Flysky fs-i6s & CAT 339DL Controls Demo.

please like, share and subscribe. thanks.

[@wolffin100]

Awesome, thanks for sharing this 👍👍💪💪

[@ianyams]

Thanks for the kind words, you're welcome 👍

[@dominiekvinckier2636]

Nice iam but what means the T en R on the remote thumps up 👍👍👍👍👍❤

[@ianyams]

Thanks Dominiek. T & R ?

[@speednut071]

How do you adjust the pump pressure? I still can't figure that out on mine. Thank you

[@ianyams]

Rather than reducing pressure you would reduce the speed of the pump, to do that you need to find out what channel the pump is on. What seems to be the problem you're having?

[@speednut071]

Oh its not really a problem, this is my first hydraulic excavator and I kinda feel it's lacking pressure.
So I would like to get the most out of my pump I suppose.

[@ianyams]

Ok. My philosophy is if it works don't try to fix it 😉 as long as the hydraulics have enough power and speed of lift/dig then it works ok.

[@rrocket1117]

Hello thanks for the vids, before I mixed my channels for the pump reset my radio, same as yours, I lost my channel 9 and 10 vrx A and vrx B for my tracks, now when I engage say one track with vrx B the track turns, but as soon as I let off the knob it immediately takes off the other way there is no off or stop, do you think this is because my configuration has been reset or is it the ESC, myself I think it is the configuration, could you please tell me your endpoint settings if any or any other setting you might have on your track controls please, unless you think it is my esc needs reprogrammed…. Thank you very much!!!!

[@ianyams]

Hi, I think it's your settings. Is vrx a & b the shoulder dials? If so swipe right on your transmitter screen and make sure that channel 9 & 10 are set to the said dials, if they are move the dials while still on that screen and see what is happening on the graph. Let me know.

[@rrocket1117]

Yes they are the dials on plugged into the RX on 9 and 10, vrx a left side vrx b on the other, and as you said, when sliding to the stick screen 9 and 10 do indeed travel with the dials, I’ve got it all plugged up right and it should work darn it!!

[@rrocket1117]

Thank you for the reply!!
Very much!!

[@ianyams]

I'm sorry I don't really know what has gone wrong, it's hard to tell without seeing your setup.

[@gourav925]

Can't we control it completely with FS-i6

[@ianyams]

Yes.

[@yasons9531]

Hi can i use Flysky FS I6S 10CH 2.4G, for rc excavator

[@ianyams]

Hi, yes.

[@yasons9531]

@@ianyams ok thank you very much,

[@yasons9531]

And Can you tell me which electrical parts I need for a hydraulic excavator?,

[@ianyams]

@yasons9531 you're welcome.

[@ianyams]

Pump, oil tank, esc's, receiver, battery.

[@gourav925]

Which country are you from

[@ianyams]

UK.