Thank you been printing for a few years but never attempted a helmet. Thanks to your video I just completed my first a Hex 3d Bo-katan helmet used your advice on supports and it came out great 30hrs on my Elegoo Neptune 3 Plus. Again thank you
Please can you make a slicing video for the helmets it will be very helpful!!! But this is an amazing video love your content. Keep up the good work man!
Well done and very thorough. Looks like you have a well thought out and efficient system. Visor installation, padding, maybe LED light installation (if you ever do that) would all be interesting future videos.
I just moved my 3d printer from the open desk into my closet, and well see how well it works for me. Love the clone pilot helmet, def one of my favorites as well.
Dude, I've seen your IG and also 3D print & make SW helmets...I walk my family dogs at UCLA a lot so I immediately recognized your shots w/bucketed heads on the steps. 😁 Nice to stumble upon this and didn't realize it was you until you mentioned the UCLA bucket.
Great video man! Always looking how to improve my finished prints. Thanks for the insight! You’re helmets are amazing and you’re a huge inspiration. Keep it up Ian!
Thanks so much for making this video!! I've been following your Instagram for a while now and brought my 3D printer to college with me. I cant wait to start printing again and I definitely wanna take a stab at making a helmet! I've loved your content on Instagram, and I cannot wait to watch all your content here!!! Thanks again!!!
Just a thought, I setup my CR10S with a direct drive from Micro Swiss, got rid of the Boden tube and have never looked back. No clogs since the upgrade 2+ years ago.
hey man amazon has a pop up paint tent with floor and rear vet hole for 69.99 cad so should be cheaper where you are should be under automotive paint supply. great work
Can you tell me also what that clear display in the corner is ? I'm always looking for space saving displays my Lego collection keeps spilling over everywhere haha😊
Awesome videos! I’m looking forward to making a clone trooper costume for Halloween, I have an ender 3 printer. My only question is how do you get the 3d print files? I know about galactic armory but unfortunately I can’t spend money on files.
Looks great 👍 I just got into 3d printing, I got a ender 3 v3 se printer and I was wanting to get in making some helmets and armor and thing's for my brother car. Any tips or tricks to get my started on the right path??
Great video! as you said when someone wants to do something he will do whatever what it needs to reach his goals! Question: Do you intend to sell those helmets? If you already sell them could you share with us how do you do?
i need help tuning as i dont know who have strings and did tolerant test anything after .05 is stuck would love also a slicer video to make helmets for me and my kids
Just a question, I am considering getting into 3d printing, but don't know what printer to start with. I'd love to make helmets like that, but I don't know what to get. Any tips on entry level 3d printers to buy?
Where do you get your 3D models for the phase 2 realistic helmets? for example the green one in 22:30 or the standard one aged at the bottom of the shelf at 10:16
Just found the channel and subbed. Been thinking about a printer to make helmets for quite a while now and think I'm gonna just go for it. Something I didn't notice in the video (may have missed it) and don't see anything on your channel about it, but I'm wondering where you source your files from. Do you just buy them from places like Etsy or are they available online for free somewhere?
Love your helmets, I am in the process of trying to replicate your work, where do you get your STL files for the helmets. I got a Phase 2 one off thingiverse, but to get your head in, the bottom has a neck lip that doesnt let you slide your head in. Any recommendations?
Galactic Armory has some pretty great files! I believe the neck ring is removed for easier fitting. If you do look into his files, use 3DELPRINT for a discount!
Thank you been printing for a few years but never attempted a helmet.
Thanks to your video I just completed my first a Hex 3d Bo-katan helmet used your advice on supports and it came out great 30hrs on my Elegoo Neptune 3 Plus.
Again thank you
Please can you make a slicing video for the helmets it will be very helpful!!! But this is an amazing video love your content. Keep up the good work man!
I will! Stay tuned!
@@3del_printing Ooo I need to find it on your channel!
Well done and very thorough. Looks like you have a well thought out and efficient system. Visor installation, padding, maybe LED light installation (if you ever do that) would all be interesting future videos.
I just moved my 3d printer from the open desk into my closet, and well see how well it works for me. Love the clone pilot helmet, def one of my favorites as well.
Dude, I've seen your IG and also 3D print & make SW helmets...I walk my family dogs at UCLA a lot so I immediately recognized your shots w/bucketed heads on the steps. 😁
Nice to stumble upon this and didn't realize it was you until you mentioned the UCLA bucket.
Got my first 3d printer, creality ender 3 v3 se, on order! This video will come in very handy! Thank you!
Glad it helped!
Hey i know this is an old comment but after using it, was this printer big enough for a full helmet or just peices of it?
@@7REDACTED7 just pieces
Love the process and work, can't wait till im able to do this, also Sergeant Boomer is from the wii game Republic heroes, he's part if the 501st.
