Can you make a video on how to make it work? I just seen how to created a structure of a double waterfall. I dont see how it work cuz all i see "it ready to place in aquarium" and boom!!! Walla!! It suddenly work without a proper way how to make it work
Do you have to frequently move the sand yourself to get it to continuously flow? Or does it always flow into the intake? I'm having a lot of troubles with this
I already did everything step by step and the sand does not rise the pressure of the water comes out of the hole it has for the sand. how can I solve that
i have a couple of questions: 1>what glue did you use to stick the rocks? I used hot glue gun and the structure failed immensely. 2>what kind of power head or pump is used. i used a 18w pump, but the pump stopped working in around 20 minutes. this happened twice..
I used Ethyl Cyanoacrylate glue (do not use hot glue gun !). Put fine soil or coffee in the slit of the stone before glue so that it is tightly bonded. I used 12-18 W PH and work normally 24H/day (continuosly). Attention to the construction of "T" connector.
Hi, really helpful video, thank you! Following your steps I’ve built the same waterfall and tested it in my tank first. I’ve got a problem. I tested it with a bowl of sand attached to the pipe and the water was pushing the sand up from the bowl. Nothing going up to the pipes where it supposed to go. Any suggestions? I think, I might have too big opening in the T connector. Any help will be highly appreciated.
Based on my experience, 1. The possibility of a hole in the "T" connection is too large or too small. 2. Less pump power. If the hole in the "T" connection is too small it can be tried by increasing the push strength of the pump. I hope this helps.
For the silica that is really fine, U should use an air pump for locomotion of the sand, instead of water pump, or a power head, and for this purpose , You should use 1-2 mm granulation silica. P.S. Sorry to jump in the conversation, I just tried to be helpfull.
Brother pls suggest me clay or type of putty safe to aquarium and also available online to build light weight toys or sandfall. Expecting ur reply on early basis.
Bro first of all it was awesome I tried to replicate it but I couldn't I think my issues in pipe size and sand can you please tell me what is the pipe size you are using and sand size then how much sand I need to put in that hole Your reply really will help me thanks
The pipe size 15mm (inner) and 16mm (outter). If the size doesn't match the power head, you can use a plastic hose as a connection. Hose diameter size adjusts to your needs. The amount of sand depends on the size of the waterfall. When it runs, the sand below must always be there and close the hole.
What connections did you put on the end of the powerhead to connect it. I wanted to use 1 inch pvc, but had to switch to 1/2 inch cpvc to get the sizes right to connect to the connection on the pump.
What rocks did u use mate to make the waterfall and did u have to treat the cement after it dried to make it fish safe pls get back to me on this many thanks your waterfall was amazing PS and what glue did u use can I use superglue for this project?
I use Eragon or Dragon stones but you can use other stones for aquascape like Lava rock or Black Pagoda. To attach stones can use superglue as long as it contains cyanoacrylate ingredients. Remember to use coffee powder or fine soil when glue. The use of cement is actually only optional, if you use cemet it should be soaked or smeared with acid or vinegar first for 24 hours to be safe for fish. It's all just my experience. Thank you, hope it's useful.
Thank umy friend 1 last question if u would be so kind to get back to me when u say use vinegar do u mean regular vinegar what u put on fish and chips or do that have to be a special type?
Great video but it could be more detailed ie how you installed it into the tank showing power head used etc, details of glue that you used and reason for adding the soil
@@HasnahKamilah bro which glu u used and where I I'll found that glu and 1 question is also that what is that thing which u used b/w to stones soil or sand
Sebelumnya pasir silika harus dibersihkan dengan air. Kalau mau yang bagus dan cepat bersih bisa pake merek Candila (lumayan mahal). Saya sendiri pake pasir silica yang murah setelah satu hari saya ganti air. Itu hanya pengalaman saya aja.
I m using power filter pump. My problem is that in water fall we need to fall sand instead of falling sand, water is leaking. So pls solve my problem. And also tell me length and hight of pipe for waterfall.
Really helpful awsome video
Thanks
Which sand it is?
Athish Sarode silica sand
The most beautiful water falls
It's beautiful , what is the power of the pump and its flow. Thank you
Can you make a video on how to make it work? I just seen how to created a structure of a double waterfall. I dont see how it work cuz all i see "it ready to place in aquarium" and boom!!! Walla!! It suddenly work without a proper way how to make it work
Dear Sir, I wanna see how to connected output power head.
same here. Please show the connection process.
I really believe this is a onetime thing
He just put a small pump directly on the input.
Sir very well made sir what is the width of this pipe and what is the water flow of power head
Super mantap bozku👍👍👍👍
Do you have to frequently move the sand yourself to get it to continuously flow? Or does it always flow into the intake? I'm having a lot of troubles with this
Hi Hasnah, this is awesome have you thought of selling these and for how much?
i have one of this but my water gets cloudy
help
you should change the sand you're using as waterfall
Very good technic thnx for sharing can you please tell me how much rock u used 1kg or 2
What is that flowing white ? Is it sand ?
