How to replace Sony Xperia Z2 LCD screen
Вставка
- Опубліковано 5 жов 2024
- OEM LCD Screen Replacement for Sony Xperia Z2: zegsu.com/s/di8rf
OEM Back Cover Sticker for Sony Xperia Z2: bit.ly/1EHtBW3
OEM LCD Supporting Frame Sticker for Sony Xperia Z2: zegsu.com/s/di8sw
Replacement Parts for Sony Xperia Z2 : witrigs.com/d2vmi
Here's the video to tell you how to change your broken, cracked and not working LCD screen of Sony Xperia Z2 quickly and easily.
Tools:
1. heat gun or hair dryer - zegsu.com/s/dj44c
2. Suction cup - bit.ly/1Mbid2L
3. Guitar plectrum - bit.ly/1E6tMWJ.
4. Spatula - bit.ly/1zlSaEG.
5. Phillips screwdriver - bit.ly/1BNDNcw.
6. tweezers - bit.ly/1IunSA2.
Witrigs offers not only mobile repair tutorial including disassembly, assembly, and components replacement guide, but also phone accessories review video on UA-cam.
Publisher: Witrigs - bit.ly/1Avo6o3
Witrigs UA-cam Channel - bit.ly/1HZTLkL
If you are interested in DIY phone repair or latest phone accessories review,
Subscribe Us on UA-cam: bit.ly/1xNoHlm
Follow Us on Twitter: bit.ly/1yIu32C
Like Us on Facebook Page: / witrigsphonerepair
Contact us on Facebook Message: messenger.com/...
Add Us on Google+: bit.ly/17oOFBN
Subscribe Us on Blog: bit.ly/14xGAJ6
~-~~-~~~-~~-~
Like Us on Facebook Page: / witrigsphonerepair
Donate now if you feel our videos so helpful. www.paypal.me/...
~-~~-~~~-~~-~
![It can do it all: Sony Xperia 1 VI [review]](/img/n.gif)
OEM LCD Screen Replacement for Sony Xperia Z2: zegsu.com/s/di8rf
OEM Back Cover Sticker for Sony Xperia Z2: bit.ly/1EHtBW3
OEM LCD Supporting Frame Sticker for Sony Xperia Z2: zegsu.com/s/di8sw
Replacement Parts for Sony Xperia Z2 : witrigs.com/d2vmi
My fiancée broke the screen on her phone and all of her pictures were on it. Managed to follow this tutorial to get the phone working well enough that we could get her photos back. Thank you so much for posting this.
Thank you! I have followed this video twice now to replace two cracked screens (silly me). The video explains it very clearly however two things to note - when you first remove the back there is a plastic tab underneath the top of the phone that you have to pull to release the glue. Secondly there is a small metal bracket around the left side of the speaker which needs to be unclipped and removed. Finally I would advice on disconnecting the antenna connector before removing the speaker (unshown in this video).
Thanks again!
Is it a 4g fone ...
Haha i did not read these negative comments before i fixed my phone. Replacement was simple as fakk. I will not going to test waterproof but my phone is fixed thanks to this video. It took like 45 minutes with slow workflow. No need to fear if you have brain and i aint some engineer. Just do it!
Dude is the replacement oem screen 1080p n 426ppi n how's the clarity n colour temperature?
Thanks for this vid, I was EXTREMELY careful about those fragile cables and it really paid off, phone is working and performing as it was when new. Thanks again!
Glad to hear that and thanks for your feedback.
Dropped it again! Cracked the screen again. Looked at your video (again). And (again) another success! Thanks!
Very good video! Follow the instructions and everything goes just fine. The only problem was that for some reason there was glue in the battery, which made detaching the back cover a bit difficult.
thanks, this was easy as expected!
took 5 days from it to ship from china to norway with dhl express.. and the screen was replaced 15 minutes after i got it :) thank u Witrigs!
Rasmusstol Is the phone still waterproof?
I bought all the stuff from your website and followed this video! :)
Thank you so much! It works :)
I miss my Z2. The phone was great during its time. Stereo speaker, beautiful notification LED. One of it kind. But sadly the camera was plague with overheating problems. I am probably going to fix mine soon and use it as music player. Fixed it more than twice but the screen still broke (own fault😂) . Thanks for the video!