Great video man! Always looking how to improve my finished prints. Thanks for the insight! You’re helmets are amazing and you’re a huge inspiration. Keep it up Ian!
Awesome video man keep it up! I can’t wait to see where this channel goes!
Can’t wait to see more brotha!
Thanks so much for making this video!! I've been following your Instagram for a while now and brought my 3D printer to college with me. I cant wait to start printing again and I definitely wanna take a stab at making a helmet! I've loved your content on Instagram, and I cannot wait to watch all your content here!!! Thanks again!!!
Go Bruins! 👏👏👏👏👏👏👏👏
Dude those 5kg rolls are badass!
Just a thought, I setup my CR10S with a direct drive from Micro Swiss, got rid of the Boden tube and have never looked back. No clogs since the upgrade 2+ years ago.
You need a man cave to expand your collection.All the best with channel👍
Mate I love your collection. The transport trooper helmet is my favourite.
I'd love to see how you add padding to your helmets.
Coming soon!
GREAT VIDEO
Thanks!
Thank You great video.
hey man amazon has a pop up paint tent with floor and rear vet hole for 69.99 cad so should be cheaper where you are should be under automotive paint supply. great work
Thanks for the tip!
Really cool vid, keep up the great work 👍🏻
Thanks, will do!
Please make a full tutorial for sanding printing and weathering in one vid
Bro it is def time to upgrade those steppers. You could be so much more efficient on the print side with a few upgrades.
You pay for a road cones, I find them all along the roads every where!
nice to see your set up. Is that a CR10? That was my first printer. Good to see others from around here, I'm in Salt Lake
One Question, would you recommend weathering pre or post Clear acrilic coating?
Thanks in advance
Can you tell me also what that clear display in the corner is ? I'm always looking for space saving displays my Lego collection keeps spilling over everywhere haha😊
Awesome videos! I’m looking forward to making a clone trooper costume for Halloween, I have an ender 3 printer. My only question is how do you get the 3d print files? I know about galactic armory but unfortunately I can’t spend money on files.
Looks great 👍 I just got into 3d printing, I got a ender 3 v3 se printer and I was wanting to get in making some helmets and armor and thing's for my brother car. Any tips or tricks to get my started on the right path??
Great video! as you said when someone wants to do something he will do whatever what it needs to reach his goals!
Question: Do you intend to sell those helmets? If you already sell them could you share with us how do you do?
WOW your helmets look great ,which Printer are you using
I don’t know if I missed it but what printer do you have?
i need help tuning as i dont know who have strings and did tolerant test anything after .05 is stuck would love also a slicer video to make helmets for me and my kids
Just a question, I am considering getting into 3d printing, but don't know what printer to start with. I'd love to make helmets like that, but I don't know what to get. Any tips on entry level 3d printers to buy?
Great video. Where did you get those lights that are hanging in the closet?
Where do you get your 3D models for the phase 2 realistic helmets? for example the green one in 22:30 or the standard one aged at the bottom of the shelf at 10:16
Just found the channel and subbed. Been thinking about a printer to make helmets for quite a while now and think I'm gonna just go for it. Something I didn't notice in the video (may have missed it) and don't see anything on your channel about it, but I'm wondering where you source your files from. Do you just buy them from places like Etsy or are they available online for free somewhere?
I get my files from Galactic Armory! Use 3DELPRINT for 10% off!
I've been trying to get into 3d printing, do you have any suggestions for printers?
My printer is in the guest bedroom closet 😂
If you have a guest over you should fix a mask to the extruder arm and remote start it lol
this is almost my exact printer setup. lol
Love your helmets, I am in the process of trying to replicate your work, where do you get your STL files for the helmets. I got a Phase 2 one off thingiverse, but to get your head in, the bottom has a neck lip that doesnt let you slide your head in. Any recommendations?
Galactic Armory has some pretty great files! I believe the neck ring is removed for easier fitting. If you do look into his files, use 3DELPRINT for a discount!
What printer do you use?
Love the video!! Just started making an ARF trooper helmet! I wanted to ask, how do you become an affiliate? Also, what printer do you use?
I use a Creality Cr-10s! Reach out to Aaron about his affiliate program on Instagram!
Reach out to Aaron on Instagram at @galacticarmory! I use a Creality cr-10s!
Do they still sell your printer? I can’t find it anywhere
Hey sorry i dont want to seem dumb but do you print the whole helmet and what 3D printer
The Creality Cr10 S, about 350 USD on their official website
The moment I saw it, I thought it was a bike helmet.
i wish i had a 3d printer but there like 50k that and my mom would murder me she hated when I bought 4 light sabers
I just bought my cr10s pro and printed a full size helmet in 3 days
@@ZaneTaylor-ui4od k....
@@Tigerpanzer6666 I was just letting you know you could do it for cheap…
@@ZaneTaylor-ui4od oh
what printer do you use?
He said creality cr10 s, it's about $350 USD on their official website