I started my pressure washing business a couple of months ago and started with a 4gpm machine that I just ratchet it down to a trailer and pull it off for each job. I currently have a contract with an apartment complex and their buildings are fairly large, each one is 2 story with 8 units. Each apartment is 1200 to 1700 square feet and a large breezeway in the middle. Each apartment also has an outside patio that I have to clean. Each building takes me on average 6 hours to clean, and I can see where the 4 gpm machine is slowing me down, because I spend most of my time just thoroughly washing off my SH and surfactant from the vynyl siding. I currently only use and xjet with a 25 foot hose to spray my chemical because for 4 of the patios I have to climb a ladder and jump over the railing to clean them, and I like how with an xjet, I can just pull my hose off my gun to stop spray chemical so I don't have to climb over the railing again to take a siphon tube out of a chem bucket for downstreaming and then climg back up the ladder. I am not allowed to drive on the grass with the trailer, which is why I take my pressure washer off the trialer and closer to the building so I can wash the entire building without having to change my water source. I could see a problem with having a system like this with the pressure washer being attached to the trailer, the buildings being so large, and with me not being allowed to pull into the grass. How would you go about washing the back side of the building with something like this when the hose would not reach the back. If I could get that answered then I would try to save up for a rig exactly like this one based on your recommendation. How much would this exact rig cost if I were to get it? Also, would I buy all of the stuff separate and then have Industrial Cleaning Equiptment in NC build it, or will they order all of the parts and build it themselves and have me pay them one price for the whole thing when it is finished? Thank you so much for all of your videos, you have been such a huge help with me starting everything up. Definely a blessing to me and my family. I work law enforcement in GA as my primary job, and do this on the side and with this extra income, we are about to buy our first house with the extra income we make from pressure washing. I just want to thank you for the wealth of knowledge that you are putting out there for guys like me! You are awesome man, and I am really interested in this exact same set up.
If you dont mind me asking but roughly what was the cost on that whole setup ? Started up a few months and going to rock that 4gpm till the wheels fall off and get the 8gpm setup. Learned a lot from your course as well. Thank you for putting educational videos out and teaching people like myself to feel more comfortable and confident. 💪
Man I like that Ranger! Perfect size. Of course I like the trailer too. Ive been watching you and just a few others sponging as much as I can. Thanks for all the info.
I'm a little behind on your videos brother, great looking rig! I finally upgraded to a Midwest Mixer this season. I absolutely love it! I'm one of those DIY guys who will save a buck and like to know every thread on his rig but I can tell you that this upgrade was well worth the price of admission.
Another great video, Injust started soft wash TV PRO last week and if you are new to the industry like I am don’t waste your time watching a bunch of videos trying to get educated - Kyle’s tv PRO answers all the questions that you have - very comprehensive 👍🏻
Man you inspire me so much man...about to start my soft wash business man and I'll be doing you class...hope to talk to you soon man have tons of questions...starting with my 94 22re toyota and I'm excited man
I’m getting a building built next year and was just wanting to know size garage doors you have on your building. I might go with a flatbed like yours one day and just want to make sure it will fit.
With a downstream injector soft washing houses how many feet of pressure hose can you run before the velocity of water reduces the Venturi effect of the bleach draw ?
@softwashtv I signed up for your softwash training and so far I only have access to a ebook and videos on what equipment to get. Am I missing videos. Where’s the videos that goes over the training of how to soft wash houses?
You should have access to everything. The wash videos are under the Ride Along module. If you are having issues call me directly at United Softwash during our business hours and we can figure it out.
hey brother I'm probably would not get an exact answer for this but about how much for a trailer set up like that I would like to do soft wash and driveways and dumpster pads and I would like to know how much would I have to spend like in the ball park of how much to how much?
Are you using surfactant when down streaming, or are you just spraying SH? Didn’t see how you’re pulling soap with your chem unless you’re batch mixing the 55gal? You’re obviously metering your soft wash mix, so no questions there.
