I'm so glad I finally found your video I've got to the final stage of the build and I've come across this exact issue as you have gladly shown in this video which I'm glad to of found now all I've got to do is strip the front down and pull that bugger out lol hopefully this will sort it out cheers Steve much appreciated 🙏👌🤞👍👍
YES! I managed to get the c3 out like you I was reluctant to do it but after watching your video I did it and now my kitt is all up and running thanks to you Steve 💯❤️👍👍👍👍
a year later after your video Fan home has not fixed the issue . I had them send me new parts and it still didn't fix the problem then I remembered the internet thank you for your video on this problem
Me and my old man had this issue and after seeing your video I clipped it off with flush nose clippers well he winced we had a good laugh after it started working, thank you
Thanks for the info. I did try it out and (holy shit) it worked!!!! I only have one problem. The scanner light never shuts off. If I hit the button on the watch, it'll shut the sound off, but not the light. It continues back and forth. Not a huge deal, I guess. I can deal with it. I'll just have to remember to always shut the main power off when it's not in use
Glad it worked for you mate , I haven't heard of that problem with the scanner not shutting off but I suppose that's better than it not working at all .
Here to say thank you for this video. I can't tell you the time waste troubleshooting and getting no where with Fan Home support. Cutting off C3 not only restored scanner functionality, I have perfect functionality.
Thank you for the video i have the same proplem i eat many hours to figure the problem plus ➕️ i can find parts to replace 😅 the issue and the cost 😀 thank you for the video and cheers 🍻 mate.
Kind of worked for me. Now I might get one full travel of scan with the leds but then stops scanning. The sound works and all of the other light stay lit. This is frustrating. Edit: I had a 2nd scanner board and tried again and it worked out great! Maybe I damaged the first one cutting off C3. Works great though now! Thank you so much!
Had the same problem and removed the c3 carefully with the sodering iron. It wasn't defective and it measured 8.6uf. It would be nice if someone that had his scanner work without removing C3 could measure his C3 capacitor so that we narrow down what the cause of this problem actually is. Could it be that the wrong value cap has been installed on the non working scanners or is it something else?
I'd love a second one to turn into KARR , but it's a 2 year subscription unless you can manage to find somebody that collected it but didn't build it .
I have the same issue and no help from fanhome either, can i just ask though because mine has c1 then thats it there is no other c labeled chips however there is a R3 thats on the back of the scanner circuit board would that be the same one?
Hi Reece , the C3 cap is on the back of the scanner board . If you have a contact I can send a picture that will help , I can't post a picture in the replies
i have a different issue. As soon as I turn my power on at the battery compartment the scanner comes on (chases as it should), but the watch doesn’t do anything for it. I can’t turn it on or off with the watch. Bloody thing keeps resetting to French too.
Not sure about that one mate ? I have heard of the watch resetting , this is due to the battery , try a new one , mine kept resetting due to the battery also .
I think they will end up sending you another issue of 42 with another motherboard free of charge . Fanhome have an awesome customer care mate they sent me one till I found the cure out for myself .
@@strokemondeo yes I'm inpressed so far. I contacted them last year to see if they could help with one small part I had ballsed up and rounded off somehow and they sent me the entire pack again.
fanhome send me aa pic from a total wrong platine and say me i should remove c3 clip from platine and than it should works but with wrong platine pic they send its absolut useless . know they not which platine is in this modell ?
Can you help me , I am near the end and just went to test the electrics and nothing is working , I changed the batteries , I just don't understand why can you help
Hi mate , First make sure your butteries are fully charged , Then make sure your watch battery is good aswell as those tend to go flat . Make sure all your wiring leads are secure in the motherboard especially from the power lead . Try these 1st
@@strokemondeo yea but no one say me that self support of fanhome send me a pic to fix it but say not that the scanner board means and than aallready send me complet wrong pic from a unknown circuit board .. and give me no answer
Send me your Email so I can send you some info . I have the pictures Fanhome have released to help this problem after I raised it . I do have the pics somewhere I can forward you
I'm so glad I finally found your video I've got to the final stage of the build and I've come across this exact issue as you have gladly shown in this video which I'm glad to of found now all I've got to do is strip the front down and pull that bugger out lol hopefully this will sort it out cheers Steve much appreciated 🙏👌🤞👍👍
YES! I managed to get the c3 out like you I was reluctant to do it but after watching your video I did it and now my kitt is all up and running thanks to you Steve 💯❤️👍👍👍👍
Glad it worked out OK Paul, n thanks for sharing the video too 👍
a year later after your video Fan home has not fixed the issue . I had them send me new parts and it still didn't fix the problem then I remembered the internet thank you for your video on this problem
No worries mate , Thank you for remembering the video , It's helped many people now 👍
I've just shared your video to the Facebook page of the knight rider build and again many thanks for sharing your video 💯👍👍👍👍
Cheers mate , and Thanks
I did it on your recommendation and had everything crossed 🤣🤣🤣. It worked perfectly. Many Thanks.
Glad to help Michael 👍👍
Thank God it worked perfectly...What a waste of time trying to search for the problem..Thank you for the help.
Glad I could help mate , don't forget a like n Subscribe ( to help the algorithm) to help all the other builders find an answer .
Yes sir that was best fix ever! Thanks!
Glad to help
Man this was a time saver!! I was very hesitant to cut C3 off but sure enough it worked!
