⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Auto Repair Guys one thing guys you'll never explain the whole process through. I watched this video a few times to get prepared to do mines. You'll never explained to be careful when replacing the valve body back on because of the selector rod that has to be attached to the mechanism that allows you to shift. The yellow plastic piece will break if you do not attach it firmly in to position. It is still a good video to learn from but needs more information.
You guys rock. I was dreading this project for more than 6 months and when I finally got the guts to attempt it, everything went just as you described and my ML320 is now on the road again. Replacing the contuctor plate was a whole lot easier than I ever imagined. Thanks a million.
I'm not. Gonna lie I've. Been watching n debating I also tried to find other mechanic to do it.after seeing your comment I gonna try it myself wish me luck
Thank you so much. I have used this channel and your main channel for so many repairs for my 2005 ML500. It now has 250k miles on it. Changed the radiator, engine mounts, and now conductor plate myself. And I'm in real estate, now a mechanic, haha!
I owe you! My 1999 ML 320 had strange transmission troubles which seemed to be getting worse. I put off looking at it for more than a year because I thought the worse. I watched your video, bought the conductor plate and other things I needed and got to work. I will also say, this work was pretty easy to perform too. I think most anybody with any mechanical skills can do this. My ML320 which has 138k miles is running and shifting perfectly.
GREAT VIDEO: CONDUCTOR THE MECHANIC CHARGES 200 TO 300 AND MB DEALER CHARGES 600 FOR LABOUR . GREAT WAY TO SAVE BY DIY .. IN ML 320 ITS 8.5 LITERS, TORQUE 6 NM FOR THE COVER SCREWS AND 20 NM OIL BOLT.. PLEASE USE OEM OIL FROM PENTOSIN ATF 1LV ($84 FOR 2 CANS OF 5 LITERS AT AMAZON ) + $55 FOR TRANSMISSION CONDUCTOR/FILTER/SEAL RUBBER AT EBAY. WHEN YOU RUN THE CAR FOR 20 MILES OR SO THE CODES WILL BE RESET. IF NOT THEN REMOVE THE CABLE FROM THE BATTERY FOR SOME TIME AND THEM RECONNECT. .. TAKE ADVICE WATCH AS MANY VIDEOS AS YOU CAN AND BE A DIY SAVE YOURSELF GOOD MONEY AND GAIN KNOWLEDGE ABOUT YOU CAR... THANK YOU ONCE AGAIN FOR THE VIDEO..
Hello, great video...I have the same model (W163) but 1998 model. Do you know which is the repait kit (overhauling I guess is the name) for the automatic transmission? I need the complete one in order to run a full repair of the transmission...Thank youand looking forward.
Hey buddy, thanks for the great video. I've done this procedure and followed all the online suggestions but now I have a error code. P2106 The internal electrical check of component y3/6y6( torque converter lockup PWM solenoid valve) has failed. I clear it and it works then comes back. I don't know what to do anymore. Can you please explain? Any help would be helpful.
I have a Mercedes w210 e240 with the code "fault is stored in component N15/3 ( electronic transmission control (etc/egs) module) . P0715 and I changed the conductor plate and the speed sensor had a crack but car still has the same problem as before do I need to program something?
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Auto Repair Guys one thing guys you'll never explain the whole process through. I watched this video a few times to get prepared to do mines. You'll never explained to be careful when replacing the valve body back on because of the selector rod that has to be attached to the mechanism that allows you to shift. The yellow plastic piece will break if you do not attach it firmly in to position. It is still a good video to learn from but needs more information.
You guys rock. I was dreading this project for more than 6 months and when I finally got the guts to attempt it, everything went just as you described and my ML320 is now on the road again. Replacing the contuctor plate was a whole lot easier than I ever imagined.
Thanks a million.
