Awesome tutorial! I disassembled an old bearing to wear as a ring and it worked like a charm. Also if anyone is curious, skate bearings are almost exactly a size 9!
This is a very useful tutorial, being able to completely assemble/disassemble a bearing gives you an ability to take maintaining of your skateboard to another level
Thank you for this. I rebuilt my old bones ceramic bearings with this video, and pm swapped out the bearings themselves into super red housings. You saved me hundreds
aww yes, I did it! the shield tip is what I needed , I put the middle thing in first and then squeezed the balls in with a help of a tool. so much for the cleaning.. putting it back together was such work that they're all sweaty :D
I have watched all the videos on putting bearings back together and tried them all and failed.... I watched your video one time and I was able to put the bearings back together first try.... THANK YOU!!!!
I recommend putting the shield in and putting metal middle piece in and then the bearing balls it requires a lot of force but works for me When I mean a lot of force I mean A LOT of FORCE
Also you have to make it just perfect of it will require too much force if you don’t get it perfect enough that’s the problem with all these ways of doing it you have to have an almost perfect and a lot of people can’t get things that perfect that’s the problem
This man is a genius. If all the balls are equidistant from each other, there is no gap. So you remove the cage to allow you to push them all to one side and now there is a big gap for the inner race to slide out. So simple yet so effective! Much better than trying to hammer everything out like I was doing.🤣
Great video... I had tried everything... Gave up... Stumbled across this video... Done in in 5 minutes... Safe to say I won't strip one completely again
Do you do this every time you cleam them? Doesnt damage the cage? And can we mix all the disassembled bearings (for shaking in jar with cleaner) and then assemble them all mixed? (At least if they are all from the same brand and model?)
the cleaned bearing spun better because it had no lubricant, unlike the factory bearing. this is fine and all, but if they're the same type of bearing, then the performance would be pretty dang close (if not exactly the same) with the same amount and type of lube.
Pro tip, Never EVER take apart more than one bearing at a time. I just fucked my Bones super Reds cause they needed to be thoroughly cleaned from all the gunk I built up. I took out all the balls from all the bearings to let them soak in a cleaner but little did I know that they were all manufactured perfectly per bearing. Because all the balls were mixed up it was impossible to put them back in their original casing. Even though you cant see it, the balls are different sizes and wont fit perfectly if you put them in mixed up. Always make sure you clean one at a time so you don't get the balls mixed. Or, you know, just don't take them out...
Just flopped on my super reds then saw this comment. How do u know that they’re different sizes? I’ve cleaned regular reds in a similar fashion and they seem fine.
I used ABEC-11 608 2RS, however, I would recommend something like these: Green Slime ABEC-11 www.amazon.co.uk/dp/B00M0F3J5Q/ref=cm_sw_r_tw_dp_x_fwCZyb2Q94YXC
Awesome tutorial! I disassembled an old bearing to wear as a ring and it worked like a charm. Also if anyone is curious, skate bearings are almost exactly a size 9!
Cool idea man.. Reminds me of how the BMX kids would recycle their bike chains into bracelets.
Worked first try, that shield first method is the best I have found while failing for an hour or two! Thanks a lot :D
This is a very useful tutorial, being able to completely assemble/disassemble a bearing gives you an ability to take maintaining of your skateboard to another level
Thank you sir, watched a ton of videos trying to figure out how to put my bearing together and finally found the messiah
Thank you for this. I rebuilt my old bones ceramic bearings with this video, and pm swapped out the bearings themselves into super red housings. You saved me hundreds
aww yes, I did it! the shield tip is what I needed
, I put the middle thing in first and then squeezed the balls in with a help of a tool.
so much for the cleaning.. putting it back together was such work that they're all sweaty :D
Thank you for the video, I thought I was never going to get it back together. Got it the first try after your vid🙏
I have watched all the videos on putting bearings back together and tried them all and failed.... I watched your video one time and I was able to put the bearings back together first try.... THANK YOU!!!!
askain111 right
I recommend putting the shield in and putting metal middle piece in and then the bearing balls it requires a lot of force but works for me When I mean a lot of force I mean A LOT of FORCE
Also you have to make it just perfect of it will require too much force if you don’t get it perfect enough that’s the problem with all these ways of doing it you have to have an almost perfect and a lot of people can’t get things that perfect that’s the problem
This man is a genius. If all the balls are equidistant from each other, there is no gap. So you remove the cage to allow you to push them all to one side and now there is a big gap for the inner race to slide out. So simple yet so effective! Much better than trying to hammer everything out like I was doing.🤣
This works so well it helped me very easily I just kept struggling but this is just genius
Great video... I had tried everything... Gave up... Stumbled across this video... Done in in 5 minutes... Safe to say I won't strip one completely again
I got one question why is the category of this vid gaming
This was so useful! I tried the classic way to do it but it didnt work. It just stressed me out. This was super useful. Thanks.
this helped i took a wall of another baring and put it on my center so it would hold the balls in im so happy now YES
Thanks so much ! That had me stuck forever!Much Gratitude
Wow it was so easy and good had been stugeling for hours
Super helpful video :) Thanx, bro!
