hey guys don't do like this he pick the main canera from the lens and the connectors have a small black things that lift up and then they cone out easy and not with tweezers because you can damage the flex,and first thing to do just disconnect the battery because you can touch something on the motherboard and you can make a shortcircuit.With all of that nice job my friend.
good work on removing the front camera!!!!! you might want to lift up the little white tab to allow the flex to removed, rather than just tugging on it, a very easy way to create damage
hey what is the use of part in video at 6:42 minutes please reply.I have given my phone for screen replacement but after replacement when i saw that part was changed by another one which is welded in main flex.
Helo sir, may you assist me! What is the parts name when you release the LCD screen connector to the main flex (8:17 of the video) I lost that small parts, how will I buy it in lazada?
hi i have an xperia z2 that the outer framing has snapped due to excessive force ie being sat on. the digitizer and lcd are in working order but however the back is smashed and the frame could be in two parts at any point i dont see a fix for this in any of your videos so any replys would be much appreciated, thanks
+Haldi4803 That's true. But we didn't have the sd card at all in the mainboard before the teardown, so there is no need to have such a step in this video.
Hello, when I put the back cover, am I forced to put new stickers? The old ones already on the window are no longer good? I want to put the back cover directly without putting glue or new stickers, is it possible? I know that I will lose water resistance by doing this but I am in a hurry right now and I can not have stickers for now
is there a way to fix a flexy cable if it snaps, I broke one of my yellow cables and my screen doesn't display anything when it turns on, any suggestions
+Aditya Kulkarni The phone can only remain waterproof when it is repalced by the professional with origianl repalcement parts. But it can't be 100% sure when it is just replaced by DIY repair work.
I might try and get a Sony Xperia Z2 off eBay or something then try and replace the motherboard as I have a motherboard from my old Z2 that I used in 2017 which broke that same year and that motherboard has not been used in 6 years
Which glue bottle is best to use for assembly the back panel? and when are you releasing the assembly video ? and thank you for this video! i learned a lot !
+Elvira Rafikova no, the back cover sticker is disposable,after you disassemble your back cover, you have to get a new adhesive to reinstall the back cover.
+Elvira Rafikova NO, the old adhesive on the back cover is no longer sticky enough anymore, you need to use the new adhesive so that you can attach the back cover back to the phone tightly. You can buy such adhesive here: www.witrigs.com/oem-back-cover-sticker-for-sony-xperia-z2 . It doesn't need to be heated.
Thanks for the video. I have know broken glass for the second time. What is taped to the rear glass on the inside? When im bought a new glass replacement this part didnt come with the cover. What is the partsnumber, and where can i get it brand new?
No. But when you use after a very long time, it may get worn and the ring of the waterproof adhesive sticker may fall off more or less, so the water resistance may weaken. Be careful.
Smontare un cellulare e dei circuiti stampati con delle pinzette a punta in acciaio ? Se si vuole finire di rompere del tutto l'apparecchio mi pare un buon sistema.
Mohamed Magid No, it isn't. Only it is replaced by professional phone maintenance personnel with original replacement parts, can the phone be waterproof again.
nice work. but can you please tell me where is the magnetic sensor (compass sensor) because my main flex cable is damaged that the vibrator and the magnetic sensor are not working please answer asap.
Mohammed Alsultan Do you mean the magnetic charging port can't work? The vibrator is connected with main flex cable. So it will be not working if the main flex cable is broken. But the magnetic charging flex is a independent component. www.witrigs.com/oem-magnetic-charging-flex-for-sony-xperia-z2
No I meant that the magnetic sensor ( the compass sensor) as I said above.I'm asking is the sensor connected through the main flex cable or is it in the mother board? Thanks in advance.
hello what happens is that since a few days ago my z2 does not serve the tactile image but is in black, some solution or tap to change the display cell had been wet before inside
yes same problem here, few days ago i went swimming and take a photo with my xperia z2, then suddenly i notice there is condensed water inside (i look at the lense, and yes there is some water inside). after that my z2 still work but when i left the battery uncharged till 0% it could not turn on anymore only black screen and boot logo for not more than a second, i've tried some solutions on internet such press reset button, power + volume up button, but nothing change at all. whenever i try to connect to PC, nothing detected. the only thing turn on now is only the LED lamp with red when i keep charging it. so i wondering i should remove the water inside. Could i do that?
The primary mic of my z2 has stopped working. I wish to get it replaced. Can u tell me exactly where it is situated. Is it the main flex? If yes, do i need to replace the whole main flex or just the mic. If no, please tell me the time in the video when you were dissembling the mic. Thanks.
