Add Sonoff wifi devices to iHost and control them locally
Вставка
- Опубліковано 8 лип 2024
- After reviewing all the Zigbee features, it is time to link my "old" wifi devices that are in my eWeLink account. It is a very easy and straight forward process. As with NSPanel Pro, not everything is working now, not all the devices are supported and not all the features that are available in eWelink app is working in the iHost. But I am sure it will be improved in the future.
iHost preview: • What is a Sonoff iHost...
Zigbee review: • Sonoff iHost review: Z...
(Pre-)order here: itead.cc/product/sonoff-ihost...
Supported wifi devices: ewelink.cc/ewelink-cube/suppo...
Chapters:
0:00 Intro
0:55 1.5.3 Firmware
3:22 Installing the ewelink component
4:39 Linking Wifi devices to iHost
9:47 Scenes
13:52 Outro - Наука та технологія
Thanks for the video, Seems strange I have identical son-off(MINIR2) smart switches, where some are synced and some are not supported yet. I wonder if its how they are connected to the network in some way.
Strange, wonder if some of them on an older firmware?
might depend on production batch and components used cause they replaced components on products without notice
Hi very helpful video, but I need assistance with the settings for the memory and %CPU of the Add-on - the User Guide skips over it. I have the RV1126 DDR4/4G and may add HA and Homebridge. Can you advise?
I have isntalled 3 addons now, and I never changed anything on that screen. I assume you could limit the CPU or the memory usage, but I have never experience any issues, and never felt the need to do that. So just leave them empty.
Thank you for the prompt reply. I’ll have a go today.
Thank you for this video. The problem I have is only the originally powered wifi devices show up in both the Home and Docker screens, any devices that were powered on after the original devices were detected are not detected at all. I have uninstalled and reinstalled the ewelink/ewelin-smart-home add on and also clicked the redetect button numerous times, but still only the original devices show up. Any ideas how I can get my other devices to show up on the iHost?
Oh that is good question. I have to try it as well. I think since I synced my devices I got a TX Ultimate which I yet to add to iHost. Let me see how it works.
I ordered two iHosts. The first two days have been very disillusioning. I am not able to install docker containers in 1.5.3. Bevahior is generally strange. Reboot doesn't work. Also pairing Zigbee 3 devices has not been successful yet. If I had only one iHost I would believe in a faulty device. But with two devices...? But how come it works with your devices? Did you install that with 1.5.3 oder before?
I did install 1.5.3 before I added the homebridge docker installation. And it was all good. Which image you wanted to add? Because for me it looks like you can see all these images, but I am not sure if you can install just any... But it is not clear at all.
There are some Tuya Zigbee device in the market. Will it work with ihost? I have purchase one ihost unit , so far it works with sonoff but want to know if it works with Tuya devices . I have tried one Heimann Zigbee Fire alarm and it works fine
And I tried with a Blitzwolf door sensor and that works fine as well. I think as long as you find a similar product what Sonoff sells it will work. I mean buttons, motion sensors, lights, door sensors. But something completely different (like a irrigation valve, or thermostatic valve) would probably not work, because Sonoff did not cater to those special characteristics.
@@csongorvarga Thank you.. will try to buy some unit and try it out.
like example. i use schedule for my aquarium light in Morning on -off evening on-off and i have 2 switch for light , so i have to use 8 scenes?
Yes, one scene turn the light on, another scene turns it off. If you want to turn on/off multiple lights are the same time, you can add them into a single scene, but for each time (schedule) a new scene is required.
@@csongorvarga after 10 months ihost still is shit.i will turn off put in cabinet and wait then they upgrade software
any chance to add a ssd instead of a micro sd that is unreliable for docker & co ?
I don't know, I did not test it. I am not sure what the USB slot is for, it is would support and external SSD. But maybe the code is hardcoded to use the SD mount. I have seen other videos where they disassemble the iHost to look at the internals, but I am not knowledgeable in the hardware that much.
Does the Ihost support ALL the sonoff devices. Does it include the power metering devices from sonoff ?
Will I have still be able to controll devices and change scenes via ewelink when using Ihost ?