✅ SOFTWASH TV PRO ✅
softwashtv.passion.io
✅ 1 on 1 coaching call with Kyle Maguire ✅
calendly.com/kylemaguire
Is that Midwest xl proportioner for high gpm like comet ? Can you use a 6gpm 12 v ?
Wow thats a nice set up , extremely clean set up .
I love that trailer, the set up is awesome. I need one
I started my pressure washing business a couple of months ago and started with a 4gpm machine that I just ratchet it down to a trailer and pull it off for each job. I currently have a contract with an apartment complex and their buildings are fairly large, each one is 2 story with 8 units. Each apartment is 1200 to 1700 square feet and a large breezeway in the middle. Each apartment also has an outside patio that I have to clean. Each building takes me on average 6 hours to clean, and I can see where the 4 gpm machine is slowing me down, because I spend most of my time just thoroughly washing off my SH and surfactant from the vynyl siding.
I currently only use and xjet with a 25 foot hose to spray my chemical because for 4 of the patios I have to climb a ladder and jump over the railing to clean them, and I like how with an xjet, I can just pull my hose off my gun to stop spray chemical so I don't have to climb over the railing again to take a siphon tube out of a chem bucket for downstreaming and then climg back up the ladder. I am not allowed to drive on the grass with the trailer, which is why I take my pressure washer off the trialer and closer to the building so I can wash the entire building without having to change my water source. I could see a problem with having a system like this with the pressure washer being attached to the trailer, the buildings being so large, and with me not being allowed to pull into the grass. How would you go about washing the back side of the building with something like this when the hose would not reach the back. If I could get that answered then I would try to save up for a rig exactly like this one based on your recommendation.
How much would this exact rig cost if I were to get it? Also, would I buy all of the stuff separate and then have Industrial Cleaning Equiptment in NC build it, or will they order all of the parts and build it themselves and have me pay them one price for the whole thing when it is finished?
Thank you so much for all of your videos, you have been such a huge help with me starting everything up. Definely a blessing to me and my family. I work law enforcement in GA as my primary job, and do this on the side and with this extra income, we are about to buy our first house with the extra income we make from pressure washing. I just want to thank you for the wealth of knowledge that you are putting out there for guys like me! You are awesome man, and I am really interested in this exact same set up.
If you dont mind me asking but roughly what was the cost on that whole setup ? Started up a few months and going to rock that 4gpm till the wheels fall off and get the 8gpm setup. Learned a lot from your course as well. Thank you for putting educational videos out and teaching people like myself to feel more comfortable and confident. 💪
Man I like that Ranger! Perfect size. Of course I like the trailer too. Ive been watching you and just a few others sponging as much as I can. Thanks for all the info.
Sick rig. Rig layout for ease of maintenance and repair is definitely key.
I'm a little behind on your videos brother, great looking rig! I finally upgraded to a Midwest Mixer this season. I absolutely love it! I'm one of those DIY guys who will save a buck and like to know every thread on his rig but I can tell you that this upgrade was well worth the price of admission.
Another great video, Injust started soft wash TV PRO last week and if you are new to the industry like I am don’t waste your time watching a bunch of videos trying to get educated - Kyle’s tv PRO answers all the questions that you have - very comprehensive 👍🏻
What is the cost for a Rig like that??? Thanks buddy love it!
Dude I'm in Clayton nc I love your content would love to meet you
Kyle, If you don't mind me asking but roughly what was the cost on that whole setup? Need one for sure Thank you
Missed your content, glad you're back. 🎉
Man you inspire me so much man...about to start my soft wash business man and I'll be doing you class...hope to talk to you soon man have tons of questions...starting with my 94 22re toyota and I'm excited man
Love that rig my brother 💪🏽
Nice man, Wayne and Brian are awesome over at ICE!
Yes they are!
So do u still have to batch mix with that flopro?
Also, what size is the ag hose you have for the Softwash reel?? Thanks for all the info. I’m new and learning a lot from you already.
One question? where did you buy this? and how much?
Thanks bro. I’m planning to get one someday
Can I ask how much you paid for the trailer rig?
If you don’t mind me asking what’s the blue chemical hose brand ?
What price was that whole rig ?