This is one of the best I've seen, it's so beautiful. I LOVE the little fence around the front, did you just use sticks to make it? Any coating?
Do you connect to a power canister filter or a ir line
Thanks for ur valuable ideas sharing wit us... excellent
Bhai can i use 18 w water pump and 25mm pipe
I already did everything step by step and the sand does not rise the pressure of the water comes out of the hole it has for the sand.
how can I solve that
Same problem for me. Do. U have. Solution
i have a couple of questions: 1>what glue did you use to stick the rocks? I used hot glue gun and the structure failed immensely. 2>what kind of power head or pump is used. i used a 18w pump, but the pump stopped working in around 20 minutes. this happened twice..
I used Ethyl Cyanoacrylate glue (do not use hot glue gun !). Put fine soil or coffee in the slit of the stone before glue so that it is tightly bonded. I used 12-18 W PH and work normally 24H/day (continuosly). Attention to the construction of "T" connector.
@@HasnahKamilah hey thanks for the reply.
supergluegel works too
Hi, really helpful video, thank you! Following your steps I’ve built the same waterfall and tested it in my tank first. I’ve got a problem. I tested it with a bowl of sand attached to the pipe and the water was pushing the sand up from the bowl. Nothing going up to the pipes where it supposed to go. Any suggestions? I think, I might have too big opening in the T connector. Any help will be highly appreciated.
Based on my experience,
1. The possibility of a hole in the "T" connection is too large or too small.
2. Less pump power.
If the hole in the "T" connection is too small it can be tried by increasing the push strength of the pump. I hope this helps.
Hasnah Kamilah thank you. It’s workin as it supposed to be with the tank filled with water completely and reduced airpump power.
Brilliant video. Iv bought silica sand before but was really fine and just blow everywhere. Can I ask which one you use. Thanks
It's best not to use Silica that is too smooth. That is only my experience.
For the silica that is really fine, U should use an air pump for locomotion of the sand, instead of water pump, or a power head, and for this purpose , You should use 1-2 mm granulation silica. P.S. Sorry to jump in the conversation, I just tried to be helpfull.
my water is cloudy after the waterfall works. how do you fix this?
Superbly done 😎 Thanks for sharing
Does any glue works for it? Like for example, shoe glue?
What gpm pump do you recommend?
Can you tell me what glue you are using?
Keren gan,,,klo saya buat waterfall 2 lobang dari styrofoam alhamdulilah berhasil
Brother pls suggest me clay or type of putty safe to aquarium and also available online to build light weight toys or sandfall. Expecting ur reply on early basis.
Sorry I don't know because all this time I made it with a sponge coated with cement or stones arranged and glued.
Bro first of all it was awesome I tried to replicate it but I couldn't I think my issues in pipe size and sand can you please tell me what is the pipe size you are using and sand size then how much sand I need to put in that hole
Your reply really will help me thanks
The pipe size 15mm (inner) and 16mm (outter). If the size doesn't match the power head, you can use a plastic hose as a connection. Hose diameter size adjusts to your needs. The amount of sand depends on the size of the waterfall. When it runs, the sand below must always be there and close the hole.
Thanks for your quick reply bro
WOW !!!! VERY NICE 😂
*Also mention the measurements and products that you are using - that will be really helpful..thank you*
Hi..may i ask what kind of sand did you use??
Silica sand... didn't you watch the video?
Water motar pump kirne watt ka lena chahiye
can you include in the list below the materials needed? so that viewers maybe guided well. thanks.
Hii bro ye rocks kahaa milenge hume???
What connections did you put on the end of the powerhead to connect it. I wanted to use 1 inch pvc, but had to switch to 1/2 inch cpvc to get the sizes right to connect to the connection on the pump.
Kerennnn. Dik mau coba belajar bikin dik....sukses ya dik silaturahmi ...
😍😍😍
What rocks did u use mate to make the waterfall and did u have to treat the cement after it dried to make it fish safe pls get back to me on this many thanks your waterfall was amazing PS and what glue did u use can I use superglue for this project?
I use Eragon or Dragon stones but you can use other stones for aquascape like Lava rock or Black Pagoda. To attach stones can use superglue as long as it contains cyanoacrylate ingredients. Remember to use coffee powder or fine soil when glue. The use of cement is actually only optional, if you use cemet it should be soaked or smeared with acid or vinegar first for 24 hours to be safe for fish. It's all just my experience. Thank you, hope it's useful.
Thank umy friend 1 last question if u would be so kind to get back to me when u say use vinegar do u mean regular vinegar what u put on fish and chips or do that have to be a special type?
Where i can buy the white tube and elbow?
What pump you use
Mind-blowing bro.. super...
Simply Ossssssssm 👏👏👏👏👍👍👌👌👌👌thnx for sharing.