Absar tariq Hello. The mic locates in the main flex cable. If the mic is broken, people can't hear your voice while making a call. You have to replace the main flex cable. www.witrigs.com/oem-main-flex-cable-for-sony-xperia-z2 . (6:42)
+Olsun Yes, but you will lose the nfc function. If you want the nfc function back, you can put your old nfc to your back cover, or you can buy the new nfc antenna like this: www.witrigs.com/oem-nfc-antenna-for-sony-xperia-z2 .
Hello, I have been looking for a replacement microphone on your website but i cant find it. I also didnt see the microphone in the dissasembly. How do i replace it and do you sell it? Thanks in advance
+Ben Grossen the microphone is on the main flex cable www.witrigs.com/oem-main-flex-cable-for-sony-xperia-z2, if you need to replace microphone then you have to replace the main flex.
Is it posible to take the antenna cable from this phone and place it in Z3? Since my antenna in Z3 is damaged... or maybe even some earlier once? For example Xperia Z to Z3?
Thanks for the video. I want to disable the touch screen. I think I can do this by pulling out one of the LCD cables you showed in this video. Can you help me identify which one please
The power button and volume of my Z2 are not working, I reutilizei the flex cable that was another frame, I need to buy another flex or I messed up the installation?
hi...very informative video though i'm not sure if this is sanctioned by sony. is the battery pack for xperia Z2 readily available in the market? or is it only available in sony outlets?
Hi, thank you so much, very nice video! I did open my phone, Sony Z2, I removed everything just like in the video (+ I opened the front side as well) and then put back everything. Now when I try to start the phone it just blinks 3 times in red and won't start? Apperently something wen't wrong, can you help me? :/ btw I connect the phone to the charger and it doesn't help, so its not the battery... :(
Hi, my phone just died and the only thing it does is flash red from the status LED once per second. This happens only with the USB charging method. No other signs of life. I did nothing to my phone (no drops or spills on it) it was working fine and then it just died. I saw that SB suggested that I disconnect the battery and because Sony doesn't care about my problem I decided to try this. So I have 2 questions: 1) How do I glue this back together once I separate the back with the same protection? 2) What does the Z2 back cover sticker do?
I've got one question. I accidentally dropped my Z2. I'm planning to buy a complete housing, new adhesive and back cover (mine was damaged, and is not water-proof anymore). The phone itself is 100% working, but this annoys the hell out of me. What are the chances to get it to be water-proof again?
hi I replaced my cracked Z2 screen using your excellent youtube video. The new screen looks great and everything on the phone works except the wireless charging port. I didn't think to check this before putting the back on the phone. I only removed the battery and the bottom of the phone so I am unsure what has happened. Is there anything I can try without removing the back again, which was very tight. Many thanks :)
hello very good video.i have a problem ,i have disassembly the phone but when i have reassembly i have lost one piece and i dont know how i must put it .thanks
my z2 dont take calls anymore or recieve calss,text because it was dropped even though it worked before and its unlocked whenever you put a sim card in it shows the network and signal bar you wont able to make,receive calls,text what ever so whats the problem here any suggestions?
Wit Rigs yes it's unlocked I tried it with many sims but don't work when I first got the phone it was working fine but since I dropped it I wouldn't able to make calls or receive calls or SMS,text even though its connected to a network and the signal bar is showing something inside damaged but don't know what it might be.
do you have a video showing how to replace the magnetic charging connector like this www.witrigs.com/oem-magnetic-charging-connector-for-sony-xperia-z2? is it glued to the phone chasis? does pushing it from the inside will pop it out? i really need your help because mine is broken and i cant use the usb port to charge my z2. thanks
I have a question about this my friend. I have a Z2, it was sumerged in water 20sec and now the screen doesnt turn on!!! The phone is still working with sounds and everything else but i got a black screen. When i turn on the phone i can barely see the sony logo, but it is all. Do i need to change the screen? Or send it to clean it, since a had another phone that was in the same situation and i cleaned it myself and it survided. Please answer. Saludos desde Peru amigo. Eres un genio!
No men, I could barely see the system, the UI but it was just for few seconds, then what i only get was the sound. Besides, now I can turn it off by guessing where the menu bottoms are. The system is ok, but... the screen... Do you think the flat is wet and that's why i cannot see anything?
