Stucco roof-to-wall flashing, metal saddles.
Вставка
- Опубліковано 12 лис 2020
- Stucco roof-to-wall flashing, metal saddles.
Folks, we are located in Oakland, CA.
FYI, folks, here are all the basic tools we use and recommend on Amazon's website.
www.stuccoplastering.com/tools/
Live long and plaster hats, shirts, and other cool stuff. www.livelongandplaster.com/
Kirk Giordano Plastering Inc.
Send pictures to Jay or myself at our sites below for immediate bids.
www.StuccoPlastering.com/ Kirk’s website.
www.GiordanoPlastering.com/ Jason’s Website.
Learn the importance of stucco roof-to-wall flashing caulking all the penetrations.
Metal saddles for the waterproofing of a roof to a wall.
This video explains the importance of roof flashing saddles necessary for stucco longevity.
Understanding stucco saddles roof-to-wall metal flashing could save you a fortune in dry rot repairs.
This video also shows an alternative to having metal saddles fabricated to protect your number 1 investment. • How to Install roof-to...
You name it, we have done it.
In this video, we explain why these areas with no saddles failed to stop the rainwater. Sure, caulking is great, but it is not permanent unless you add metals, thick peel, and sticks.
Is it necessary to Calk all the stucco penetrations? You betcha; it’s super important.
Thus, if you have roofs next to stucco walls, take notes, or the rainwater will eventually penetrate this area and cause rot, leading to various problems you’re witnessing in this video.
In the video, you can only see two failed areas where the rainwater did its job and created wood rot; four saddles were needed.
As a licensed plastering contractor, I have replaced as many as thirty similar situations in my day.
Help put me out of work, install these roofs to wall saddles, and keep the rainwater flowing down your walls, not filling them up with water.
Say what you want, but the man is a showman.
Good morning Matt, LOL, just another day at the office.
Hi Kirk I'm from Trinidad and been watching your videos since the first time I saw you about five years now. and learn a lot of stuff from you,I have been do acrylic stucco and styrofoam mouldings for 12years a little different from most of your videos but when it comes to prepping certain jobs your videos make my work easier and my boss happier.and I watch you because for some reason I feel like home
Good evening Verendra Diaalsingh dude. You, my friend, have the most two difficult tasks in the plastering industry.
If your good at those, the rest is child play.
No doubt your boss is happy as you are competent.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Kirk, it's always very pleasant to hear you laugh and see a good video.
Good evening Jose Duude, thank you, that comment made me think.🤔
I've been sort of depressed for the last year, personal stuff.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Thanks Kirk! Watched a lot of your vids and learned a lot. You've given me confidence to go around my house and fix the stucco where its cracked, bowed and needs patching up.Keep em coming!!
Good evening Fryloc dude, will do thank you for the comment.🤔
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
As a painting contractor / owner in Florida you are so spot on about painting every 10 years or so. It amazes me to the condition of stucco and other types of homes we come across and the sheer neglect by the owners. I have to take the initiative to learn about stucco and plastering just to be able to paint these homes. Thanks for sharing your expertise Kirk.
Evening Nathan Tice my professional painting friend, I was being kind, between you and me if it's a quality primer and paint with a competent painter doing the prep work, about every ten to twelve years is needed to protect wood and stucco along with all other substrates.😉
On the flip side, one who skimps on painting products or the prep work every 4 years as the stucco develops cracks the rainwater gets in the wood expands, the ants and termites move in for dinner the rest is a feast for bugs than when the rainwater seeps into the cracks and rots/destroys the wood, insallations, sheetrock start to yellow, carpets become damp which creates the mold which sickens entire families, and on and on.......🤔
Let's face it, maintenance sucks, but avoiding it is ten times worse when you consider the short-term, let alone long term health and financial cost to repair.
FYI, both you and I would love to be on a warm beach hanging out with girls wearing something close to nothing, but maintenance comes first. 😏
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering
really appreciate all the time you and your family take to educate all, i've been a builder for 20 + yrs and i enjoy learning new techniques from you guys, keep up the great work, much respect
Good evening, Richard Fredette, cool beans daddieo.😉
Bringing to all the most complete plastering encyclopedia ever created in the world online.
www.stuccoPlastering.com
www.bayareaplastering.com
@@StuccoPlastering kirk , Richard Fredette here again we are currently on a 1890 interior and exterior renovation in Michigan , i ran into a strange situation and would love to pic your brain on a few things , i do all of my own finishes and there is an area of the building that has me a bit flustered , i'm pretty sure i have a solution to suffice but would love to talk on it if you have time , 313-308-5074 . best to you and yours , thanks
Much respect to you and your family.
Good evening West Hadden, thank you, my friend.
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Great work as always!!👍👍
Good evening Bryan Dude, thank you, my friend.
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Great work
Good evening Juan, thank you, my friend.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Good information , thanks for that Mr Giordano 👍 👍👍👍👍
Good afternoon Leo, most folks don't know this and or care, but since I was asked, I promised I explain what saddles are for when the opportunity came along.😉
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk Giordano Plastering
Super tools they have, great Company to hire!
Good evening Anthony, thank you, my friend,
Cheers.