Your welcome, glad it helped mate 👍
Me and my old man had this issue and after seeing your video I clipped it off with flush nose clippers well he winced we had a good laugh after it started working, thank you
@thunderfox53 ha, yep I did too with mine , glad it helped you out 👍
Wow!!!
I can’t believe this trick actually work!!!
I had the same problem but I was told it was the main maid board, not the scanner one. Thank you 😎
No problem mate , glad to help 👍
Thank you!! This worked perfectly!!!
Glad it helped mate 👍
Thanks for the info. I did try it out and (holy shit) it worked!!!! I only have one problem. The scanner light never shuts off. If I hit the button on the watch, it'll shut the sound off, but not the light. It continues back and forth. Not a huge deal, I guess. I can deal with it. I'll just have to remember to always shut the main power off when it's not in use
Glad it worked for you mate , I haven't heard of that problem with the scanner not shutting off but I suppose that's better than it not working at all .
Here to say thank you for this video. I can't tell you the time waste troubleshooting and getting no where with Fan Home support. Cutting off C3 not only restored scanner functionality, I have perfect functionality.
No worries, glad to help . Mine had the same problem n this cured it .👍
Thank you for the video i have the same proplem i eat many hours to figure the problem plus ➕️ i can find parts to replace 😅 the issue and the cost 😀 thank you for the video and cheers 🍻 mate.
@user-ed2dg8kq8i No worries mate , Thank you
I also, cut c3 on the circuit board. now, my scanner works great!!!
Glad it works for you mate .👍
Kind of worked for me. Now I might get one full travel of scan with the leds but then stops scanning. The sound works and all of the other light stay lit. This is frustrating.
Edit: I had a 2nd scanner board and tried again and it worked out great! Maybe I damaged the first one cutting off C3. Works great though now! Thank you so much!
Bro thanks so much i was so worried about that i broke it so guys if you have the same problem just do it it now works perfectly
No worries mate , glad to point you in the right direction, we're all here to help 👍
Yes brother. Thank you. I took my clippers snipped that little black chip just like you said , and now it works perfect. Thanks again!
No worries mate, glad it helped you out too. 👍
Get those nail cutter out , cut C3 off of the scanner circuit board n plug everything in as labled , 100% works 👍
What do you mean by cut C3?
@aceaceington2759 ...cut component C3 off the back of the scanner board , it is labeled underneath the cap .
@@strokemondeo ok I will give it a shot, cheers
Had the same problem and removed the c3 carefully with the sodering iron. It wasn't defective and it measured 8.6uf.
It would be nice if someone that had his scanner work without removing C3 could measure his C3 capacitor so that we narrow down what the cause of this problem actually is. Could it be that the wrong value cap has been installed on the non working scanners or is it something else?
Joe doesn't have that problem with his. Then again his was screen used!!😎
If you're already working on K.I.T.T., what about K.A.R.R.?
I'd love a second one to turn into KARR , but it's a 2 year subscription unless you can manage to find somebody that collected it but didn't build it .
I have the same issue and no help from fanhome either, can i just ask though because mine has c1 then thats it there is no other c labeled chips however there is a R3 thats on the back of the scanner circuit board would that be the same one?
Hi Reece , the C3 cap is on the back of the scanner board .
If you have a contact I can send a picture that will help , I can't post a picture in the replies
i have a different issue. As soon as I turn my power on at the battery compartment the scanner comes on (chases as it should), but the watch doesn’t do anything for it. I can’t turn it on or off with the watch. Bloody thing keeps resetting to French too.
Not sure about that one mate ? I have heard of the watch resetting , this is due to the battery , try a new one , mine kept resetting due to the battery also .
@@strokemondeo Thanks mate, I’ll keep hunting. Ive messaged Fanhome too but that’ll take a few days to reply I’m sure.
I think they will end up sending you another issue of 42 with another motherboard free of charge .
Fanhome have an awesome customer care mate they sent me one till I found the cure out for myself .
@@strokemondeo yes I'm inpressed so far. I contacted them last year to see if they could help with one small part I had ballsed up and rounded off somehow and they sent me the entire pack again.
Love how you can do that with the whatch that's awesome man sweet 👍
fanhome send me aa pic from a total wrong platine and say me i should remove c3 clip from platine and than it should works but with wrong platine pic they send its absolut useless . know they not which platine is in this modell ?
Can you help me , I am near the end and just went to test the electrics and nothing is working , I changed the batteries , I just don't understand why can you help
Hi mate ,
First make sure your butteries are fully charged ,
Then make sure your watch battery is good aswell as those tend to go flat .
Make sure all your wiring leads are secure in the motherboard especially from the power lead .
Try these 1st
I Didn't know That You Was Building K.I.T.T. Too.
Also building the Deagostini Lamborghini Countach LP500S Peter Wolf edition 😊😊😊
c3 from the scanner platine ? not from platine in the car ?? why say fanhome that not ?? and i think they mean the big platine in back of car...
No not the rear circuit board, C3 on the back of the scanner circuit board , the circuit board at the front behind the scanner .
@@strokemondeo yea but no one say me that self support of fanhome send me a pic to fix it but say not that the scanner board means and than aallready send me complet wrong pic from a unknown circuit board .. and give me no answer
Send me your Email so I can send you some info .
I have the pictures Fanhome have released to help this problem after I raised it . I do have the pics somewhere I can forward you