Andres yo tenia un xperia z y resulta que estos telefono se recalientan demasiado y la parte de atras va perdiendo el adesivo y se levantan un poco por alli le entro agua al mio y le paso eso con la pantalla pero luego de varios dias o semanas volvio a la normalidad puede que esto le haya pasado al tuyo I was a xperia z and this phone has some problem with the glue in the back side, it lose when it turn hot. The water get in to the mine but it go back to normal after several weeks may be it happend to yours
hahah at least now i am not alone ;D This can be fixed with an update! I did my research and it most likely a software issue bro! Did you test it underwater? Because this may caused a problem! But it gets fixed usually after a few hours... Anyway keep me up to date :D! I am gonna tell you if my problem fixed!
the only thing i wanted to see was how it is around the part in wich i plug the cable to charge, because my phone is day after day harder to get to charge ON, i plug the cable in and out till it's finally works, but today, i failed XD ... and i can't turn it on anymore, just wondering if i can do smthing by myself, or is it dead ? : x
Cable is working, the usb connector is dead then, does it really needs any welds to be done ? that's what i've been told when i called a repair center :x
Hi, great movie. I dropped my Z2 and the back glass broke, but it was still usable, but after a while it lost signal and could not connect to the network. Wi-Fi, bluetooth and NFC worked properly. I ordered white back glass and repair kit and used your video to take me through it. The glass is now changed and looks great. But the phone will still not connect to the network, while I was "in there" I checked the RF cable. I disconnected it and connected it again, but still no signal. Do you have any idea what may cause this and how to fix it?
Hussam Ozee The original back cover costs $23.95. And the custom one costs $12.99. Xperia Z2 replacement part : www.witrigs.com/sony-xperia-z2-replacement-parts
I have faced the same issue then I was able to fix it by removing the vibrator and speaker housing and checked the 2 pins that connect the secondary antenna to the frame.align them to be connected to the frame again. hope this will help.
+Jack Henderson yepp!! i ordered this "Splitterpinzette Feilchenfeld - Pinzette spitz - extra feine Spitze - Edelstahl www.amazon.de/dp/B004PH432K/ref=cm_sw_r_other_awd_Ym7gxbV9CEWDE " and it was a bit tricky and you need to be very careful. it took me a little. since i tried to remove it with a hairpin before and it slid in even deeper. but i got it back! :) good luck to you!!
My Sony z3 was broken a little I should change or not
10 років тому
Hi I have a problem my z2 is having problems while charging, at the begining it's charging normally but after a few minutes it's start to disconnect and not load, this issue happens to me in both the magnetic and the usb port
Really good video, it helped a lot, but I have 2 question: Where is the primary microphone? Where is the secondary microphone? It's important to me, I think I need to replace both. After my phone broke, my mics are terribly noisy.
+Félix Johan Rojas Medina The primary microphone is on the power flex cable, and there is noise-canceling mic on motherboard. If I were you I do a "1 week test" without the noise-canceling mic. Turn it off, and use your phone for 1 week with this option. With this you can test which mic you should replace. If your phone is OK without the noise-canceling mic, you should replace the MOTHERBOARD. If your phone still doesn't work, there is a problem with your main mic, so you should replace the POWER FLEX CABLE.
My z2 started heating up today by itself. I just cliked to see time and it was like a heat wave hit my phone. It started at the back of the left corner. I turened him down and it was fine. But when i do something on him it's burning. Can anyone help?
my back cover of z2 is broken into pieces. i need to replace it but dont know here it buy it from, anyone can suggest please? white color z2 it is, anyone from India, please!
Hi i have a question the gold screw near the h/free connector it plays a role?
hey guys don't do like this he pick the main canera from the lens and the connectors have a small black things that lift up and then they cone out easy and not with tweezers because you can damage the flex,and first thing to do just disconnect the battery because you can touch something on the motherboard and you can make a shortcircuit.With all of that nice job my friend.
good work on removing the front camera!!!!! you might want to lift up the little white tab to allow the flex to removed, rather than just tugging on it, a very easy way to create damage
hey what is the use of part in video at 6:42 minutes please reply.I have given my phone for screen replacement but after replacement when i saw that part was changed by another one which is welded in main flex.
lol
Helo sir, may you assist me! What is the parts name when you release the LCD screen connector to the main flex (8:17 of the video) I lost that small parts, how will I buy it in lazada?
Thank you very much!! I just dropped my phone real bad, and the parts just flew out. Now I know where everything belongs!! Thankss!
watch 4.00 front camera removal watch how he pulls that poor ribbon cable without lifting the security thing on the connector, total begginer wtf
was looking for this exact comment :/
tienes que levantar el seguro de color negro por esta situacion es dificl la extraccion buen video.
cata stefan First thing i spotted also!