Thanks! Cracked the screen playing carpenter, now puttin' Sony technician on the CV ;)
Big thank you for posting this vid! Brilliant!
This is a great video tutorial. Ordered my screen from you guys however i noticed some discoloration on the bottom right side of the screen but ill live with it ..not like i intend to go back in to change it even if you send a replacement !!
isso sim eh um vídeo demonstrando como faz, a velocidade do vídeo está perfeita e pelo fato de não ter comentários na hora do trabalho. parabéns.
People saying this messed up there phone No you messed up your phone by not following a simple video which someone has took the time to make to help you.......
Hey!
I followed your video step by step, and when I tested the phone, it wouldn't turn on although i managed to replace the screen correctly. I tried connecting the charger however only a red light came up. What do i do now?
Great, thank for this. Followed instructions and replacement went well.
Thanks for the guide! I bought my screen off eBay and just got the regular cheapie.. The colour vibrancy leaves much to be desired compared to the original but oh well.. I had an extra metal clip on the bottom left when removing the 'loudspeaker' section. If you don't know about this, then it can be easy to miss and a real pain. Overall, the hardest part for me was placing in the sticky stuff; you only get one shot.
+Aaron H I just finished reassembling my phone and I also had that metal clip left, didn't know where it was supposed to go so I just left it... now that i finished installing my new screen it works but... sometimes it doesnt recognize any of my touches
Replaced my screen, works very good! Have an issue though with the vibration. As soon as i connect the battery the vibration goes on until i remove the battery connection. Is there an easy solution? Pls help :)
Very good tutorial, I'm still trying to connect the very small pin from. The display back, you took only a few attempts while I'm sitting here for so long ahhh, it's driving me nuts
Hey! I accidentally dropped my Sony Xperia Z2, and the screen cracked. The display is fine but the touch screen (digitizer?) doesn't work - will it work after I've changed the LCD screen? Thanks a lot for helping :)
Is the replacement part provided original? I am concerned about the quality of the display, Will it be the same as the tri - luminous display offered by Sony?? I am resident of India, Where can i buy the replacement parts??
The screen we offered is original which is the same as your old one,www.witrigs.com/oem-lcd-with-digitizer-for-sony-xperia-z2. Witrigs can ship it to you.
Great instruction! Thank you very much!
Thank you so much, my z2 is working perfectly now
Thanks for the detailed video! Was able to replace my phone's screen successfully.
Amazing I will try to repair my old z2
Ossam video brother it looks very easy to do now
Really helpful Video. Thanks for your video, I replaced my Sony Z2 by myself.
Thanks a lot! Saved me a lot of money!!
Nice video, but i have a question.
After this replacement, is the phone still waterproof?
i dont think so. after peeling off everything on edges....
as water proof as from factory.. but heres the thing.. they arent waterproof. mine wasnt from factory. it just broke. ofc no warranty on water damage. just do never use a "waterproof" sony around water. its just a marketing gag
Im washing it sometimes. Of course not too long time. But I do wash :)
Maybe on your Sony, idk where from you bought it, but mine and my girlfriend's Sony Z2, is waterproof and one night, for about 25 minutes, my phone stand in a glass of beer with wine and it works with no trouble after 2 hard years of droping on the floor. Sorry for my bad english! Peace!
I used mine to go swimming in the ocean and film it though..
well, i cracked my z2 screen and replaced it in a local workshop, now it is working but is the phone still waterproof or not ?
Bought. Installed and happy.
Can you tell, these sticks are use for waterproof ? Wit Rigs
I hope I never have to come back here and really use this video. What ever happened to screws?
Could you use a hairdryer to heat the front panel and realign it to fix gaps without any issues? Thanks
Hi, great video. My Xperia z2 seems to letting water in from somewhere, as the camera has gone cloudy. The phone still works fine. Do you think it's worth replacing the adhesive? But is it likely the damage the screen in the heating process?
Thanks
Luke Tench We recommend u to disassemble the phone for wiping the water.
Hi, what kind of equipment do you use? Is there any problem if the kit is cheap?
