Just remember that parkside batteries have a battery monitor chip, it asks the charger to supply a charge and it balances the cells. If you use a parkside battery in anyother tool or project and you discharge it belowe 0%, the chip will register that as a cell fault and will not activate the charger for your safety, I have 3 packs like this, I have not found a way to reset the chip and I have tried many times with many different methods. some Aldi 20v ferrex batteries have protection built in to prevent this, so a much better choice
@@makeandfixathome If we take the charger, spray some oil (lubricant) on it and then press it in the silicone? Or do the same to the battery and use it as a mold for the resin if possible
3D printer not required!
Do we need to oil/lubricate the contacts or the plastic or it removes anyway?
one point sir. At 8.40 video when pour the catalyst first you said 1.5gr...then a pop up showed 1.5 = 5. Can you explain, please?
Great video. Were can I get a vice like that. I am in UK.
Zyliss Profi King vintage from 80's - only eBay I think!
Thank you very much.
Just remember that parkside batteries have a battery monitor chip, it asks the charger to supply a charge and it balances the cells.
If you use a parkside battery in anyother tool or project and you discharge it belowe 0%, the chip will register that as a cell fault and will not activate the charger for your safety, I have 3 packs like this, I have not found a way to reset the chip and I have tried many times with many different methods.
some Aldi 20v ferrex batteries have protection built in to prevent this, so a much better choice
Thank You for your comment. i also make this video ua-cam.com/video/zVwjPAbqvfk/v-deo.html
You going to the Makers fair in Nec ?
hello dr Pipe this Saturday and Sunday, right? Not far from me, but I'm not sure yet. Tickets are still available :)
Great video. Were can I get a vice like that. Never seen one like that. I am in UK.
Thank You, My Friend!! This is a Zyliss Profi King vintage from 80's. look on Ebay Grettings
Where did you source the silicone kit and what was the duromor number of the casting silicone (hardness)?
Try "EA silicones" - silicone RTV2025 / catalyst CA30 - Tensile strength (Mpa) -32
Regards
That guy flying like superman 😂people need to stick the 3d printers where it don't shine pompous Prics 😉😂😂😂......
You're right !! you noticed the guy !! Thank you, my Friend👍
@@makeandfixathome that made my day bro I always use snips and stuff flying to other side of the room 😂😂😂
@@davey2k12 😁👍
Merci beaucoup pour la vidéo
Your welcome :)
Does it really works?
YES, You will see it in the next video! Regards ON TO ON 👌
@@makeandfixathome thanks, can't wait
Hallo sir... can you make tutorial make socket type LXT sir??
for Makita?
@@makeandfixathome yes sir...
sorry for being boring, but I really liked this girl or table vise, could you please give me the link where you bought it? Thanks
look on eBay zyliss vise profi - king ! I bought mine in 90's, so impossible to buy a new one
Buen vídeo 👌👍
Toquemos madera Thank You !!
Really nice video's i see you use a lot of these plastic strips seems easy to use. Where do you get those ( how is it called ? )
just a plastic strip with (Sookwang) Double-sided Tape. (ebay) (ali...), but Sookwang is helpful but not necessary. Hot Glue is the point :) Greetings
This tool battery holder exist for Bosch and other brands, for few dollars. But for Parkside ?
I saw 3D printed only :)
Any easier method to make silicone mold?
let me think about... ;)
@@makeandfixathome If we take the charger, spray some oil (lubricant) on it and then press it in the silicone? Or do the same to the battery and use it as a mold for the resin if possible
@@flowinthrou Try and let me know about the result :) Greetings
👏👏👏
Why don`t we use epoxy resin straight to the battery as mold?
No voice discrimination
👍👍
И за чем это? 🤯
to make this : ua-cam.com/video/J8-uJRzEecE/v-deo.html
Барбос.............
Parkside 20-li b2 not working 😂😂
👏👏
Thank You 👍