Was just about to say
ME TOO. STOPPED WACHT AFTER THAT.
Hi,
At 07:50 when the Attention appeared, what is the adhesive name or part number....
Thank you
The strong one at the corner
محمد الدوسري It may be the 3M sticker
hi i have an xperia z2 that the outer framing has snapped due to excessive force ie being sat on. the digitizer and lcd are in working order but however the back is smashed and the frame could be in two parts at any point i dont see a fix for this in any of your videos so any replys would be much appreciated, thanks
I have the same problem that's why i am here
4:00 did you forgot that there is a security flap on there?
IMPORTANT note: Unplug the microSD card before unmounting the Mainboard -.-
+Haldi4803 That's true. But we didn't have the sd card at all in the mainboard before the teardown, so there is no need to have such a step in this video.
Hello Wit Rigs, do you have instruction on how to replace the power button?
Hi, my Xperia z2 has steam in the camera lens, or in front of it anyway, how do I get rid of this?
Z4IN93 put it in a bag of rice
its so funny when it says remove flex carefully and then op starts digging the flex glue with metal tweezers xD
Have you done a video specifically on removing and replacing the MicroSD card reader port on the Z2 please? Thanks.
hey there Wit Rigs..i'd like to know if the silver ring found around the headphone jack is missing,, will the phone still be water tight?
What kind of adhesive do you think is used for the water sealing between the back cover and the sides?
Daniel Zhuk It is the special back cover sticker:bit.ly/1EHtBW3;.
hello sir, do i have to go to the same procedure if i want the power button to be replaced only
? tanx
Hello, when I put the back cover, am I forced to put new stickers? The old ones already on the window are no longer good? I want to put the back cover directly without putting glue or new stickers, is it possible? I know that I will lose water resistance by doing this but I am in a hurry right now and I can not have stickers for now
Is there any room inside the back cover for a qi coil?
is there a way to fix a flexy cable if it snaps, I broke one of my yellow cables and my screen doesn't display anything when it turns on, any suggestions
What would be the fastest/easiest way to acces the proxymity/light sensor?
Will the cell phone remain waterproof even after replacing the touchpad?or will it require any other special care to be taken?? please reply
+Aditya Kulkarni The phone can only remain waterproof when it is repalced by the professional with origianl repalcement parts. But it can't be 100% sure when it is just replaced by DIY repair work.
I might try and get a Sony Xperia Z2 off eBay or something then try and replace the motherboard as I have a motherboard from my old Z2 that I used in 2017 which broke that same year and that motherboard has not been used in 6 years
You can check it out by going to witrigs.com.
when you first open it, what are the connectors on the back on the rear cover? It looks like a panel that isnt on the replacement cover. thanks.
Chris Smedley It is the NFC chip sticker. The new back cover comes without it. So you need to reuse it when replacing back cover.
Wit Rigs
Ah ok, thanks for the reply.
this is so satisfying to watch
sent
So what about gaps in speaker grills? Will that harm speakers and phone?. Are the speakers waterproof itself like the mini jack port?
Dragisa Mastilovic The speaker grills located on the middle housing have been waterproofed. And the speakers can't waterproof itself.
if the plastic that surrounds the edge of the screen unsticks after an accident fall, do you lose waterproof?
No, it won't.
Wit Rigs I
what is the heat and air rate you use to heat up the phone to remove the cover ? kindly tell me pls
Sudheer M.S Use about 150 degree and the strongest air of our heat gun for 3 minutes. And try to open the phone.
Which glue bottle is best to use for assembly the back panel?
and when are you releasing the assembly video ?
and thank you for this video! i learned a lot !
Hi,I have a Sony Z2 and a question:
If I want to change my back cover(you know),after the repair my phone can be waterproof?
What kind of adhesive should be used for the assembly of the back cover? Silicone?
It can be the 3M adhesive sticker.
thanks for the video. If I open the back cover (which is ok), will I be able to put it back just by heating, without changing the adhesive?
+Elvira Rafikova no, the back cover sticker is disposable,after you disassemble your back cover, you have to get a new adhesive to reinstall the back cover.
+Elvira Rafikova NO, the old adhesive on the back cover is no longer sticky enough anymore, you need to use the new adhesive so that you can attach the back cover back to the phone tightly. You can buy such adhesive here: www.witrigs.com/oem-back-cover-sticker-for-sony-xperia-z2 . It doesn't need to be heated.