One thing you might not see here is how careful you need to be when you are removing the speaker assembly. I stuck my prying tool right thru the thin ribbon cable down there and had to buy a new flat connector thingy setup.
I've just had my screen replaced and although most things work, the double tap to wake up doesn't and also when typing it sometimes has a mind of its own and lastly when I ring someone and take the phone away from my ear it's suppose to light back up but doesn't and so proves to be a nuisance when trying to end a call or so. Any advice thanks.
Thanks for the video. I just broke the screen on my Z2 (badly shattered on the front). The screen is not non responsive but all buttons work and the phone seems to work fine (power button, volume, camera). Will this repair fix my issue?
Yes, it will help.
Can you do a screen replacement video on the xperia 1?
Hello, I replaced my screen yesterday, but when I press the bottom of the screen, near to where the connectors are, the screen gets glitchy and strange. Is there supposed to be contact between the back of the backlight connector and the phone metallic carcace or should I use adhesive to isolate then?
I did same to my z2 but one question plz.. I have one problem.. When someone call me he doesn't hear me until I open the speaker.. So what is the problem? Which part i need to replace too?
Thanks for the instructional vid. fixed my phone
Hi, do you know which connector exactly answers for touchscreen responsivenes? I replaced mine using this guide, the phone turns on but touchscreen is not responding at all. I might have broken some connection link flex? Do you know which one is it? Thanks
Does the package include the original adhesive? or is it sold separately? Great video by the way!
Jude Bryan Fullente hi, all the replacement parts for Z2 is sold separetely including the original adhesive. You can check up www.witrigs.com/sony-xperia-z2-replacement-parts and find what you need.
I drop off my phone sony xperia Z2 in the ocean when i went to swim there .. and the phone at that moment does.nt working is off BEfore 1 week ago .... can you give advise what can i do with it ??????
Hello, is there any possibility that damage to the battery ?
because the phone heats to high temperatures during the warmer this item . if the battery gets warm it may later come to an unload faster or be weaker ?
Hello. I did everything as you explained in the video, but I have a problem because the display goes crazy and starts to open the application after a minute or two, without my touching the display (ghost effect). What's the problem? To note, I still have not put adhesive screen because I wanted to test it before putting the display.
Sorry to hear that. But it seems there is no exactlly effective solution. From the Sony forum talk.sonymobile.com/t5/Xperia-Z2/GHOST-touch-problem-Z2/td-p/663333/page/2, many z2 users have the same issue but can't solve it perfectly. If your ghost screen doesn't occur too often, just ignore it. But if it troubles you too much, maybe you should ask the professional for help.
that's a lot of views. good video. no wasted time.
yea, no mumbling sound like all other tutorial i hav watched so far
Thanks for the video. Help me a lot to change the screen
Dude is the replacement oem screen 1080p n 426ppi n how's the clarity n colour temperature?
Hi there can you do a video on how to replace a Sony Xperia z2 digitizer
omg i asked a technician to replace my lcd and digitizer?(for touch). i watched him doing it i don't dont know why i saw him putting back the camera and other small parts because watching your video it looks simple and not even touching those parts above especially the camera. cause i noticed my camera is not as good quality as before. :((
Hello,
After dropping my phone on the floor and smashing the screen, I have just replaced it using your instructions, everything went well and the touch screen works, but the screen won't show any picture, it is just white. I can hear the sounds, it vibrates and everything, just will not show anything on the screen. Any ideas where I might have gone wrong?
***** Reconnect the connector of LCD. And make sure you get a good screen. If it is still show nothing, the worst thing is that there is some thing wrong with the motherboard.
Hi there! Nice tutorial! I had my screen replaced professionally 2 days ago, it works, but I noticed the screen sometimes doesnt respond to touch. If I run a touch test, every 10 taps, 2 or 3 won't register. Is this a problem with faulty cable connecting or a defective screen? Will opening it and re-connecting the cables work? Thanks!
AJ Sarmiento Reconnect the LCD screen and digitizer cables.
Nice video. However, the person that was replacing the screen was wearing an anti static bracelet, but it was not connected to the grounding lead throughout the whole video and so it was not protecting against static discharge. Unless you were wearing it as a fashion accessory, you may as well have not worn it at all.