Wow, thanks soo much! I put back together Bear Spaceballs. Not as easy as in the video haha but I made it om the fourth try, I am so proud now :D
This saved my sanity.
Great how to. Thanks!
Thank you so much I was struggling for like 2 hours
Thank you so much! Helped a lot
Omg thank you, I was cleaning some bearings and just couldn’t get the ball bearings to align
thanks you so much I've being watching like 100 tutorial but with yours i finally put them in like and subscribe you deserved
of all the videos i watched this was the best one! you earned yourself a subb
Do you do this every time you cleam them? Doesnt damage the cage?
And can we mix all the disassembled bearings (for shaking in jar with cleaner) and then assemble them all mixed?
(At least if they are all from the same brand and model?)
Btw, thanks for the video, I would never haven't thought to place the shield first
you´re a hero!
Great video! I was shiddng
brix!
THANK YOU cowtc. THIS WAS THE MOST HELPFUL VIDEO FOR ME THANK YOU VERY VERY MUCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
the cleaned bearing spun better because it had no lubricant, unlike the factory bearing. this is fine and all, but if they're the same type of bearing, then the performance would be pretty dang close (if not exactly the same) with the same amount and type of lube.
thx it worked all the other methods were difficult
Very helpful. Thanks.
worked second try thanks man good vid
Thanks so much the tutorial was great keep up the great work, you earned yourself a sub, good work!
Thank you so much I was panicking
Best tutorial out there
Very helpful thanks!
you help me out so much thank you
Great Job !!!
OMG I AM SO HAPPY NOW I JUST SUBBED
U have one of the easiest so far dude wish I could repay u 👌👌
Thanks I made it into a ring for my wife she loved it Cuse she know what it was lol
so cool!!!!! thanks the video i actully fixed my fidget spinner thanks cowtc your the bessssst
this is the Best wat To put back bearing,I Just do it In 5minute
i put them alll back together but they don't roll properly anymore now, any tips?
Only thing I can suggest is take it all apart again and use some kitchen towel and clean the balls so they don't have much grease on them
@@cowtc i'll try that, thanks for your suggestion!
YOURE THE BEST MAN YOURE GREAT IM LIKING AND SUBBING!!!!
Are the shields necessary? I'd like to remove them from my spinner
Shields aren't necessary, only the nylon cage is required to keep the balls from dropping out
cowtc i can't do it because it's too hard pls can u help me?
Thank you sooooooooo much :-)
this is helpful
Thank you so much
thanks
Pro tip, Never EVER take apart more than one bearing at a time. I just fucked my Bones super Reds cause they needed to be thoroughly cleaned from all the gunk I built up. I took out all the balls from all the bearings to let them soak in a cleaner but little did I know that they were all manufactured perfectly per bearing. Because all the balls were mixed up it was impossible to put them back in their original casing. Even though you cant see it, the balls are different sizes and wont fit perfectly if you put them in mixed up. Always make sure you clean one at a time so you don't get the balls mixed. Or, you know, just don't take them out...
You could always try and weigh each ball with a digital gram scale. Might be able to re-unite the correct sizes that way.
Just flopped on my super reds then saw this comment. How do u know that they’re different sizes? I’ve cleaned regular reds in a similar fashion and they seem fine.
bro can you share the link of the bearings used in the video for buying
I used ABEC-11 608 2RS, however, I would recommend something like these: Green Slime ABEC-11 www.amazon.co.uk/dp/B00M0F3J5Q/ref=cm_sw_r_tw_dp_x_fwCZyb2Q94YXC
cowtc thank you bro
TV SHOWS shut up
The middle ring in the bearing is stuck to the plastic...😭
Guys if you’re doing this for skating make sure you lube your bearings
my spinner came with no sheilds 😢
Daniel Gonzales same
I have tried to reassemble 7 ball bearing with no success so after half an hour of fiddling with it I fucked it up and dumped the whole process.
YOUR SO SMART
thank you so much! this was a great video! i liked and am going t
o subscribe! this helped so much!
WHATS THIS SONG CALLED IT'S GREAT
You just saved me😭😭😭😭
My bearing has 2 metal cages from both sides
didn't work for me at all
awesomedrock g shut up
Wont work
I will just pay $15 for new bones....
Pokemon +1