Thanks for the video. I have know broken glass for the second time. What is taped to the rear glass on the inside? When im bought a new glass replacement this part didnt come with the cover. What is the partsnumber, and where can i get it brand new?
That is the NFC. We have no this replacement part now, but if we have found one, we'll make contact with you immediately.
if i remove the back cover, will the waterproofness gone? or there are another way to make it waterproof again? thanks !
If you use the headphone jack too much, will it let water through?
No. But when you use after a very long time, it may get worn and the ring of the waterproof adhesive sticker may fall off more or less, so the water resistance may weaken. Be careful.
Smontare un cellulare e dei circuiti stampati con delle pinzette a punta in acciaio ? Se si vuole finire di rompere del tutto l'apparecchio mi pare un buon sistema.
If you replace the back one time, does the phone lose its waterproof?
It won't lose, but it may not work well to be 100% waterproof. So after you replace the back, be careful.
ADESH007 I oo
Plz answer me ist going to be water proof again plz answer
Mohamed Magid No, it isn't. Only it is replaced by professional phone maintenance personnel with original replacement parts, can the phone be waterproof again.
Thank you very much
nice work. but can you please tell me where is the magnetic sensor (compass sensor) because my main flex cable is damaged that the vibrator and the magnetic sensor are not working please answer asap.
Mohammed Alsultan Do you mean the magnetic charging port can't work? The vibrator is connected with main flex cable. So it will be not working if the main flex cable is broken. But the magnetic charging flex is a independent component. www.witrigs.com/oem-magnetic-charging-flex-for-sony-xperia-z2
No I meant that the magnetic sensor ( the compass sensor) as I said above.I'm asking is the sensor connected through the main flex cable or is it in the mother board? Thanks in advance.
Wit Rigs I would also appreciate it if you could tells us where the compass is. I'm using the Z2 as a wall stub finder. Thanks.
@Wit Rigs can we replace main camera unit of xperia z2 with any other manufacturers camera unit like lumia/samsung ????
+Mahin Abubakkar K M the phone can be worked normal when the camera replacement is compatible with the phone,otherwise it can't work.
+Wit Rigs is there any compatible camera unit is out there for z2
+Mahin Abubakkar K M here is the original rear camera for sony xperia z2 www.witrigs.com/oem-rear-camera-for-sony-xperia-z2
I lost the battery screws. Do you know where i can buy a replacement?
My GPS stopped working. It is integrated on the board? I have to change the motherboard or other item?
hello what happens is that since a few days ago my z2 does not serve the tactile image but is in black, some solution or tap to change the display cell had been wet before inside
*****
Does the phone get wet or drop before the problem happened?
yes same problem here, few days ago i went swimming and take a photo with my xperia z2, then suddenly i notice there is condensed water inside (i look at the lense, and yes there is some water inside). after that my z2 still work but when i left the battery uncharged till 0% it could not turn on anymore only black screen and boot logo for not more than a second, i've tried some solutions on internet such press reset button, power + volume up button, but nothing change at all. whenever i try to connect to PC, nothing detected. the only thing turn on now is only the LED lamp with red when i keep charging it. so i wondering i should remove the water inside. Could i do that?
I opened my friend and z2 to clean water and there is no change lol I have no money for the display so not :
Wit Rigs what temperature do you heat it to to remove the rear glass?
90-100 celsius
The primary mic of my z2 has stopped working. I wish to get it replaced. Can u tell me exactly where it is situated. Is it the main flex? If yes, do i need to replace the whole main flex or just the mic. If no, please tell me the time in the video when you were dissembling the mic. Thanks.
Absar tariq Hello. The mic locates in the main flex cable. If the mic is broken, people can't hear your voice while making a call. You have to replace the main flex cable. www.witrigs.com/oem-main-flex-cable-for-sony-xperia-z2 . (6:42)
Wit Rigs thanks a lot
Hey everyone, do you know where the bluetooth module is located? Part of the mainboard?
Just wanna ask one question is the front firing speakers equally loud on Sony Xperia z2 ?
Hamza Amir Yes.
Wit Rigs yes my z2 has water
The back case I ordered didint have nfc with it on back but can I still use it without one?
+Olsun Yes, but you will lose the nfc function. If you want the nfc function back, you can put your old nfc to your back cover, or you can buy the new nfc antenna like this: www.witrigs.com/oem-nfc-antenna-for-sony-xperia-z2 .
Hello, I have been looking for a replacement microphone on your website but i cant find it. I also didnt see the microphone in the dissasembly. How do i replace it and do you sell it?
