I think you got a lot of bubbles because you removed the frame wrong. On the website, they show you should pull the 4 tabs and only remove the frame, then the last protective film. Thanks for the video!
Which of those three do you recommend the most? I like how the matte finish is, since it is smoother to touch. However the first one might have a better view…
How does installation get any easier I wonder, I’ve seen numerous videos where creators get no bubbles on the first try with these screen protectors id say if there’s literally a no margin for error just the chance that the adhesion was flawed or started wrong it should get 5 points.
The drop test would be more accurate if the location of the ball bearing was moved after each height. After the first drop in one location, each subsequent drop is hitting an already weakened location.
@@garethalstonIncorrect. Look at MobileReviewsEh and how he tests screen protectors. It’s also common sense that if you drop a ball bearing in the exact same spot over and over, each subsequent drop is impacting a previously weakened spot. For a true test, the ball bearing should be dropped on a new spot for a true representation of that respective drop height.
@@ryanmccarville you’re missing my point. It’s the same for all the protectors he tests bro. They all go through the same drop test mate. So all protectors get treated same. If you don’t like it, make you’re own channel and do it you’re way
100% 😊 PolarSpectra anti rainbow, anti microbial 🦠, 3D infinite edge, smallest black border in the game, case friendly, 15000 swipes electroplating, Lifetime Warrany. 🛡️lessgooo 🚀
No I went through 3 of the matte regular onetime ones in a year due to bubbling along the corners of my phone. I went and replaced with another brand and it’s way better and no bubbles so far. It’s a shame because matte finish was great just didn’t hold up and I am gentle with my device and use a case that worked perfectly with it
It’s a balancing act. If there is too much matte finish, it will be grainy and unacceptable to many. We also add anti reflective coating as well to improve clarity.
This product/application process is completely ridiculous. Followed the instructions & several bubbles under the screen protector that will NOT go away! Waste of money & time. If I press any harder I’ll probably break the actual phone screen.
They advertise the screen protector being able to hit nails into wood no problem but it can't withstand a 3 ft ball drop test...What a shame and what a scam.
I think you got a lot of bubbles because you removed the frame wrong. On the website, they show you should pull the 4 tabs and only remove the frame, then the last protective film. Thanks for the video!
I like how they give a full screen dust remove sticker, a huge benefit compared to the other ones that screen protector install kits come with
The bigger the better 🤜🏼
Great detail as always nice one 😎👍
Which of those three do you recommend the most? I like how the matte finish is, since it is smoother to touch. However the first one might have a better view…
How does installation get any easier I wonder, I’ve seen numerous videos where creators get no bubbles on the first try with these screen protectors id say if there’s literally a no margin for error just the chance that the adhesion was flawed or started wrong it should get 5 points.
There are scratches at a level 5 bc it is wearing away the #5 pick.
Man you earned this thumbs up....great video
Whats the best one of all your videos?
which one u think is the best option? The anti glare or the anti raimbow? Thanks
The drop test would be more accurate if the location of the ball bearing was moved after each height. After the first drop in one location, each subsequent drop is hitting an already weakened location.
It’s same for all the protectors bro.
@@garethalstonIncorrect. Look at MobileReviewsEh and how he tests screen protectors. It’s also common sense that if you drop a ball bearing in the exact same spot over and over, each subsequent drop is impacting a previously weakened spot. For a true test, the ball bearing should be dropped on a new spot for a true representation of that respective drop height.
@@ryanmccarville you’re missing my point. It’s the same for all the protectors he tests bro. They all go through the same drop test mate. So all protectors get treated same. If you don’t like it, make you’re own channel and do it you’re way
Amazing video, thank you for doing what you do
Fantastic review as always ❤ will you be doing Casetify Impact Ultra HD screen protector in the future? 😊
Has the privacy screen protector got 100% clarity. On a white background is text slightly grainy from close up?
I would not say 100% but with AR coating it’s much better than the competition. 💯
I bought it and i can say the clarity is top notch!
Do the onetime pro screen protectors contain their blushield technology?
Do the black borders increase the bezels ???
great video review; thanks. The matte one was great - until the scratch test. yikes!! not good. Pity these are SO expensive in Australian dollars :(
Is it Worth the Price?
100% 😊 PolarSpectra anti rainbow, anti microbial 🦠, 3D infinite edge, smallest black border in the game, case friendly, 15000 swipes electroplating, Lifetime Warrany. 🛡️lessgooo 🚀
No I went through 3 of the matte regular onetime ones in a year due to bubbling along the corners of my phone. I went and replaced with another brand and it’s way better and no bubbles so far. It’s a shame because matte finish was great just didn’t hold up and I am gentle with my device and use a case that worked perfectly with it
does the anti-glare one doesn't have grainy effect on the screen as they claim?
does matte one make screen grainy? or is it better than other generic ones?
I loved the way the matte glass looked, it seemed less grainy then any others I’ve used
How is the text clarity?
Any idea if it’s compatible with the Caudabe sheath
Yes.. I am currently using Sheath and Flolab SP. 👍🏻
That anti glare is not the greatest. You can still clearly see the lights, that should be way more diffused
It’s a balancing act. If there is too much matte finish, it will be grainy and unacceptable to many. We also add anti reflective coating as well to improve clarity.
I got the one time pro on November 11th from Amazon, is there a way to tell if I have the Spectre technology or the older model without using glasses?
You can check the back of the packaging or use polarized sunglasses. Thank your for bringing apart of the fam 🙏🏼
With the privacy screen protector, does Face ID work well?
I didn’t have any issues
No issue. I have got it
Can you tell if FLOLAB 3D screen protector works well with Spigen Enzo Aramid case for 15PM?
Did you tried it?
No as the youtuber did not reply!
@@Dr-HamzaAli well I did, and the screen protector working ok with the spigen enzo aramid
This product/application process is completely ridiculous. Followed the instructions & several bubbles under the screen protector that will NOT go away! Waste of money & time. If I press any harder I’ll probably break the actual phone screen.
Was that Jerry Seinfeld I just saw
They advertise the screen protector being able to hit nails into wood no problem but it can't withstand a 3 ft ball drop test...What a shame and what a scam.