Awesome tank. What sand did you use? I am having a hard time finding the right size "white" sand atm
What’s the best sand for this
Great video but it could be more detailed ie how you installed it into the tank showing power head used etc, details of glue that you used and reason for adding the soil
You may see detail on this video ua-cam.com/video/bONIV3W3ATc/v-deo.html The stones will not glue if we only use glue (without soil)
Very nice.
Thank you.
Wich powerunit do u use
Can you do tell me what kind of glue you have used ?
Which Glue is used?
Awesome but ye work krte hue video bnaye pls
can u tell me what type and power of waterpump?
I used Amara 1200
My friend I have another question what makes the white sand flows like that ? What did you attach at the back to make it flow?
Pump maybe
Bro iss water me kuch milaye ho ya common water h
Sorry, I don't understand your question. English please...
What is size of pipe? 16mm or 20mm?
Stone ko super glue se chipkaya.?? Is ki jagah silicon ya glue gun se chipka sakte he .???
Probably the silliest question but, did U make that cute little fence or did U buy it somewhere?
I want the fence. Haha
Great videos.
Really very nice and helpful but please also let us know how to fix pump and pipes. Please Thank you.
You can use a suitable pipe connector. If not, you can use a plastic hose.
I was trying to make this one but the problem is that water is coming out from the t shaped pipe. 😔
OMG!! Super cool brother. Keep inspiring 👍
nobody shows where they place the pump and how they protect it from debris in the tank water from ruining it
It would loo awesome with some Celestial Danios as well! Love the set up!
Bhai ye fountain kaise set hua Pani kaise aa Raha h ret wala
Every time I tried the water goes upwards rather than falling downwards. Plz help!!!
there is usaly a dial somewhere on the bottom or back that lets you change the pressure and how high it shoots
That's dope my man
Nice vid! May I know what size of the pipe is?
Thanks!
I try to make this but it's not work because t point raise water
Nice video 👍👍👍👍👍
Bhai glu kaun sa use kiya hai aur ye soil hai ya sand
English please !
@@HasnahKamilah bro which glu u used and where I I'll found that glu and 1 question is also that what is that thing which u used b/w to stones soil or sand
bonjour vous aves utiliser quoi comme pierre c'est super chouettedu coup on s'est pas comment vous avez recoder votre cascade
what is the pipe size?
Nempelin batu nya cuman pake lem Korea sama ampas kopi doang ya?
Muito lindo parabéns
Thanks bro..
Awsm awsm video brother u hv done brilliant work ......
👌superb
Hello...pasir saya bertaburan seluruh aquarium....pasir terlalu halus atau pam terlalu kuat?
How to use silika sand into this pipe
I hope this video link can help you ua-cam.com/video/bONIV3W3ATc/v-deo.html
whats that rock called?
Awesome!!!!!
Gimana om ngatasi pakek air terjun imbase air jadi kelihatan berkabut fltre ngak mampu bersihkan nyampek 3 hari
Sebelumnya pasir silika harus dibersihkan dengan air. Kalau mau yang bagus dan cepat bersih bisa pake merek Candila (lumayan mahal). Saya sendiri pake pasir silica yang murah setelah satu hari saya ganti air. Itu hanya pengalaman saya aja.
Ijin bertanya kak. Itu pake PH berapa yah?
@@HasnahKamilah saya pakai kandila tetep aja berkabut padahal udah saya cuci sampe bening. Huft
How built power supply
Mera Bhai salamalekum
Ye char ki pipe ka aate vala dhakan aur trans parent pipe kaha see milegi plz javab digiyo
Wa'alaiku salam.
English please..:)
What stone is that?
what is cost
What are the items you need for this?
Om tanya dong, memang perpaduan waterfalls dgn tanaman aquatic apakah baik?
Can i use 25 mm pipe
Where i can find pipe like you used?? And what powered for pump??
I m using power filter pump. My problem is that in water fall we need to fall sand instead of falling sand, water is leaking. So pls solve my problem. And also tell me length and hight of pipe for waterfall.
Can we make mountain with coal?
I have never tried it and do not know whether it is safe for fish and aquascape plants.
Kalo dibikin 3 cabang bisa gak om?
bro i have some question
1- what kind of stone you used
2- what are thous white things which are flowing like fountain?
1. I use Ohko stone but you can use river stone or lava based on your concept.
2. It is white Silica sand.
How did you connect your motor head on that? Can u please tell us. Superb bro 👏👏👏
Hopefully this video can explain that. ua-cam.com/video/bONIV3W3ATc/v-deo.html
could you please suggest me the glue which you used. and also the stones
Tipe of Ethyl Cyanoacrylate glue
Brilliant but I need to know where ad how to connect which power head or pump to plzzz help
Iwata this. What is the price
How to connect input and output
GREAT VIDEO 👍
Are you selling the aquariums
Where to get glue that sticks stones together?
Very creative and beautiful, thanks a lot
which stone use
On this video I used lavarock but we can use various types of stones, the important thing is to be safe for the life of fish and aquascape plants
How do you determine what size pump to use
I used 1000 L/H or 1200 L/H
What things do u use