Thanks in advance
+Ben Grossen the microphone is on the main flex cable www.witrigs.com/oem-main-flex-cable-for-sony-xperia-z2, if you need to replace microphone then you have to replace the main flex.
Is it posible to take the antenna cable from this phone and place it in Z3? Since my antenna in Z3 is damaged... or maybe even some earlier once? For example Xperia Z to Z3?
hmm...my z2 got splashed in water while charging,my antenna cable was damaged there was no help for the phone.
ako ti je samo antena pokvarena moze sigurno, ali uglavnom voda udje i unutra kroz tu rupu za punjenje i osteti maticnu plocu, a onda je vec sranje...
what happens if antenna cable is damaged/broken?
what happens if antenna cable is damaged/broken what happens to the phone?
+Hassan ali you buy a new one... if you can't find any in your town, there are some on aliexpress
Thanks for the video. I want to disable the touch screen. I think I can do this by pulling out one of the LCD cables you showed in this video. Can you help me identify which one please
Could you please send an email to support@witrigs.com? and I send you picture.
How do you make sure the back cover stays on there and doesn't fall off the first time you drop the phone on the ground or in the water?
It should be fasten by the original back cover adhesive sticker.
new batteries change..but can't stand a month later the battery is a problem..what is the cause? do I need to change the motherboard?
90% out of focus great disassembly 10/10
my light sensor doesnt work at all. are there any options it can be repair without replacing ?
Arkadiusz Radomski Plz check if there is problem with the relating setting. If not, the light sensor has been broken, then you have to replace it.
Wit Rigss i replaced screen and i cleared sensor connected it once again and it's working now great
Just wondering could u put in like a better display? Like into z2 a better display? z3's display onto z2
Dorifto99 The screen for Xperia Z3 is not compatible with Xperia Z2.
any other better screen u can put on z2.
Dorifto99 The original Xperia Z2 LCD screen :www.witrigs.com/oem-lcd-with-digitizer-for-sony-xperia-z2
Dorifto99 You cant upgrade the screen, nobody does upgrade screens that I know.
The power button and volume of my Z2 are not working, I reutilizei the flex cable that was another frame, I need to buy another flex or I messed up the installation?
You'd better buy the original main flex cable for Z2 to ensure its normal function.
Can one replace the SIM card reader wtihout having to replace the whole motherboard?
No, since it is welded to the motherboard, to replace it is a little bit of difficult, so you'd better replace the whole motherboard.
can u make tutorial for IC power replacement? for xperia Z2, thx
hi...very informative video though i'm not sure if this is sanctioned by sony. is the battery pack for xperia Z2 readily available in the market? or is it only available in sony outlets?
Don't worry, it it really available in the market. We also have such an original and new battery for z2 www.witrigs.com/oem-battery-for-sony-xperia-z2
Hi,
thank you so much, very nice video!
I did open my phone, Sony Z2, I removed everything just like in the video (+ I opened the front side as well) and then put back everything. Now when I try to start the phone it just blinks 3 times in red and won't start? Apperently something wen't wrong, can you help me? :/ btw I connect the phone to the charger and it doesn't help, so its not the battery... :(
Plz check if all the flexes have been connected tightly in correct place especially the touch screen flex and the LCD screen flex.
how long should the front and back be heated for?
The back cover? Heat up with 30-50 centi degree for 4-8 minutes
thanks! what about the screen?(front cover)?
Hi, my phone just died and the only thing it does is flash red from the status LED once per second. This happens only with the USB charging method. No other signs of life. I did nothing to my phone (no drops or spills on it) it was working fine and then it just died. I saw that SB suggested that I disconnect the battery and because Sony doesn't care about my problem I decided to try this.
So I have 2 questions: 1) How do I glue this back together once I separate the back with the same protection? 2) What does the Z2 back cover sticker do?
I've got one question.
I accidentally dropped my Z2. I'm planning to buy a complete housing, new adhesive and back cover (mine was damaged, and is not water-proof anymore). The phone itself is 100% working, but this annoys the hell out of me.
What are the chances to get it to be water-proof again?
It can be 100% waterproof if replaced by the Sony center. But it is hard to ensure the water resistance if you do it by yourself.
Wit Rigs hi can u tell me please if i buy a replacement screen for a sony z2 it would be waterproof?
Super cette vidéo,avec un minimum de savoir faire,c'est accessible au commun des mortels !!!
Hai Wit Rigs,
Do you have a solution for ghost touching xperia z2? do I have to replace my lcd + digitizer?