That house looks cool
Good morning Oskar dude, you're right, It was a cool design.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Kirk thanks for the vids man
Evening Sub, no problemo, my friend.😏
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering
Another cool video !!
Good morning 86 dude. Thank you, this video will get a small amount of attention as most folks never heard of saddles. But they are excellent for preserving/waterproofing the substates.
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
goood stuff guys! sup Jay! thanks guys!
Good evening Thor, thank you, my friend.
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk Giordano Plastering
Thank you Kirk, I think I can go to sleep now without tossing and turning. 😀
Evening Susan turns out you were right all along, you just needed some reassurance, no worries.
Kirk
In the uk, we call it lead flashing and render str8 over it, no need for drip beads
Good morning Volt, my fellow spread from the UK. Here, we're required to place a weep or drip metal on all roofs, as we're not allowed to run the stucco to the roof.
Many ways to skin a cat.😏
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
@@StuccoPlastering as i say, we use a lead flashing so it can b rendered on/to majority of the time we fix a rendered bead to it anyway!
Kirk, you would be a shoo-in for replacing AlexTrebek (RIP). However you might be missed as much as he is, from youtube. Keep up the good work, brother!
Evening TJ, LOL, I think I'm too dumb with vocabulary to be doing game shows with words involved.😉
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering
Hi Kirk,
Just watched your video today and it is as always very educational. At the end of this video you applied a polyurethane sealed adhesive to the paper and stucco. It looks like a thick bead between the old stucco and new stucco which will separate the stucco rather than fuse ????
I wanted too see you plaster that wall!
Good evening Jay Dude, how about plastering a wall about 20 times as difficult, quickly, ua-cam.com/video/QgPXt5AXxqA/v-deo.html:
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk Giordano Plastering
ua-cam.com/video/QgPXt5AXxqA/v-deo.html
Can you tell me what ratio you would use for roof tile ? I want to mix mortar and sand but not sure the ratio. I know you would know since you do a lot of mixing yourself. I wantch all your videos
Hello S and H sugar. ua-cam.com/video/c3uLkaZr5O4/v-deo.html/. Sand and stucco ratio for applying consistency how much in the description.
Hmmm...Dunno bout that caulking prior to plaster Kirk..understand the concept...but adhesion of concrete will not be to caulking...thus I apply after...subsequently...depending on finish...addressing thereafter...as dry joint results in a crack either way??? Acrylics...you know...Lime...
Good afternoon Forsaken to none, excellent comment, two things if I don't caulk this vertical tie in, my lath inspection won't pass. Thus, I'm handcuffed.
On a brighter note, I'd rather have a hairline crack that can be flooded with a quality primer than a leak.😉
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk Giordano Plastering
@@StuccoPlastering
Ahhh so call it suit blockage that does not know their ass from a hole in the ground!!!
Reason I mention is based upon my experience Kirk...concrete sticks not to caulk...and in time...shall delaminate from...therefore re-exposing underlying caulk joint...fully...I would have to argue with a sample to over ride the authoritarian incompotence...providing proof...
Typical is it Kirk...all can read a book...yet it generally results in non comprehension of it thereafter doing so...
I have a small ac patch I need to plaster can I just put a piece of durock cement board on and apply bonding agent then stucco it or what do you prefer
Evening Alberto dude, of course, you can, don't forget the most important part, the two layers of paper or the waterproof membrane. There are many ways to skin a cat.🥇
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Doesn't caulking the cement prevent a good (cement to cement) bond, or are you using it as a flexible barrier between the existing and new?
Good evening my friend, nither. I'm caulking this transition as I won't pass the lath inspection unless this is completed.
This can cause a hairline crack as I lose the key, but I prefer the waterproofing instead of a key. Besides, my hands are tied. I'm caulking this vertical transition, or I will fail my lath inspection.
It's much more involved than this by this is the fastest version of, Why.
Note: anyone with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Like and support
Good morning my friend, thank you, my friend.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Are you able to restucco a house over the existing stucco or does it need to be removed first?
Good morning Pablo, of course, you can change the stucco finish or texture without removing the stucco.
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
I see you are often using RapidSet. I accidentally ate a tiny bit of it, is it toxic?
Evening Rice Dude, man, you're not supposed to eat it.
I personally use it as a creamer for my coffee. That why I can't catch Covid. The toxic lye and silica from this cement scribbled out a sign in my lungs that read, "No Vacancies." 😃
Just kidding, brother.🍻
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering
Hello Kirk. I have a home (in Socal) that needs stucco repair on exterior wall. Many suggested polymer bond coating after cleaning the surface that has old peeing paint. One of the stucco company however recommended to use FoamTek before applying the cementitious traditional stucco. Can you comment on Foamtek use for this ? It this same as polymer bond that others are suggesting >
Thanks. Love your videos.
Good evening SJ, here's the long version you asked.