Big thanks for helping me like this way
Thanks a lot ! Worked great and very easy
Hi I have sony xperia sp and it fell on the floor but the screen didnt crack on the outside. But something obviously broke since on the screen it shows only some lines in different colors on a gray background... would it help if I replaced the screen like this? Thank in advance, I really dont know much about this
My screen has become black (lit up) everything working fine (sounds vibrations I can even unlock the screen n play music without display).. I dropped it accidentally and this happen. Should I replace the screen or is there any way to repair the same one??
Hi, thanks for your videos, I have a z2 compact with a cracked screen, would I replace it following this video, or your video for the z1 compact which removes the screen from the front? Thank you ☺
Hanah Cannon Z2 Compact? Sony has not a phone, named Z2 Compact. Any other name?
Hi.. ive changed my screen as you have done but the screen doesn't come on.. its stays blank but the phone is on because when I press the dedicated camera button it flashes and captures and makes the sounds. .. that's all the phone is doing. . Any ideas.. thanks
Thank you! Video made my replacement easy!
After I replaced my screen the cameras have stopped working correctly. The back one does not show up at all, and the front one shows lines vertically on the screen? Any ideas?
but will it be waterproof after doing this?
+fuumar Hudson hard to assure its water resistance after a DIY repair work.
Does this use the same quality of screen? IPS LCD?
hi, is it possible to replace only the digitizer?
Is replacing the Sony Z1 screen roughly the same process? Thanks
Also how come you remove the Z1 motherboard to replace the screen, but not on the Z2?
Hi, I have a problem with my phone there is a part of the screen that I can't click on it. The rest of the screen works perfectly fine but that small part is basically dead. I'm planing to try changing the screen by myself but where can I buy that thing that is blowing hot air? And how u call it? Thank you so much.
Danny Merida You can get the original lcd with digitizer at www.witrigs.com/oem-lcd-with-digitizer-for-sony-xperia-z2. All tools and items you need are showed at the page. The phone should be heat up while repairing. You can use heat gun or hair dryer.
used this vid...worked a treat. Thanks😀
What is the difference between the lcd screen and the non lcd screen?
Nice video, but i have a question.
Hi, I have done everything in the video, but when I turn the phone on, the screen stays blank, is there anything you can think of that I may have done wrong and need to check? Or is there any way of telling if I have broken a part? Thanks
Plz check if the LCD flex and the digitizer flex have been conneted correctly in the place.
After repair sticking adhesive sticker
Is that can protect water proof like brand new phone
Pathum Sumanasena No!
What to do for that
Pathum Sumanasena find something to seal it with. Run a continues bead of superglue around the entire edge on the front and the back. That should fix it.
There's a metal casting on the dark orange film where the loudspeaker is, and I can't get the corner to come out.
Is it possible to change only frame between lcd screen and back cover?
I'm asking because mine frame cracked and xperia is bended
tht is very good video and subtitles, thank you!
i broke my screen today and now the touchscrean doesnt work at all anymore but i think the rest of the phone works just fine. will a display change also fix the not working touch?
4310samir Yes. The display contains LCD and digitizer(touch).
what is the temperature and air setting and time to heat up ?
Worked. very easy. Thanks
I've cracked my Z2 screen and to get it repaired at a shop is very expensive ! Do I need the LCD thing as well as the digitiser , or could I just buy the digitiser and fix that ? Sorry if that sounds stupid
sincethethird It is hard for professional repairers to separate the digitizer from LCD screen without any damage and combine them successfully. So we usually recommend to replace the LCD with digitizer if one of them is broken. The LCD with digitizer replacement part is here and you also can find all tools and adhesive stickers you need on this page :www.witrigs.com/oem-lcd-with-digitizer-for-sony-xperia-z2 .
DIY repair or not depends on you.
hello what happens is that since a few days ago my z2 does not serve the tactile image but is in black, some solution or tap to change the display cell had been wet before inside
I want to replace the Microphone but I can't find it, could you tell me where it is?
Please help,I did it ,but then I tried to take a photo with camera but camera is off! I cant take photos it's black . I dont know where I did a mistake....what would it be?