Plz come to Sony Support forum talk.sonymobile.com/t5/Xperia-Z2/GHOST-touch-problem-Z2/td-p/663333 to check out the problem.
Assistam esse teste aqui.
Sony Xperia Z2 - Teste na Água - Walker's Videos
pelomenos um br aq né,kkkk
Yo what type of suction cup ist that. My shit kept on popping out and wouldnt stay there.
Hi there! Where is the GPS module?
what is the back cover made from ?
hi I replaced my cracked Z2 screen using your excellent youtube video. The new screen looks great and everything on the phone works except the wireless charging port. I didn't think to check this before putting the back on the phone. I only removed the battery and the bottom of the phone so I am unsure what has happened. Is there anything I can try without removing the back again, which was very tight. Many thanks :)
hello very good video.i have a problem ,i have disassembly the phone but when i have reassembly i have lost one piece and i dont know how i must put it .thanks
Jordan ZINGARELLI Which part did you lose?
my z2 dont take calls anymore or recieve calss,text because it was dropped even though it worked before and its unlocked whenever you put a sim card in it shows the network and signal bar you wont able to make,receive calls,text what ever so whats the problem here any suggestions?
+Hassan ali have you tried it with other sim card?you mean it still read sim card but no calls or messages received?
Wit Rigs yes it's unlocked I tried it with many sims but don't work when I first got the phone it was working fine but since I dropped it I wouldn't able to make calls or receive calls or SMS,text even though its connected to a network and the signal bar is showing something inside damaged but don't know what it might be.
Luki Gorik lol yeh
+Hassan ali nice ;) i wont one to :D
+Luki Gorik Dude, seriously?
do you have a video showing how to replace the magnetic charging connector like this www.witrigs.com/oem-magnetic-charging-connector-for-sony-xperia-z2? is it glued to the phone chasis? does pushing it from the inside will pop it out? i really need your help because mine is broken and i cant use the usb port to charge my z2. thanks
I have a question about this my friend. I have a Z2, it was sumerged in water 20sec and now the screen doesnt turn on!!! The phone is still working with sounds and everything else but i got a black screen. When i turn on the phone i can barely see the sony logo, but it is all. Do i need to change the screen? Or send it to clean it, since a had another phone that was in the same situation and i cleaned it myself and it survided. Please answer. Saludos desde Peru amigo. Eres un genio!
No men, I could barely see the system, the UI but it was just for few seconds, then what i only get was the sound. Besides, now I can turn it off by guessing where the menu bottoms are. The system is ok, but... the screen... Do you think the flat is wet and that's why i cannot see anything?
***** At first it was barely visible, but then it disappeared.
Warranty Is The Solution ;)
Andres yo tenia un xperia z y resulta que estos telefono se recalientan demasiado y la parte de atras va perdiendo el adesivo y se levantan un poco por alli le entro agua al mio y le paso eso con la pantalla pero luego de varios dias o semanas volvio a la normalidad puede que esto le haya pasado al tuyo
I was a xperia z and this phone has some problem with the glue in the back side, it lose when it turn hot. The water get in to the mine but it go back to normal after several weeks may be it happend to yours
PAJOLERO PAJOLEROS xD que pésima traducción de Google amigo , por eso existe la garantía ya se lo dije jaja
my top speakers is fairly quieter than the bottom speaker! is it normal? Do you have the same issue? android 4.4.4 xperia z2! thanks in advance!
Yea omg I'm not alone. When listening to music I can notice the difference too
hahah at least now i am not alone ;D This can be fixed with an update! I did my research and it most likely a software issue bro! Did you test it underwater? Because this may caused a problem! But it gets fixed usually after a few hours... Anyway keep me up to date :D! I am gonna tell you if my problem fixed!
the only thing i wanted to see was how it is around the part in wich i plug the cable to charge, because my phone is day after day harder to get to charge ON, i plug the cable in and out till it's finally works, but today, i failed XD ... and i can't turn it on anymore, just wondering if i can do smthing by myself, or is it dead ? : x
Perhaps the charging cable is worn out. You can try a new USB charging cable. If it still doesn't work, then change the charging port of the phone.
Cable is working, the usb connector is dead then, does it really needs any welds to be done ? that's what i've been told when i called a repair center :x
I don't have a heat gun nor hair dryer. But I have soldering iron. Doubt that it will help in my case :(
no no soldering iron, the temperature of it is too high for the phone. Could you borrow a hair dryer from some friends?