WELD-CRETE or Quikrete are the only two I use. below are the reasons why?
en.wikipedia.org/wiki/Polymer_concretewww.awci.org/cd/pdfs/9502_b.pdf:
www.homedepot.com/p/Quikrete-1-Gal-Concrete-Bonding-Adhesive-990201/100318465
ua-cam.com/video/IwseKOFpy8M/v-deo.html: Weld-Crete Concrete Bonding Agent by Larsen Products Application How to Use
ua-cam.com/video/iiC8HUKLyHs/v-deo.html: stucco/plaster bonding agents for plastering, in this video I dilute it as it’s too strong to use full strength
www.larsenproducts.com/weld-crete/ I have been using this bonding agent for 40 years and have yet to see it fail thusly choice.
Cheers,
Kirk Giordano Plastering
Thank you sir for that. Should I be worried that this company recommended foamtek as bonding agent ? Do you have experience with it as good bonding agent ?
Good morning Lee, I've only used two bonding agents, weld-crete and quikrete, so I'm not in a position to judge any other products.
I'm in no position to try new products when the ones I have been using for 40 years have never failed me.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Foamtek is the way to go. It’ll stick to any painted surface. That’s how we do it down here.
(SoCal)
Good evening BlackHemi, no worries, I don't sell or push products, I explain the ones I like or use. There are many ways to skin a cat.😉
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk Giordano Plastering
Kirk, do you have my house bugged? Because you preach the same thing I do and have for years. lol 😂
Good evening Mike Justice dude. Bugging anyone's thoughts is pure evil, not my style, but happy to bring a smile to your mind naturally.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Do these saddles come pre-made? Or do you have to make them my self and solder them myself? If they do come pre-made where do I shop to buy one?
Evening Raymond, excellent question, my friend. As all roofs have different slopes, a good flashing man can make them fit any angle, then simply solder the joints.
If one doesn't understand flashing, let alone how to solder,
we'll then saddles need to be subbed out to a flashing man who does understand how to measure, cut, and solder.
I have not seen saddles in a hardware store. However, since this is not part of my trade, I may have seen them and not noticed them.🤔
@@StuccoPlastering Thank you for your reply, I'm running into the same situation on this back garage house unit in the back of my house. Where the end wall flashing and the weepscreed meet the wall. And it looks like there's a big gap and water could go into. You gave me a good idea on how to keep that water continually running down the side of it with the saddle. I just have no solder. Or I could somewhat make my own. So I'm going to have to come up with some kind of method that is similar. Thank you for your help.
@@RaymondGettler723 In the description, I do show how this is fixed if you don't have access to saddles. Were always improvising where were forced to.
Walking out the door in Philly.
Good evening Jerome dude, no worries, we'll be here when you had your fun. After all, it is Friday night.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Guarantee he had a mullet back in the day 😂
Evening Tommy Dude, down to the middle of my back.😉
Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
Lol
what does 60 minute paper mean ?
Evening Mr. Bigtime, it means, for example, the Jumbo Tex 60 Minute is the industry's leading 60 Minute has six times the water protection of standard Grade “D” paper while providing optimal breathability, and permeability;
For stucco, fiber cement siding, brick, vinyl, and wood siding.
I simply tell folks its code and we have to use it.
Cheers.
Hi Kirk I had my security bars put back on my new stucco. Iron works man drilled a 1in by 1in round hole into the outside stucco and through to my inside plaster wall into my bedroom to reach safety latch. Unfortunately the security bar had to be removed because of multiple mistakes made during installation that left me with this hole. The empty space between the outer stucco wall and the plaster wall looks to be about 1 1/2 to 2 inches. I want to know if I need to open the inside bedroom wall just a little to patch that hole from the inside so that when Im able to get the Stucco guy to come back out to fill in the 1 in by 1 inch round hole with about a 1/4 th inch of plaster to be filled in. I dont want to leave the inside wall on the stucco side unpatched because stucco might fall in between the two walls in cause other problems when they patch it from the outside. The stucco guy only does outside stucco. What are your thoughts on how to correct this.
Good morning Susan, Id buy a tube of More-flexx caulking, works for both interior and exterior. Problem solved 7 bucks.😉
FYI, If the caulking sags a bit, no worries, do the best you can let sit two days, then use more and trowel it on better.
Mor-flexx caulking has sand in it, but you can use a putty knife to make it smooth also.
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
@@StuccoPlastering I have a few questions. How do I get to your channel, I could not find it. I contact you through youtube. Secondly because the hole was drilled through all the coats of stucco will the mor-flexx be enough to keep water out when it rains?.
@@susanp6057 yes it will work for all those reasons.
Cheers.
🔨😎👍
Good evening T Bok, where you been man?
Cheers,
Note: anyone with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
You just released a mind virus with that song
Good evening Womp Bozer, LOL, my friend. it was the last song of the day for us.😉
Kirk’s Tip: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering
Stucco God
Good morning Peter dude, LOL.
Far from it brother, just a man who likes to earn enough cash to eat well feed my family, and keep the light on while eating.😉
Note, You may also type in any question you may have on Stucco/Plastering issues on our channel, and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
www.giordanoplastering.com/
I know this is new with that Kevin 19 mask
Evening Leroy, we've been in this pandemic for almost a year now.🤔 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel,
and like magic, a video will appear to explain how it's done.
This feature is miles ahead of any plastering forum. 🥳
Kirk & Jason Giordano Plastering