Merci pour votre vidéo cause de vous j'arrive changé mon écran
watched just now thanks
The problem is not small, because after 1-2 minutes it starts with the ghost effect. It is not usable until the lock button is pressed again and unlock the display. I just bought a new digital displays and connect as it according to the instructions in the video you posted. The display works, the display color is fine. It seems to me that is a little slower response compared to the original, but it's okay. But the ghost effect is killing me. For now, I did not put adhesive tape and I'm not completely tighten the screws. Does it have something to do with the ghost effect?
It would be great if I could solve the problem with Ghost effect. :(
Compliments for video. It is very useful.
Best regards!
Sorry, there has not been an exactly effective solution to the ghost effect.
Hi.,What about the heat-gun Temperature for remove LCD..Thanks in advance
+Fahsul Imran It is about 100-150 degrees Celsius.
muito bom amigo. Você me ajudou a montar o meu. troquei acompanhando o vídeo
is it possible to heat up back and front cover, also with a hairdrayer, cause I dont have any other "heating possibilitys" at home :/
Hi, Dear omgmeinnameistnifrei,
Yes, you can heat up back and front cover by a hairdrayer.
I lifted the edge of the back cover and got around it with the plectrum. But the back cover seems to be stuck to the battery in the middle or something? When I try to pull the battery comes with it, I don't want to pull my battery out! Is this normal? Any hints? Thanks!
robinski Ok so I got it off, but the back cover was superglued extra hard onto the middle of the battery? This shit cray
Hi, I'm from Brazil. I have a question.
What is the temperature that you used to take off the seal with the hot wind machine?
Could you answer me? Thanks
Lucas Peixoto Heat up the adhesive at 150 degrees for 3 minutes by heat gun. Try to disassemble. If it is hard to open the phone, you can adjust the temperature or time and try again. You can use the hair dryer but it is hard to control the temperature. Do not stay one place too long when heating.
Wit Rigs ok, thanks for your help!
Wit Rigs my touch screen has been broken I asked many of maintenance workers in my country and they all have same answer " we can fix it but not waterproof anymore"
so what should i do?
I really need it back and waterproof
To make the phone waterproof, it asks for professional skills and original replacement parts. But no one can make sure that only if it is fix by the original plant.
Muito bom o video! me ajudou muito, abrir um determinado modelo de aparelho pela primeira vez é sempre meio assustador. Obrigado.
Are Z2 screens compatible with Z3 phones?
Kevin Yeoh no ,both has a diffrent flexible
my Xperia z2 is completely smashed on both back and front screen after falling from hands several times. But after watching this video, I purchased a new screen and back panel, which I replaced and it finally worked like new again. BUT I AM NOT GOING TO TEST IT'S WATERPROOFNESS AS I AM NOT GOING TO TAKE ANY MORE RISKS WITH THIS DEVICE
Hi
Can you plz help . I broke my phone's screen and bought a replacement screen. Its only the front glass not the digitizer . Plz can you guide my through so I can it fix ? I don't know if I need glue ??
Regards
It is difficult to glue the front glass and the digitizer together. You need the professional maintain merchinery for help, otherwise your screen may occur some yellow lines or bubble. You'd better buy the LCD with digitizer to replace it. You can glance here www.witrigs.com/oem-lcd-with-digitizer-for-sony-xperia-z2 to get more details.
Hi, i have one question for you. When you return back glass to the phone, is need again heat back glass or no? Thanks!
Josip Meaški No. You need a new back cover adhesive sticker to put the back cover back.
Wit Rigs ok. I have the new back glass and adhesive sticker. Thanks for response!
Hi my ph is bought from one provider but I have another network suppling my data and other plans.
When i started up my ph it has the original start logos and sounds please how do I delete these
is purchasing the sticker absolutely necessary because I need the phone working by a specific time and the shipping times are too long and too expensive.
Julia Benjamin Different types of shippment asks differtn shipping time and cost. Plz contact us via support@witrigs.com to check out details of your purchase.
hello i have z2 but when i put it in the water stoped work, now not working . how can i turning on ??
I'll do it...need my baby back, looks easy.