I’m getting a building built next year and was just wanting to know size garage doors you have on your building. I might go with a flatbed like yours one day and just want to make sure it will fit.
Aluminum trailer the better way to go?
Hello! The Softwash pump on the aluma trailer. I can’t find a 12v 5.3 gpm with 100psi? Remco. Do they still make this?
where can i get that red spray nozzle, i would love to have that.
Very nice! Is that proportioner accurate?
yes it is
great video thank you for the info Mr. Kyle, about to call Patrick ICE
With a downstream injector soft washing houses how many feet of pressure hose can you run before the velocity of water reduces the Venturi effect of the bleach draw ?
my equipment came from ICE..
will your certifaction hold wieght with corporate or government bids?
I got the course about a week ago but can’t seem to be able to download anything. has some had the same problem or is able to help me out?
Any advise to start little business with 4 gallon 4000 thousand psi
Just curious is there a reason you use the 5 gpm remco pump over the 8 gpm ? There isnt a crazy price difference
what size water supply hose do you suggest? 5/8 or 3/4"?
@softwashtv I signed up for your softwash training and so far I only have access to a ebook and videos on what equipment to get. Am I missing videos. Where’s the videos that goes over the training of how to soft wash houses?
You should have access to everything. The wash videos are under the Ride Along module. If you are having issues call me directly at United Softwash during our business hours and we can figure it out.
what lb axle does it have?
Do you do one on one in person ride along training?
Quality!
Thanks Mike!
You know what’s good bro carnitas !!!
Love the setup, where is the flow pro valve? hidden somewhere?
It’s under the rack underneath the high pressure hose reel.
Trailer is sweet!
hey brother I'm probably would not get an exact answer for this but about how much for a trailer set up like that I would like to do soft wash and driveways and dumpster pads and I would like to know how much would I have to spend like in the ball park of how much to how much?
@@BeardedJibaro it’s hard to say bc prices have went up. But I’d say around 18-19k. Give ice a ring they can get you a quote for the same type rig
@@softwashtv6315 yeah I just wanted to know like around the ballpark of how much brother I will give them a call 🙏🏻
5.3 gpm over the 7gpm? How come?
How much did this setup cost you ? i am interested to speak to the co to order one
I'm new to this...... just learning
Can’t find the company that makes this trailer anywhere
@@daltonb09 Google industrial cleaning equipment Wilmington nc pops right up
Are you using surfactant when down streaming, or are you just spraying SH? Didn’t see how you’re pulling soap with your chem unless you’re batch mixing the 55gal? You’re obviously metering your soft wash mix, so no questions there.
hey man love what your doing been following you for years, where do u guys get yardsigns
Thanks for the support! UZ Marketing
What about ladders?
Beautiful trailer
how much for that set up
What happened to the big Ford truck? Haven't seen it in a while.
sold it to buy land in Maine
Hey Kyle. Is that build from industrial or Mud dog? The phone number is linked to mud dog.
It’s the same company bro
Thanks. Sweet build you’ve got there. Looking to replicate.
I love that setup. What is the price on that...I need a back up and that's a great size.
7x10
This due solid gives you get information.
Have you run into any issues with weight restrictions with having a single axle aluminum trailer? And having no brakes on the trailer?
No issues
Damm bro you are speaking my lenguage sick trailer !! I want a big burrito 😂
I really like that set up what is the price on a set up for it
around 17 k
Where you get that remco pump? I can’t find that 100psi pump anywhere. Been stuck with the 60 twice now
Midwest
@@luketabor9842 I finally got the right one ordered from PanHandle
Anyone can point me in the right direction for what size hoses I should utilize with a 4gpm machine
@@Kadinzeidieh 3/8 high pressure gray non marking .
@@softwashtv6315 appreciate it should use 3/8 as well for my dedicated soft wash pump?
Muy buen video saludos
Hi I been watching your videos and I am interested in that buisnes I live in California
Can anyone find Micheal Myers?
Did you ever quit your regular job?
Yes I did. Over two years ago
How much did that rig run ya? Its badass
around 17k