Love the bone breaker bow. I test shot the 30 and man I almost sold my motorcycle to afford this. Almost. Would love to see this stuff also included on the new levitate.
Perhaps explain why you consider adjusting cam lean at all without even shooting? Cam lean is inherent in any system and generally necessary to achieve solid flight.
Too much cam lean can cause string derailment uneven wear on the cams. Also cause vibration and noise one limb is being pulled more then the other its not good. Checking axle to axle measurements on both sides match the manufacturer Ata length if both sides are even or same measurement your good to go. Ata is more important imo.
Curious to hear your thoughts: I am hesitant to go to a "small" bow and then you show this one reaching out to 100 yards . . . I have seen a couple others do the same. Would you still choose this bow, or the 34" or what if there was a 33" (rumored to be coming in 2025) if you only got one bow every few years? I thoroughly enjoy watching your posts, have enjoyed meeting you at a few TAC's, (Colorado "He's Rik, I'm Brian, and he's Bryan Ricks" LOL) but I don't get companies sending me bows to try and make videos. (No offense) I'm just an average archer out here who loves the sport - but no one cares what I think or sends me items to review. I have the 2019 Carbon Stealth, have enjoyed it very much - but feel it may be time to upgrade but not sure I want to go to a 30" A2A bow. The results I see are impressive, and hope PSE does come out with this in a 33". This MACH 30 looks awesome and I see impressive shots taken with it (like yours). Would "you" shoot a 30" bow/this one, if it were the one bow you were to buy and shoot for the next few years? And what about the 80lb limbs option? Thanks for your consideration, Rik "Florida Boys" 🏹
The shorter the axle to axle with a long draw length tends to cause nock pinch. And it can and will lift the arrow off the rest. If you have a shorter draw length you'll be fine. If your drawing 30 inches on a 30 inch axle to axle you will get a narrow valley in the string causing nock pinch. I have a 30 inch axl3 to axle pse with a 27.5 draw length and it nock pinches bad.
But with some of the newer bows the cams flip up and increase the valley on some shorter Ata bows. I would go to archery shop and test a shorter Ata bow and see if you like it or it causes unwanted issues
28.5 draw for me, I have shot this bow at a TAC, but not out on the course. Just at the tent. It feels great. Just not sure if someone like John would shoot this or stay longer A2A if he had to purchase it for his "one bow". (?)
Lay an arrow shaft on the side of the cam it shows you the cam lean vs the string.
Why does your moch 30 have the cable slide but the public models have rollers???
Ordered the t2 broadheads today. Looks like they will be awesome.
Love the bone breaker bow. I test shot the 30 and man I almost sold my motorcycle to afford this. Almost. Would love to see this stuff also included on the new levitate.
Bought the Nock 30 for my new bow! Love it to death!!! hope to see you at Utah TAC so you can sign the Limb.
Wish other manufacturers had this.
The “Arctic Slayer” 😂
White Chocolate....just like Jason Williams 😂
This should d e good an Informative thanks
I wish I could get my hands on one! My local dealer in Metro Atlanta can’t get the carbon PSEs right now. I’ve been calling every week and checking
eBay brotha. Got mine in 4 days
@@nickguerrero5184 I’ll check thanks
Atlanta!? Yuck!
I have a Mach 30 purchased in April with 40 shots through it if you're interested lol
Frozen Thunder, named after the Canmore Nordic Center AB
What’s wrong with Panda Express lol
I like Panda Express as well! Or you could go with Trash Panda! Lol!!
Perhaps explain why you consider adjusting cam lean at all without even shooting? Cam lean is inherent in any system and generally necessary to achieve solid flight.
Too much cam lean can cause string derailment uneven wear on the cams. Also cause vibration and noise one limb is being pulled more then the other its not good. Checking axle to axle measurements on both sides match the manufacturer Ata length if both sides are even or same measurement your good to go. Ata is more important imo.
Call it “White Shadow”!
What is that extra "small wheel" sticking out of the center of your Spot Hogg adjustment wheel?
New spot hog design adjustment
@mikeok5682 couldn't find anything on their website
The new bow should be called the stormtrooper
BAMF🤙🏾
We saw the red release dud when you were shooting through paper
Ideas of what it is ?
Curious to hear your thoughts:
I am hesitant to go to a "small" bow and then you show this one reaching out to 100 yards . . . I have seen a couple others do the same.
Would you still choose this bow, or the 34" or what if there was a 33" (rumored to be coming in 2025) if you only got one bow every few years?
I thoroughly enjoy watching your posts, have enjoyed meeting you at a few TAC's, (Colorado "He's Rik, I'm Brian, and he's Bryan Ricks" LOL) but I don't get companies sending me bows to try and make videos. (No offense) I'm just an average archer out here who loves the sport - but no one cares what I think or sends me items to review.
I have the 2019 Carbon Stealth, have enjoyed it very much - but feel it may be time to upgrade but not sure I want to go to a 30" A2A bow. The results I see are impressive, and hope PSE does come out with this in a 33". This MACH 30 looks awesome and I see impressive shots taken with it (like yours).
Would "you" shoot a 30" bow/this one, if it were the one bow you were to buy and shoot for the next few years? And what about the 80lb limbs option?
Thanks for your consideration,
Rik
"Florida Boys"
🏹
The shorter the axle to axle with a long draw length tends to cause nock pinch. And it can and will lift the arrow off the rest. If you have a shorter draw length you'll be fine. If your drawing 30 inches on a 30 inch axle to axle you will get a narrow valley in the string causing nock pinch. I have a 30 inch axl3 to axle pse with a 27.5 draw length and it nock pinches bad.
But with some of the newer bows the cams flip up and increase the valley on some shorter Ata bows. I would go to archery shop and test a shorter Ata bow and see if you like it or it causes unwanted issues
28.5 draw for me, I have shot this bow at a TAC, but not out on the course. Just at the tent. It feels great. Just not sure if someone like John would shoot this or stay longer A2A if he had to purchase it for his "one bow". (?)
How far was the Elk?
100 yds...This dude is sick!
Hachiroku
The white zombie
Name nomination, Domino
That thing is sweet…yummy
Twisted steel and sex appeal
call that sucker"skunk works"
So sick of a bow. Wish I could afford one of those bad boys. My evl 32 is alright!
Nice bow but I’ll stick with my king cobra