I'm not. Gonna lie I've. Been watching n debating I also tried to find other mechanic to do it.after seeing your comment I gonna try it myself wish me luck
Thank you so much. I have used this channel and your main channel for so many repairs for my 2005 ML500. It now has 250k miles on it. Changed the radiator, engine mounts, and now conductor plate myself. And I'm in real estate, now a mechanic, haha!
I owe you! My 1999 ML 320 had strange transmission troubles which seemed to be getting worse. I put off looking at it for more than a year because I thought the worse. I watched your video, bought the conductor plate and other things I needed and got to work. I will also say, this work was pretty easy to perform too. I think most anybody with any mechanical skills can do this. My ML320 which has 138k miles is running and shifting perfectly.
HI! Do You Know How Many Quarts Of Transmission Oil For ML320?
GREAT VIDEO: CONDUCTOR THE MECHANIC CHARGES 200 TO 300 AND MB DEALER CHARGES 600 FOR LABOUR . GREAT WAY TO SAVE BY DIY .. IN ML 320 ITS 8.5 LITERS, TORQUE 6 NM FOR THE COVER SCREWS AND 20 NM OIL BOLT.. PLEASE USE OEM OIL FROM PENTOSIN ATF 1LV ($84 FOR 2 CANS OF 5 LITERS AT AMAZON ) + $55 FOR TRANSMISSION CONDUCTOR/FILTER/SEAL RUBBER AT EBAY. WHEN YOU RUN THE CAR FOR 20 MILES OR SO THE CODES WILL BE RESET. IF NOT THEN REMOVE THE CABLE FROM THE BATTERY FOR SOME TIME AND THEM RECONNECT. .. TAKE ADVICE WATCH AS MANY VIDEOS AS YOU CAN AND BE A DIY SAVE YOURSELF GOOD MONEY AND GAIN KNOWLEDGE ABOUT YOU CAR... THANK YOU ONCE AGAIN FOR THE VIDEO..
Thanks for the tip but what happens if the bolts are not torqued?
Hello, great video...I have the same model (W163) but 1998 model. Do you know which is the repait kit (overhauling I guess is the name) for the automatic transmission? I need the complete one in order to run a full repair of the transmission...Thank youand looking forward.
Love that bonnet support.
Very good video!! Well filmed and great step by step instructions. you guys are very helpful. THANK YOU for making the video!!
Ml is a great truck thanks to your videos!
THANK YOU VERY MUCH 👍👍👍👍👍👍👍👍👍👍
HI, excellent video, how many oil liters do you used? thanks
How can you tell if it's bad the conductor plate.. what is the code for that? Nice video 👍👌👍👍
P0715
@@Marki557 thank you 👌
Hey thanks alot for showing me this. I really appreciate you doing these kind of videos thank you
SHOW DE BOLA AJUDA MUITO A GENTE AQUI NO BRASIL JA QUE SAO POUCOS ML 320
Question?? After I replace the conductor plate, do I have to take the vehicle to mercedes to re program the software? Pls let me know thanks.
Hey buddy, thanks for the great video. I've done this procedure and followed all the online suggestions but now I have a error code. P2106 The internal electrical check of component y3/6y6( torque converter lockup PWM solenoid valve) has failed. I clear it and it works then comes back. I don't know what to do anymore. Can you please explain? Any help would be helpful.
Did yoy figure out the problem? How did you erase the code? Did you fix the solenoid?
I have a Mercedes w210 e240 with the code "fault is stored in component N15/3 ( electronic transmission control (etc/egs) module) . P0715 and I changed the conductor plate and the speed sensor had a crack but car still has the same problem as before do I need to program something?
So i have to replace the selenoids cover also or not???
thanks for the video .
You guys are pretty awesome👍
You are the best
love your videos just wish you dont put these anoying music
did you need to clear the error codes or was it fine by just replacing conductor plate?
gotta clear the codes
merci beaucoup vous etre formidable
Hello can help me i broke the blue plastic cap
Men I did every step now my car won't move