $110. Came back and they were $125. Went to purchase them at $135. Now they are about $150. Glad I only needed 2.
$105 at optics planet
150 with AR Pistol lower parts kits at Palmetto State Armory
79.99 @ Primary Arms August 2019
@@jeremyb251 Thanks for the heads up bud. I am looking to pick one up and when I saw the prices for these on other sites I couldn't understand why these things were so damn expensive. Especially since I can get a high end bcm or magpul stock for 60 bucks.
I hate all of you🤣 I am just now buying mine.
You said the reviews out there are miss leading and if that's the case anyone that knows an AR platform would already know how to get the stock or arm brace off a buffer tube. Sorry but that was lame and I'm just being honest.
Best review of this product on UA-cam!!! That’s a fact! Thank you for being so detailed; I appreciate such care and attention. This company would be wise to allow you to represent their products. I’m ordering it based on THIS REVIEW!
Thank you, brother! I really appreciate that!
The company is going to go away without the atf being pushed back. It was a work around. If you have to register it anyway may as well just get a stock.
They have these on sale now 2/16/2019 At Palmetto State armory w/ lower parts kit and magpul grip for 150.
Dang, good price
Got mine!
Why do all sell all thes without buffer tubes now
will a standard ar stock fit on the tube of this brace?
Yes lol
I have the clone version a guy on gun broker sells for 40 bucks with a milspec tube and castle nut I also have a real one that cost 129 didn't even come with a buffer tube. I can not tell the difference between the 2. I did have to wait on the cheaper one as the guy is in Canada and customs is slow. Even has the Sb logo on the back fits tight on a milspec tube.
I just purchased one from gb guy is also from Canada. How long did it take to arrive?
Hey - I got this thing here I know nothing about and I'd like to tell you all about it. Too many people doing reviews of things with extremely limited knowledge and little to zero experience. Terrible as far as a review goes.
Like that you’re not afraid to cover gun stuff when so may other youtubers are. Good stuff.
UA-cam sent out their new policies and they are ridiculous.
What buffer and buffer spring? Pistol?
I am wondering the same thing
Carbine buffer and spring is the same as for the pistol.
How do I find the definition of a stabilizer brace?
I don’t understand how this is legal if the buffer tube needed for this brace can also except a stock??
Does yours wiggle
Where the plastic part starts?
The silver pins fell out when I was shooting from recoil any clue what they are called so I can replace them? Now it moves forward once I shoot from the recoil kick pretty annoying and useless.
So it comes with the buffer tube, but we need to buy the buffer and spring separately? Carbine spring system or pistol?
Can this fit a commercial version?
Anybody know of a locking collar for a pistol tube that works with this brace?
I'm very confused. This says it is for a pistol stabilizer. I didn't think pistol grips can be adjustable. ??????
You can, its a brace.
I would love to hear, why not?
Can i put this model on my ar15 pistol?
I did
Good video! I think it's horrible how UA-cam violates people's civil rights and makes firearms contents sit at the back of the bus. It's such a crime.
Awesome as Always!!!🤙🏾🇺🇸🤙🏾🇺🇸🤙🏾
So there is no confusion since you mentioned it in the first few seconds of your video(and even though it’s a stupid law), you CANNOT use this brace on a rifle. You can use it on a pistol and then convert that pistol into a rifle and back into a pistol. Using this brace on a rifle will open you to a possible felony for possession of an SBR. Just an important clarification :)
Excellent point. Stupid, useless rule but excellent point.
You can use a Shockwave blade on a rifle if you add a buttpad, because that magically transforms it into a stock.
wtf are you guys talking about you can use a pistol brace on a rifle there is nothing wrong with that puting an arm brace on does not shorten the barrel so how would you get charged with a SBR you have to have a 26 inch total length but minimum rifle barrel length is 16 inches plus rest of the upper receiver adds about 7 inches and a buffer tube adding another 5 or so you should be good
Would be an interesting development. The ATF defines a rifle as designed to be fired from the shoulder. But the ATF also says that a pistol brace is not designed to be shouldered, so what would a rifle with a pistol brace be?
@@dr.burtgummerfan439 still a rifle taking a stock off of a rifle doesnt magically change it to something else even according to the ATF
Does this work on a pistol tube, or only with a milspec tube?
I believe the Milspec tube.
Mine wiggles so much it's fricken rediculous. Their moulding department needs to be fired along with their quality control.
105 on opticplanet
I have one I'm not happy with the quality and major wiggle it has
Fore armed!
so this is NOT really designed to go around your forearm. hint hint. shame that mfgs have to jump thru hoops just to make good products that improve safety and reliability.
Rules are often created by last people that should be creating them
Yes the arm opening is to small and the strap is to short
It went comply with the law
the strap comes off the top when you need it for an arm brace. then you wrap it back over the top for storage!!
nice Stock 😎
Why make an educational video on something you're not educated on..? It's 6 position...
awesome design until you intent to use it as an "armbrace" lol!
Illegal accessories is so bs. Disband the atf!