Assistam esse teste aqui
Sony Xperia Z2 - Teste na Água - Walker's Videos
what if i dont have a heat gun or blow dryer? what shall I Do ? please help me
leave it in the sun to heat up the glue
stone ages lol ,he can use magnifier to condenses light on the device
Hi, great movie.
I dropped my Z2 and the back glass broke, but it was still usable, but after a while it lost signal and could not connect to the network.
Wi-Fi, bluetooth and NFC worked properly.
I ordered white back glass and repair kit and used your video to take me through it. The glass is now changed and looks great. But the phone will still not connect to the network, while I was "in there" I checked the RF cable. I disconnected it and connected it again, but still no signal. Do you have any idea what may cause this and how to fix it?
Philip Eliassen It seems there is something wrong with the motherboard due to the heavy dropping.
Hello.
Can u please tell me how much did it cost you to get the back cover for the Xperia Z2
Hussam Ozee The original back cover costs $23.95. And the custom one costs $12.99. Xperia Z2 replacement part : www.witrigs.com/sony-xperia-z2-replacement-parts
I have faced the same issue then I was able to fix it by removing the vibrator and speaker housing and checked the 2 pins that connect the secondary antenna to the frame.align them to be connected to the frame again. hope this will help.
i accidently slid my sdcard under my Touchscreen instead of the Slot - can i somehow remove the Display, to get it out again?
did you get it out? The same happened to me
+Jack Henderson yepp!! i ordered this "Splitterpinzette Feilchenfeld - Pinzette spitz - extra feine Spitze - Edelstahl www.amazon.de/dp/B004PH432K/ref=cm_sw_r_other_awd_Ym7gxbV9CEWDE " and it was a bit tricky and you need to be very careful. it took me a little. since i tried to remove it with a hairpin before and it slid in even deeper. but i got it back! :) good luck to you!!
Ok thank you
good video i would prefer some music in the background though, but thats just my preference that may make the video better?!
Thx and we may consider you kindly reminder.
My Sony z3 was broken a little I should change or not
Hi I have a problem my z2 is having problems while charging, at the begining it's charging normally but after a few minutes it's start to disconnect and not load, this issue happens to me in both the magnetic and the usb port
***** It seems it is a bttery failure problem. Try to replace the battery.
Thanks
Really good video, it helped a lot, but I have 2 question:
Where is the primary microphone?
Where is the secondary microphone?
It's important to me, I think I need to replace both. After my phone broke, my mics are terribly noisy.
+Attila Beleon the primary microphone is on the power flex cable, and there is noise-canceling mic on motherboard.
+Wit Rigs What is the power flex? I need to repair my main mic
+Félix Johan Rojas Medina
It's a cable, power flex cable.
+Attila Beleon so in order to fix My mic I need to replace that cable?
+Félix Johan Rojas Medina
The primary microphone is on the power flex cable, and there is noise-canceling mic on motherboard.
If I were you I do a "1 week test" without the noise-canceling mic. Turn it off, and use your phone for 1 week with this option. With this you can test which mic you should replace.
If your phone is OK without the noise-canceling mic, you should replace the MOTHERBOARD. If your phone still doesn't work, there is a problem with your main mic, so you should replace the POWER FLEX CABLE.
Please guys help me my wifi and wlan dont working where are the parts for that in the phone. Great video
Hello.nice Video. can You make a Video how I can change a card reader of a z2? thanks
cross screwdriber is called phillips
CAn you post a video on Xperia T2 Ultra Dual Disassembly
My z2 started heating up today by itself. I just cliked to see time and it was like a heat wave hit my phone. It started at the back of the left corner. I turened him down and it was fine. But when i do something on him it's burning. Can anyone help?
+Katherine Sh I think you battery is too old.
Wit Rigs I bought the phone 3 months ago.
What about power button?
So if younreally wanted to replace battery you could
The amount of dmg through the dissasembly process is insane, you actually destryed the phone!?
for the facing camera, you should release the clip before you pull out the cable...
Easyphix Mobile Phone Parts Repairs Thx for advice.
Wheres the cpu and gpu?
my back cover of z2 is broken into pieces. i need to replace it but dont know here it buy it from, anyone can suggest please? white color z2 it is, anyone from India, please!
Hi, here is the white back cover for z2 which is custom but still in high quality www.witrigs.com/custom-back-cover-for-sony-xperia-z2-white.
How to get the new battery?
You can get it here www.witrigs.com/oem-battery-for-sony-xperia-z2
how to replace Xperia z2 headphone jack ?
sent