It is a mixed bag. Not all devices are support most most of the newer devices are. Power metering is also not consistent, my oldest POW R2 is not showing any consumption data, but the newer POW Elite, and POW CT are. And eWeLink still works independeny from iHost. You can use both to control the devices and you can have sceens on both.
I have an Nspanel and some other Sonoff sensors, can i use them Locally if i install the Ihost?
I understand that first to Sync, and add them i need Internet access, but after i done that, can i just run them on the Local Wifi with no internet, from the Ihost? Thank you
Yes, that is the idea. Just one caveat: still not all products are supported, althrough the list is growing all the time. And the other slight issue is that whatever you do on the iHost is not visible on the eWeLink app. So for example turning scene on/off that is created on the iHost can only be modified at home when you have access to it. But maybe there will be a solution to that as well in the future.
i understand, thank you. Luckily i just need an Nspanel and a Basic r2 to work in this way for a couple of weeks, then i will have full internet connectivity.
How about adding Tuya Wifi devices? Don't have any Zigbee devices. I do have several Sonoff wifi devices and a lot of Tuya WIFI enabled devices (switches, light-bulbs etc.). Can these be added also? Do I need a docker component? or can't they be added at all? Haven't really found any info on Tuya wifi integration on the web or seen it done on any video.
Hmmm, interesting question. I think there are some Tuya nodes in Node-Red, so probably using the Node-Red docker an integration can be built. But I am still strugguling to create anything beyond the most basic switch through Node-Red. So I need more time.
@@csongorvarga
To make the iHost more versatile (not just another Zigbee hub) and suited for your average Smarthome user, I think Tuya (Wifi) devices should be supported out of the box. Most cheap smarthome Wifi devices are either iTead or Tuya (smartlife) related.
But as Tuya is iTead's (sonoff, ewelink) main competitor, I don't think it will be directly supported in their firmware. It will probably become a community solution, so thanks for your effort!
@ddragonfly496 Yes I agree. But it is not easy because ther is so much in Tuya that do not exists in Sonoff. Many different device types with lot of different settings and UI control. I see no point Sonoff developping support for all these where they have no revenue after these hardware.
@@csongorvarga What about Matter? iHost should be able to support Matter later so could that help to integrate Tuya devices? Smartlife doesn't work even in IFTTT but atleast Samsung Smart things supports some Smartlife devices
nice video. is a beginner. how to connect zbminil2 to ihost
but in Ihost not posible to use timer and schedule ?
You can create a scene with a time start condition. What do you need specifically?
Thanks for your video, can ihost support other non Sonoff device?
Yes, but you will have better luck if you use device type which also exists in Sonoff. Like temperature and humidity sensor, motion sensor, buttons, switch/relay. Sonoff does not have for example energy metering switch or plug, if you try those it may only be recognized as a "regular" switch, and no metering will be included.
Thanks, I have some tuya device ( Moes zigbee Smart switch and Mose zigbee dimmer switch) with some Sonoff device. i donot want to go through home assist. for the integration can you do a video on this?@@csongorvarga
Ewelink devIces can be used locally with ihost?
Yes, that is what the video is about.
Can iHost zigbee devices be linked to eWelink app?
As of now, what I link to iHost does not show up in the eWeLink App. I am not sure if this is something this will fix/add later.
no schedule options for the devices from ihost¿¿¿¿¿¿¿¿¿
You can create scenes that trigger on a specific time.
I connected my ihost with ewelink account but I don't see the devices I have in ewelink, am I doing something wrong?
At what step did you get stuck? Do you see the device list?
@@csongorvarga
I was able to connect older sonoff devices and they are visible in ihost but nspanel pro and tx ulitimate switch are not visible, do you have any suggestions?
@@borosky5703 Not all the devices are supported and usually it shows in the list that you have a device, but it is not visible in iHost because it is not supported. But don't ask me why.
@@borosky5703 No suggestions. These devices will get support as well in due time. The only thing you can do is wait...
thx @@csongorvarga
hi, can ihost add aqara hub?
Why do you want to add a hub to the ihost? It has a zigbee hub built in
@@csongorvarga to use as a siren